WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 15 All part numbers in BLUE are new for 2023. 2023 NEW PRODUCTS 1137 See OLDBOOK For Early Model Applications PART # DESCRIPTION DS-097030 Front T-junction w/ two side inverted flares and center inverted flare; repl. OEM #44310-77 DS-097031 Front T-junction w/ two side inverted flares and center 1/8” NPT; repl. OEM #43308-78 PART # DESCRIPTION DS-097032 Front T-junction w/ two side inverted flares and center inverted flare; repl. OEM #44311-80 DS-097035 Front/rear T-junction w/ two side inverted flares and center 1/8” NPT; repl. OEM #42318-51 DS-097039 Brake line T-junction plugs (10-pk.); repl. OEM #42311-58 BRAKE LINE T-JUNCTIONS • Chromed front/rear brake line T-junctions fit Drag Specialties’ “make-your-own” lines • Replaces non-chrome stock junctions • T’s available separately; plugs sold in packs of 10 PART # DESCRIPTION DS-097024 Flat brake tee 247958 3/8”-24 IF front/universal PART # DESCRIPTION 247959 1/8” NPT female universal DS-097026 3/8”-24 double-banjo bolt (ea.) PART # DESCRIPTION 40509 3/8”-24 single-banjo bolt (ea.) FLAT BRAKE LINE TEE • Durable chrome-plated billet aluminum • Banjo bolt (3/8”-24) design reduces the possibility of over-tightening • Prevents brake lines from rubbing on the front fender; 51/8” wide • Requires the use of a double-shoulder 3/8”-24 banjo bolt and a 3/8”-24 single-shoulder banjo bolt; sold separately • Designed for dual-disc brake system • Made in the U.S.A. PART # DESCRIPTION DS-094098 Brake tee w/ two #3 nipples and a 3/8”-24 inverted flare center hole 1742-0141 Brake tee w/ three 1/8” NPT holes BRAKE LINE TEES • Polished chrome-plated finish • For use with #3 size hose and fittings • Tee is 1/2” thick with 5/16” mounting hole • Sold each PART # DESCRIPTION 49005 3/8”/10mm aluminum banjo sealing washers 49006 7/16” aluminum banjo sealing washers BANJO BOLT WASHERS • Sold in 10-pack • Made in the U.S.A. 49005 PART # DESCRIPTION 1742-0042 Banjo bolt 3/8”/10mm sealing washers BANJO BOLT SEALING WASHERS • High-quality washers include a built-in rubber seal to ensure proper sealing around banjo bolt under various conditions • Sold as 10-pack • Made in U.S.A. PART # DESCRIPTION DS-097014 3/8”/10mm washers; repl. OEM #41731-88 DS-097015 7/16” washers; repl. OEM #41733-88 BANJO BOLT SEALING WASHERS • Washers feature a rubber seal that provides superior sealing around the banjo bolt • Sold in 10-pack PART # DESCRIPTION 1742-0112 Banjo adapter washers BANJO ADAPTER WASHERS • Designed for bikes that already have 7/16” banjos • Enables the use of a 3/8” banjo bolt through a 7/16” banjo fitting (often the black rubber hose types found on late-model OEM controls) without having to remove the existing hoses • Sold in pairs • Made in the U.S.A. NOTE: JX Master cylinders are set up for the use of the more common 3/8” banjo fittings that bolt onto 3/8”-24 threads in the body. 247958 40509 DS-097024 DS-097026 DS-097014 DS-094098 DS-097030 DS-097031 DS-097032 DS-097035 DS-097039
RkJQdWJsaXNoZXIy NDI5NTY=