WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for 2023. 2023 NEW PRODUCTS NP75 See OLDBOOK For Early Model Applications VALVE LOCK KEYS • Machined steel locks • Standard height groove 5/16" valve stems • 7° with square groove • Made in the U.S.A. • See page 525 of the 2023 Parts Canada FatBook for the entire line of Feuling valve lock keys HP+® ONE-PIECE PUSHRODS • Feuling highly recommends using one-piece pushrods instead of adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues • Fixed length, 4130 chromoly one-piece pushrods with swedged formed ends • Heavy-duty 7/16" diameter tube with a wall thickness of 0.165" • Heat-treated with a black oxide finish • Made in the U.S.A. • See page 528 of the 2023 Parts Canada FatBook for the entire line of Feuling HP+ one-piece pushrods NOTE: Requires removal of rocker covers and rocker arms for installation. VALVE SPRING SEAT SHIMS • Set valve spring open height to match camshaft lifts for optimum valve-train stability and performance • Includes four 0.060" thick shims and four 0.015" thick shims with 1.500" OD (outside diameter) and 0.645" ID (inside diameter) • Made in the U.S.A. • See page 525 of the Parts Canada FatBook for the entire line of Feuling valve spring seat shims REAR CAM OUTER CHAIN SPROCKETS • Machined steel, stock replacement roller chain drive sprockets fit 07-17 Twin Cam engines as direct replacements and work on early 99-06 engines when upgrading to the hydraulic cam chain tensioners using the roller chain • Made in the U.S.A. • See page 559 of the 2023 Parts Canada FatBook for entire line of Feuling cam chain drive sprockets REPLACEMENT NUT FOR QUICK-INSTALL PUSHRODS • For Feuling Quick-Install pushrod PART #s 0928-0105 and 0928-0106 see page 732 of the 2023 Parts Canada FatBook • Sold each • Made in the U.S.A. PART # DESCRIPTION 0926-3368 For 99-04 Twin Cam and 86-03 XL; repl. OEM #18229-83 PART # DESCRIPTION FOR 99-17 TWIN CAM 0928-0116 For use with Feuling® Short-Travel lifters and designed to work with factory base circle camshaft dimensions (works with Feuling® 525, 543 and 574 cam grinds) 0928-0117 For use with Feuling® Short-Travel lifters and designed to work with smaller base circle camshafts (works with Feuling® 594 and 630 cam grinds) PART # DESCRIPTION 0930-0237 For 99-17 Twin Cam and 86-17 XL PART # DESCRIPTION FOR 99-01 TWIN CAM MOTORS 0925-1371 For engines with Magneti Marelli ignition using updated hydraulic chain drive system with 07-17 style outer chain, 34 tooth 0925-1370 For engines with Magneti Marelli ignition using factory 99-06 style outer chain, 34 tooth PART # DESCRIPTION 0928-0120 7/16"-20 repl. nut 0928-0116 0925-1371 SHORT SUMP PLUGS • A common issue with both Twin Cam and M-Eight engines (more common with M-Eight) is the sump plug can block off the internal scavenge (return) pick up port • By using a shorter plug, we eliminate the possibility of the plug blocking off this cross port • The further the bottom plug installs into the case, the more of the scavenge cross port is blocked off • Fuel plug is 0.265” tall vs. OEM 0.465” • Made in the U.S.A. PART # DESCRIPTION FOR 17-22 M-EIGHT, 99-17 TWIN CAM MOTORS 0950-0990 Short sump plug (ea.) 0950-0991 Short sump plugs (6-pk.) DISCLAIMER: SEE PAGE 7 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATION COMPLIANCE AND NOISE REGULATION INFORMATION.
RkJQdWJsaXNoZXIy NDI5NTY=