WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for 2023. SECTION 13 2023 NEW PRODUCTS 894 See OLDBOOK For Early Model Applications CHROME PART # BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 99-13 FLHT/FLHX/FLHTCUTG/FLHXXX 0601-5099 0601-5100 10” 39” 12” 7” 0601-5101 0601-5102 12” 39” 12” 61/2” 0601-5103 0601-5104 14” 39” 12” 7” CHROME PART # BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 99-13 FLHT/FLHX/FLHTCUTG/FLHXXX (CONT) 0601-5105 0601-5106 16” 39” 12” 8” 0601-5107 0601-5108 18” 39” 12” 8” 11/2” TRADITIONAL APE HANGER HANDLEBARS • A beefier version of the traditional ape hanger • Classic four-bend design • Accommodates both electronic and cable throttles • Designed for internal wiring CHROME PART # GLOSS BLACK PART # FLAT BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK 0601-4468 0601-4469 0601-4470 8” 331/2” 7” 6” 0601-4471 0601-4472 0601-4473 10” 331/2” 7” 6” 0601-4474 0601-4475 0601-4476 13” 331/2” 7” 6” CHROME PART # GLOSS BLACK PART # FLAT BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK 0601-4477 0601-4478 0601-4479 16” 331/2” 7” 6” 0601-4480 0601-4481 0601-4482 19” 331/2” 7” 6” 11/2” GRANDE TWIN PEAKS HEFTY HANDLEBARS • Features a 11/2” diameter in the handlebar clamping area • 11/2” risers and clamp required for mounting, sold separately • 31/2” on-center knurled clamping area • Will work with hydraulic clutches • Mitered top with a traditional two-bend bottom • Slotted for internal wiring CHROME PART # GLOSS BLACK PART # FLAT BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 14-22 FLHT/FLHX/FLHXS/FLHXST/FLHTCUTG 0601-4615 0601-4616 - 8” 361/2” 10” 51/4” 0601-4618 0601-4619 - 10” 361/2” 10” 51/4” 0601-4621 0601-4622 - 12” 361/2” 10” 51/4” 0601-4624 0601-4625 - 14” 361/2” 10” 51/4” 0601-4627 0601-4628 - 16” 361/2” 10” 51/4” 0601-4630 0601-4631 - 18” 361/2” 10” 51/4” FOR 15-22 FLTRXS/FLTRXST/FLTRU/FLTRK 0601-4504 0601-4505 0601-4506 10” 351/2” 7” 6” 0601-4507 0601-4508 0601-4509 13” 351/2” 7” 6” CHROME PART # GLOSS BLACK PART # FLAT BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 15-22 FLTRXS/FLTRXST/FLTRU/FLTRK (CONT) 0601-4510 0601-4511 0601-4512 16” 351/2” 7” 6” 0601-4513 0601-4514 0601-4515 19” 351/2” 7” 6” FOR 99-13 FLHT/FLHX AND TRIKES 0601-4483 0601-4484 0601-4485 8” 351/2” 9” 51/4” 0601-4486 0601-4487 0601-4488 10” 351/2” 9” 51/4” 0601-4489 0601-4490 0601-4491 12” 351/2” 9” 51/4” 0601-4492 0601-4493 0601-4494 14” 351/2” 9” 51/4” 0601-4495 0601-4496 0601-4497 16” 351/2” 9” 51/4” 0601-4498 0601-4499 0601-4500 18” 351/2” 9” 51/4” 11/2” GRANDE TWIN PEAKS TOURING HANDLEBARS • Handlebar with an emphasis on touring comfort • More parallel wrist angles for a perfect pullback angle and stress-free riding • Flowing bends on the uprights designed specifically for Batwing fairing bikes • Slotted for internal wiring • Works with hydraulic clutches • Integrated clamp design replaces the stock riser clamp and risers • Can be used on cable and TBW (Throttle-By-Wire) applications • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. • Notched for Throttle-By-Wire capability • Made in the U.S.A. NOTE: Not for use with stock riser and handlebar clamp/ gauge mount on XL 883C/1200C models. NOTE: Accept H-D OEM heated grips. • Double-wall design for added strength • Integrated clamp design replaces stock riser clamp and risers NOTE: Accept H-D OEM heated grips. 0601-5104 0601-5105 0601-4468 0601-4475 0601-4615 0601-4508
RkJQdWJsaXNoZXIy NDI5NTY=