EVOLUTION BIG TWIN • SHOVELHEAD • PANHEAD KNUCKLEHEAD • FLATHEAD • IRONHEAD XL E • • F • OldBook 2023 - 2024 TM Canadian Catalogue
2023 Drag Specialties OldBook Bike— Drag Specialties is excited to feature a 1967 Harley-Davidson FL customized by Mark Shadley of Shadley Bros. Motorcycles, as the 2023-24 OldBook cover bike. The Shadleys, lifelong enthusiasts and fulltime custom bike builders, are well-known for their many high-quality, strong running custom bike builds. “I had this bike on hand when the conversation started with Drag Specialties about a cover bike build,” Shadley said. “The bike is a generator-model Shovelhead motor; these were only available in a four-year period: 1966 thru 1969, so it is a somewhat rare bike to start with; it was a very good candidate for the build.” The stock displacement was 74”. “This one has been punched out to 93”,” said Shadley, “to give it ON THE COVER a little more wind.” It is modified with S&S Super Stock™ cylinder heads and an S&S flywheel to give it the added cubic inches and power output. The transmission gears are a close-ratio 4-speed set from Andrews. “I got the transmission kit right out of the Drag Specialties catalogue,” Shadley said. A stronger clutch setup and transmission sprockets also went into the improved, rebuilt drivetrain. Shadley added an electronic ignition system and a later-model style starter. He also upgraded the charging system, the wiring and used LED lights for the signals and brake lights. “When you build a bike for Drag Specialties, you focus on what is available in the catalogue,” Shadley said. “There is a lot in there! The idea is to make the build accessible, not stray too far. I wanted to add some modern touches, but still keep the build looking correct for the time period.” Pictured is the 2023-24 Drag Specialties OldBook cover bike build team (L-R): Bobby Shadley, Paul Shadley, Mark Shadley and Dean Shadley.
partscanada.com | #SINCE1968 The rear end features a “juice brake” setup. “It is a drum brake, but it is hydraulic powered,” Shadley said. “And it is all on the left side. The front rotor is also on the left side. So when you park the bike on the side stand, you get a really clean, uncluttered look.” Being a builder, he did customize or modify some parts to fit his ideas. “The exhaust system I built,” Shadley said. “I started with a Paughco exhaust pipe and modified to be a ‘crush pipe’ (a system that has a header run inside the frame) and added a bit of a kickup at the end. I did some work to shape the oil tank – extensions and length to the sides.” He also made the center tank panel that runs the length of the tank and houses the gauges. The chain guard brackets and ignition coil cover also got some custom touches. “I am really, really happy with the look of that front end,” Shadley said. “I really wanted that cleaned up, to get away from the style of a bike that has that heavy front headlight nacelle cover with the fork tins.” A different set of triple trees and a custom headlight to clean up and give the front end a more open, narrower appearance. “I also changed the angle of the brake pedal a bit, so it sat with a better line. And I made modifications so I could install a set of later-model floorboards on the bike and get a more interesting look and style,” he said. The paint scheme was inspired by the Drag Specialties blue. “I chose colours that would complement that blue, the classic Drag Specialties colour,” Shadley said. “The silver is real silver leaf inlay to give it some added pop. And the logo on the tank was inspired by the Drag Specialties logo I saw on an old original business card.” The best part? “I get to keep it, it’s mine!” Shadley laughed. “I built it like all my custom bikes – to be a bike you can ride. Once it is returned from being shown by Drag Specialties, I look forward to being able to put some miles on it.” Builder & Painter: Mark Shadley, (Shadley Bros. Motorcycles) WE SUPPORT THE SPORT®
14. Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . 651-691 15. Tanks & Oil Filters. . . . . . . . . . . . . . . . . . . . 692-722 16. Dashes & Gauges. . . . . . . . . . . . . . . . . . . . 723-743 17. Frames & Suspension. . . . . . . . . . . . . . . . . . 744-785 18. Fenders & License Plate Frames. . . . . . . . . . 786-805 19. Footrests & Floorboards. . . . . . . . . . . . . . . . 806-851 20. Wheels & Axles.. . . . . . . . . . . . . . . . . . . . . 852-861 21. Hardware, Covers & General. . . . . . . . . . . . . 862-887 OEM Cross Reference.. . . . . . . . . . . . . . . . . . . . 888-905 VIN Guide.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 906-909 Drag Specialties Quick Reference Chart. . . . . . . . 910-911 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 912-942 Terms & Conditions. . . . . . . . . . . . . . . . . . . . . . 943-946 1. Windshields & Fairings.. . . . . . . . . . . . . . . . . . . 8-47 2. Audio, Communication & Mounts.. . . . . . . . . . . 48-76 3. Saddlebags & Luggage.. . . . . . . . . . . . . . . . . 77-148 4. Seats & Sissy Bars.. . . . . . . . . . . . . . . . . . . . 149-187 5. Exhaust. . . . . . . . . . . . . . . . . . . . . . . . . . . 188-227 6. Fuel/Air Systems. . . . . . . . . . . . . . . . . . . . . 228-257 7. Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . 258-316 8. Transmission & Driveline.. . . . . . . . . . . . . . . 317-370 9. Gaskets & Seals.. . . . . . . . . . . . . . . . . . . . . 371-390 10. Electrical.. . . . . . . . . . . . . . . . . . . . . . . . . . 391-455 11. Lighting.. . . . . . . . . . . . . . . . . . . . . . . . . . . 456-532 12. Handlebars, Controls & Mirrors. . . . . . . . . . . 533-615 13. Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . 616-650 OldBoook 20232 - 20243 TM Please Note: All Evolution Sportsters are in the 2022 FatBook™. All Evolution Big Twins are in THIS catalog. 3 o ™ ue.
