BOLD MAGENTA part numbers are new for 2023 PARTSCANADA.COM 2023 | ATV/UTV EXHAUST 24 DISCLAIMER: SEE PAGE 6 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATION COMPLIANCE AND NOISE REGULATION INFORMATION. DESCRIPTION PART # Straight section heat shield 1861-0148 STRAIGHT SECTION HEAT SHIELD • Uses the same antiballistic composite material construction as custom molded pipeguards and includes stainless steel mounting brackets • The straight section heat shield is designed to fit over the section of pipe that contacts your leg and boot • Many aftermarket manufacturers leave out a heat shield – use ours before you ruin your gear • 6” L to fit most headers on 4-stroke bikes and ATVs • Made in the U.S.A. DESCRIPTION PART # 2” x 36” strip 1861-0153 DESCRIPTION PART # 18” x 18” sheet M30051 HEAT SHIELD • Aluminized heat barrier with adhesive backing • Foil-coated fiberglass cloth adheres to body panels to protect plastic or fiberglass from engine or exhaust heat • One 18” x 18” sheet provides 324 square inches of superior heat protection • Also available in a long narrow strip sized 2” x 36” • Made in the U.S.A. DESCRIPTION PART # For 4” dia. SuperTrapp external disc mufflers 1812-0150 EXHAUST END CAP • Polished end cap for SuperTrapp mufflers • Allows you to open up your exhaust for straight-through flow by simply turning a screw • Slight power gains when used on modified motors • Sold each • Made in the U.S.A. DESCRIPTION PART # BAFFLE ONLY 24” LONG 1.0” dia. 1860-0237 1.25” dia. 1860-0611 1.375” dia. 1860-1727 1.5” dia. 1860-0238 1.625” dia. 1860-0614 1.75” dia. 1860-0461 2.0” dia. 1860-0239 DESCRIPTION PART # BAFFLE ONLY (CONT) 24” LONG (CONT) 2.5” dia. 1860-0240 3.0” dia. 1860-0617 48” LONG 1.0” dia. 1860-0241 1.375” dia. 1860-1729 1.75” dia. 1860-0462 2.0” dia. 1860-0243 DESCRIPTION PART # BAFFLE ONLY (CONT) 48” LONG (CONT) 3.0” dia. 1860-0619 SHEET 6” x 10” 1860-0245 BAFFLE W/ PACKING 24” LONG 1.0” dia. 1860-0463 1.375” dia. 1860-1728 DESCRIPTION PART # BAFFLE W/ PACKING (CONT) 24” LONG (CONT) 1.5” dia. 1860-0464 1.75” dia. 1860-0465 2.0” dia. 1860-0466 2.5” dia. 1860-0467 MUFFLER PACKING ONLY 10” x 12” sheet 1860-0468 UNIVERSAL BAFFLES AND PACKING • Ideal for replacing rusted-out exhaust baffles • Work great for custom fabrication as well • 1.0”, 1.25”, 1.375”, 1.5”, 1.625”, 1.75” and 2.0”OD tubing are 22-gauge stainless steel • 3.0”OD tubing is 16-gauge stainless steel; perforated sheet and 2.5”OD tubing are 20-gauge stainless steel • All have 1/8” diameter holes, 3/16” staggered centers, 33 holes per square inch and 40% open area • 24” long baffles available with or without packing; muffler packing also sold separately • Muffler packing sheet measures 10” x 12”; 5/16” thick • Baffles with packing include two sheets of packing material • All styles sold each • Made in the U.S.A. 1861-0153 M30051 24” long baffles 1860-0245 1860-0463 1860-0468
RkJQdWJsaXNoZXIy NDI5NTY=