WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for 2023. SECTION 8 2023 NEW PRODUCTS 500 See OLDBOOK For Early Model Applications DISCLAIMER: SEE PAGE 7 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATION COMPLIANCE AND NOISE REGULATION INFORMATION. DESCRIPTION PISTON KIT REPL. RINGS REPL. WRIST PIN (EA.) REPL. CIRCLIP (PR.) FOR 99-17 TWIN CAM 88”/96”/103”/106” BORED TO 117 CU. IN. WITH 4.375” STROKE CRANK (EXCEPT TWIN COOLED MODELS) VM-RING PACKAGE (10:1 COMP. FLAT TOP) Std. 0910-52941, 4 - - - FOR 99-17 TWIN CAM 88”/96”/103” BORED TO 1746CC (106 CU. IN.) WITH 4.375” STROKE CRANK (EXCEPT TWIN COOLED MODELS) VM-RING PACKAGE (10:1 COMP. FLAT TOP) Std. 0903-11701, 3, 4 - - - FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (9:1 COMP. REVERSE DOME) ALSO FITS 99-06 TWIN CAM 88 WITH 4.375” STROKER CRANK Std. 0910-52011, 3, 4 0912-0285 - W5752 FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (9.6:1 COMP. REVERSE DOME) ALSO FITS 99-06 TWIN CAM 88 WITH 4.375” STROKER CRANK Std. 0910-52901, 3, 4 0912-0285 - W5752 FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (10.5:1 COMP. REVERSE DOME) ALSO FITS 99-06 TWIN CAM 88 WITH 4.375” STROKER CRANK Std. 0910-52921, 3, 4 0912-0285 - W5752 .010” 0910-52931, 3, 4 - - W5752 FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) X-RING PACKAGE (9:1 COMP. REVERSE DOME); ALSO FITS 99-06 TWIN CAM 88 WITH 4.375” STROKE CRANK Std. - 0912-0145 - W5752 FOR 99-06 TWIN CAM 88 BORED TO 1550CC (95 CU. IN.) VM-RING PACKAGE (9:1 COMP.) Std. 0903-07911 0912-0285 - W5752 FOR 99-06 TWIN CAM 88 BORED TO 1550CC (95 CU. IN.) VM-RING PACKAGE (10.5:1 COMP.) NOTE: Requires Screamin’ Eagle module on fuel-injected models Std. 0903-07871 0912-0285 - W5752 .010” 0903-07891 - - W5752 .020” 0903-07901 - - W5752 FOR 04-22 883 XL BORED TO 1200CC (REVERSE DOME) (9.5:1 COMP.) X-RING PACKAGE Std. K16552 3497X - W5731 .010” K16562 - - W5731 .020” K16572 - - W5731 HIGH-PERFORMANCE FORGED PISTON KITS • Wiseco’s high-tech manufacturing ensures greater operating strength and lower expansion at high temperatures • Kit includes forged pistons with ArmorGlide™ coated skirts, rings, retainer clips, chrome piston pins • Twin Cam pistons have ArmorPlating which improves ring seal, eliminates ring micro-welding and improves the piston’s ability to defend against detonation damage • Piston kits are available with X-Ring package (.062 top ring, .062 compression ring and .158 oil ring) or VM-rings (1.2mm steel, positive twist, gas-nitrided top ring, 1.2mm cast iron, taper under-hook scraper ring and 2.0mm three-piece, flex-vent oil ring with steel chrome-faced rails); VM-rings, X-Rings and XC-Rings will not interchange • 103” kits require cylinder boring; 110” kit requires big-bore cylinders and case boring; recalibration required • Pistons are made in the U.S.A. NOTE: Replacement rings include rings for one piston only. WARNING: Wiseco pistons that use VM-rings can only be fitted with Wiseco VM-rings; Wiseco pistons that use X-rings can only be fitted with Wiseco XC-rings. PART # DESCRIPTION FOR 17-22 M-EIGHT (114”/117”) 0903-1677 4.016” bore x 4.5” stroke , 114” cu. in., 11.0:1 compression 0903-1678 4.075” bore x 4.5” stroke , 117” cu. in., 11.1:1 compression 0903-1679 4.080” bore x 4.5” stroke, 118” cu. in., 11.3:1 compression 0903-1680 4.135” bore x 4.5” stroke,, 121” cu. in., 11.3:1 compression PART # DESCRIPTION FOR 17-22 M-EIGHT CVO (117”) 0903-1674 4.060” bore x 4.5” stroke, 117 cu. in, negative dome (-3.5cc) 11.0:1 compression 0903-1675 4.125” bore x 4.5” stroke, 121 cu. in, negative dome (-6.0cc) 11.0:1 compression 0903-1676 4.250” bore x 4.5” stroke, 124 cu. in, negative dome (-9.8cc) 11.0:1 compression BLACK EDITION PISTON KITS FOR M-EIGHT • Features ArmorX™ piston coating for superior protection in extreme conditions and reduced wear • ArmorFit™ skirt coating auto-adjusts to the cylinder wall so there’s no need to measure clearance; provides smooth, quiet, trouble-free operation • Dome design for improved flame travel to maximize air/fuel burn efficiency • High compression for added power • Superfinish piston pin reduces friction and improves scuff resistance • Enhanced pin oiling for improved lubrication and reduced friction • Augmented ring land details improve ring seal and function • Dedicated rings for precise fit, improved compression and oil control • Fits OEM and Screamin’ Eagle cylinder heads (unless noted) 1 Includes top-end gasket kit. 2 08-21 models will require the use of 1200cc cylinders. 3 Fits 11-17 Screamin’ Eagle heads. 4 Kit includes ArmorX/AutoFit pistons. • Kit includes two pistons, rings, piston pins and circlips • Made in the U.S.A. 0903-1674 0903-1677 K1655
RkJQdWJsaXNoZXIy NDI5NTY=