5 IMPORTANT INFORMATION RELATING TO MANUFACTURER’S WARRANTY, EMISSION CONTROL REGULATION AND NOISE REGULATION INFORMATION: DISCLAIMER: There is no warranty on exhaust pipes and mufflers with regard to any discolouration. Discolouration (blueing) is caused by tuning characteristics, i.e. timing, carburetor, fuel injection/controller settings, etc., and is not caused by defective manufacturing. See the Tires, Tools and Chemicals catalogue for products that will help prevent and remove blueing. DISCLAIMER: Products shown may be designed, manufactured, intended and sold for closed circuit race use only and use of the same on public roads or lands may be a violation of local and/or provincial laws. DISCLAIMER: A number of regions have exhaust noise laws. Exhaust products advertised might not be legal for sale or use on public roads or lands in such jurisdictions. Check applicable laws and regulations. DISCLAIMER: Check your applicable laws and manufacturer’s publication(s) and/or website(s) for manufacturer’s warranty, maintenance, safety, mounting and any regulatory compliance/non-compliance information.
8 Windshields.. . . . . . . . . . . . . . . . . . . . . . . . . 9-31 Fairings.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-40 Fairing Trim. . . . . . . . . . . . . . . . . . . . . . . . . . 41-43 Brackets And Mounts.. . . . . . . . . . . . . . . . . . . 44-45 Windscreen Fasteners/Well Nuts.. . . . . . . . . . . . . 45 Fairing Pouches/Windshield Bags. . . . . . . . . . . 46-47 Handlebar Bags. . . . . . . . . . . . . . . . . . . . . . . . . 47 WINDSHIELDS & FAIRINGS
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 9 See FATBOOK For Late Model Applications FLARE™ WINDSHIELDS continued on next page. FLARE™ WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Lexan® Polycarbonate with FMR hard coating is used to create these custom-molded designs with unmatched durability • All are predrilled for easy mounting using stock windshield hardware Wind tunnel designed and tested 11.5” 6.5” 8.5” • Made in the U.S.A. NOTE: The black version may not be suitable for shorter riders as it’s an opaque material. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192.
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 10 See FATBOOK For Late Model Applications PART # DESCRIPTION FOR 96-98 FLHT, FLHTC MODELS 2310-0225 11.5” tint 2310-0226 11.5” clear 2310-0633 11.5” dark smoke 2310-0715 10.5” clear 2310-0716 10.5” tint 2310-0717 10.5” dark smoke 2310-0273 8.5” tint 2310-0274 8.5” dark smoke 2310-0275 8.5” black 2310-0211 6.5” tint 2310-0212 6.5” dark smoke 2310-0213 6.5” black PART # DESCRIPTION FOR 96-98 FLHT, FLHTC MODELS (CONT) 2310-0223 3.5” dark smoke 2310-0224 3.5” black FOR 86-95 FLHT, FLHTC MODELS 2310-0209 6.5” dark smoke FOR 98 FLTR MODELS 2310-0482 14” dark smoke 2310-0481 14” tint 2310-0194 12” tint 2310-0358 12” dark smoke 2310-0207 8” tint 2310-0214 8” dark smoke 2310-0196 8” black 2310-0196 8” Black 2310-0207 8” Tint 2310-0211 6.5” Tint 2310-0212 6.5” Dark smoke 2310-0358 12” Dark smoke FLARE™ WINDSHIELDS (CONT)
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 11 See FATBOOK For Late Model Applications PART # DESCRIPTION FOR 84-92 FXRP 2310-0635 Dark smoke 2310-0636 Black PART # DESCRIPTION FOR 84-92 FXRT 2310-0704 Dark smoke FOR 83-93 FXRP SPORT 2310-0714 Black 9” FLARE WINDSHIELDS • All of the great features of the original Flare windshield now available in versions for the increasingly popular early FXRP models • Made in the U.S.A. 2310-0636 2310-0635
