WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 8 All part numbers in BLUE are new for 2023. 2023 NEW PRODUCTS 523 See OLDBOOK For Early Model Applications DISCLAIMER: SEE PAGE 7 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATION COMPLIANCE AND NOISE REGULATION INFORMATION. PART # DESCRIPTION FOR 05-17 88”/96”/103” TWIN CAM, 04-22 XL (EXCEPT 21-22 SPORTSTER S/RH1250S, 22 NIGHTSTER/RH975), 09-12 XR 1200 0926-1468 7°, 7mm valve stem w/ stock triple keeper groove (includes steel retainers) 0926-3323 7°, 7mm valve stem w/ stock triple keeper groove (includes titanium retainers) PART # DESCRIPTION FOR 99-04 TWIN CAM AND 86-03 XL 0926-1467 7°,5/16” valve stem w/ stock keeper groove (includes steel retainers) 0926-3322 7°,5/16” valve stem w/ stock keeper groove (includes titanium retainers) ECONO BEEHIVE® VALVE SPRING KITS • Made from premium stress-relieved conical ovate wire • Feature extremely high-level of fatigue life • Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion • Designed to handle the demands of performance engines with .585” and smaller lift camshafts • Available for 5/16” and 7mm valves • PART #s 0926-1467 and 0926-1468 include Econo BeeHive® valve springs, lightweight 7° steel retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system • PART #s 0926-3322 and 0926-3323 include Econo BeeHive® valve springs, lightweight 7° Ti retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system • Seat lb./installed height; 183 lb. at 1.760” (0.510” lift), 175 lb. at 1.785” (0.535” lift), 172 lb. at 1.803” (0.553” lift), 165 lb. at 1.825” (0.574” lift), 163 lb. at 1.835” (0.585” lift), 380 lb. at 1.250” OPEN HEIGHT coil bind at 1.180” • Dyno proven and track tested • Feuling® BeeHive® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs • Made in the U.S.A. NOTE: Econo BeeHive® kits are direct replacement with no machining or rocker box clearance required for cams up to .574” lift for 99-04 Big Twin and 86-03 XL and up to .585” lift for 05-17 Twin Cam. PART # DESCRIPTION FOR 17-22 M-EIGHT 0926-2973 Standard, 6mm valve stem (uses factory retainers) PART # DESCRIPTION FOR 05-17 88”/96”/103” TWIN CAM, 04-22 XL, 09-12 XR 1200 (EXCEPT 21-22 SPORTSTER S/RH1250S, 22 NIGHTSTER/RH975) 0926-0852 7°, 7mm valve stem w/ stock triple keeper groove ENDURANCE BEEHIVE® VALVE SPRINGS WITH TITANIUM RETAINERS • Machined from premium-grade hi-tensile chrome silicon single-conical ovate wire • Shot-peened with specially processed thermal heat treat and super NexTex® finish for fatigue life needed to exceed high demands of V-Twin engines • Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion • Direct bolt-in replacement up to .650” cam lift; no machining or rocker box clearancing required • Available for 7mm and 6mm valves • Kits include: Endurance BeeHive® valve springs, lightweight 7° super Titanium heat-treated retainers, machined spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system • Twin Cam specs: seat lb./installed height; 198 lb. at 1.685” (.535” lift), 194 lb. at 1.703” (.553” lift), 190 lb. at 1.724” (.574” lift), 187 lb. at 1.754” (.604” lift), 185 lb. at 1.780” (.630” lift), 160 lb. at 1.800” (.650” lift), 375 lb. at 1.150” (open height) coil bind at 1.100” • M-Eight specs: seat lb./installed height; 134 lb. at 1.375” (.405” lift), 127 lb. at 1.405” (.435” lift), 125 lb. at 1.415” (.445” lift), 121 lb. at 1.435” (.465” lift), 116 lb. at 1.455” (.485” lift), 113 lb. at 1.470” (.500” lift), 109 lb. at 1.490” (.520” lift), 103 lb. at 1.520” (.550” lift), 226 lb. at .970” (open height), coil bind at .920” • Feuling® BeeHive® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs • Made in the U.S.A. NOTE: Feuling® BeeHive® valve spring kits are direct replacement with no machining or rocker box clearance required up to .574” lift for 98-04 Big Twin and 86-03 XL and up to .650” lift for 05-17 Twin Cam. Larger camshafts require valve guide machining for seal to retainer clearance. 0926-1467 0926-3323 0926-0852 0926-2973
RkJQdWJsaXNoZXIy NDI5NTY=