WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for 2023. SECTION 7 2023 NEW PRODUCTS 426 See OLDBOOK For Early Model Applications DISCLAIMER: SEE PAGE 7 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATION COMPLIANCE AND NOISE REGULATION INFORMATION. PART # DESCRIPTION 1022-0008 Repl. Bosch brand WEGO II oxygen sensor REPLACEMENT WEGO II SENSOR FOR TCFI AUTO-TUNING FUEL INJECTION KITS • Sold each • Made in the U.S.A. PART # DESCRIPTION 1020-0949 For 08-13 FLHT/FLHR/FLTR/FLHX PART # DESCRIPTION 1020-0948 For 01-11 Big Twin and 07-13 XL (except 08-11 Touring models) TWIN TUNER II • Twin Tuner II has all the features of the original Twin Tuner and includes ignition timing control capability • Easily adjusts the OEM Delphi fuel-injection and ignition to match the requirements of performance parts including high-compression pistons/heads, camshafts, free-flowing exhausts, and low-restriction air filters – add 30% or subtract 20% fuel and retard spark timing up to 10° • You can use the mode and up/down push-button switches to make fuel trim adjustments in the rpm and throttle position ranges required by most applications; the fuel trim value is displayed on a bright daylight-readable LED display • The Twin Tuner also has an advanced mode, using the optional USB Interface and PC Link Tuner software to make precise fuel adjustments and allows independent adjustments to the front and rear cylinders • May be compatible with other controller maps • Easy plug-in installation and setup, with no splicing, cutting, crimping or bulky interconnections • Compact size – measures 4” L x 2” W x .5” H • Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software PART # DESCRIPTION 1020-2033 For 01-13 Big Twin and 07-13 XL models w/ 36-pin connector (except 11-13 Softail and 12-13 Dyna) PART # DESCRIPTION 2101-0075 USB interface kit FI-TO-CARBURETOR CONVERSION KIT • Allows most Big Twin and XL models with Delphi EFI to be converted to a carb fuel system • Uses existing wiring harness with no modifications needed • All functions of the turn signal/security module continue to function normally • Includes required software and detailed instructions • Made in the U.S.A. NOTE: Requires the separate purchase of USB interface, PART #2101-0075. NOTE: Requires the separate purchase of a Pingel fuel injection-to-carb tank fitting kit, PART #0705-0031. PART # DESCRIPTION 1022-0224 Twin Scan WEGO Upgrade Kit TWIN SCAN WEGO UPGRADE KIT • Use with any Twin Scan II or III version • Includes WEGO IIID Interface, two Bosch LSU 4.2 wide-band oxygen sensors, two 18 x 1.5mm weld nuts and two 18 x 1.5mm hex socket plugs • Made in the U.S.A. 1020-0949 1020-0948 1020-2033 2101-0075
RkJQdWJsaXNoZXIy NDI5NTY=