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 12 See FATBOOK For Late Model Applications FOR 86-99 FLSTC, 90-99 FLSTF, WITH OEM ACCESSORY DETACHABLE KING SIZE NOSTALGIC WINDSHIELD (201/4” TALL X 261/2” WIDE) PART # DESCRIPTION 2310-0346 Clear FOR 90-99 FLSTF, 86-99 FLSTC WITH OEM ACCESSORY DETACHABLE KING-SIZE WINDSHIELD PART # DESCRIPTION 20” TALL X 263/8” WIDE 2310-0340 Clear 17” TALL X 263/8” WIDE 2310-0389 Clear FOR 94-98 FLHR WITH OEM ACCESSORY DETACHABLE KING-SIZE WINDSHIELD PART # DESCRIPTION 193/8” TALL X 265/8” WIDE 2310-0342 Clear 163/8” TALL X 265/8” WIDE 2310-0387 Clear 2310-0388 Tint FLARE™ BILLBOARD WINDSHIELDS • Modeled after the original Flare™ windshield for Baggers, now almost every rider can get all of the same performance and style with bolt-on ease • With patented Klock Werks “hips” on the side and a flip at the top, shields have been wind tunnel designed and tested to produce the same amount of additional down force as original • Real world testing and computer simulation also produced multiple heights that will work for most riders; heights listed are measured from headlight opening to top of shield • All are predrilled for easy mounting using stock or Klock Werks windshield mounting kits • For the following applications “Detachable” refers to the old-style H-D grommet/hinge style mechanism • Made in the U.S.A. NOTE: All measurements given are approximate. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. 2310-0340 2310-0342 2310-0388
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 13 See FATBOOK For Late Model Applications PART # DESCRIPTION FOR 96-98 FLHT/FLHTC/FLHX AND H-D FL TRIKE MODELS 2310-0733 6.5” orange 2310-0734 6.5” yellow 2310-0735 6.5” red 2310-0736 6.5” green 2310-0737 6.5” blue PART # DESCRIPTION FOR 98 FLTR, FLTRX MODELS 2310-0718 8” orange 2310-0719 8” yellow 2310-0720 8” red 2310-0721 8” green 2310-0722 8” blue ICE KOLORED FLARE™ WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Windshields are made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. PART # DESCRIPTION FOR 98 FLTR, FLTRX MODELS 2310-0748 12” tint 2310-0749 12” dark smoke FLARE™ WINDSHIELDS • Pro Touring style available • The Pro Touring Flare™ is a wider, more full-coverage option for riders and passengers looking for greater wind protection during long-haul touring, yet is stylish enough for use around town • The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) • The “flip” at the top of the Flare™ kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger • Wind tunnel tested and designed for maximum performance and air management • Made of Lexan® Polycarbonate with FMR hard coating on both sides of the shield for unmatched durability • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. NOTE: The black version may not be suitable for shorter riders as it’s an opaque material. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0719 2310-0721 2310-0733 2310-0735 2310-0737 2310-0748 2310-0749
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 14 See FATBOOK For Late Model Applications PART # DESCRIPTION 15” TALL MEM4110 Clear MEM4119 Solar PART # DESCRIPTION 17” TALL MEM4210 Clear MEM4219 Solar MEMPHIS SLIM • Slimmed-down version of Memphis Fats is 18” wide • Come in clear or solar (a light tint with 72% visible light transmission) • Available in 15” and 17” heights • Fits standard headlight size (53/4” – 7”) • Made of Lucite® for excellent optics and durability • Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws • Mounting kit must be purchased separately; see pages 20-21 • Optional Lowers available for additional windshield coverage; see page 19 • Made in the U.S.A. MEM4110 MEM4219
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 15 See FATBOOK For Late Model Applications PART # DESCRIPTION 13” TALL MEM3110 Clear 15” TALL 2313-0064 Clear 2313-0072 Solar PART # DESCRIPTION 17” TALL MEM3210 Clear MEM3219 Solar 19” TALL MEM3310 Clear PART # DESCRIPTION 19” TALL (CONT) MEM3319 Solar 21” TALL MEM3410 Clear MEM3419 Solar MEMPHIS FATS • Features traditional American styling • Available in clear or solar (a light tint with 72% visible light transmission) • Made from Lucite® for excellent optics and durability • 22” W with five standard heights to choose from • Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws PART # DESCRIPTION 15” TALL 2313-0049 Clear PART # DESCRIPTION 17” TALL 2313-0054 Clear PART # DESCRIPTION 19” TALL 2313-0059 Clear MEMPHIS FATS WITH BIG HEADLIGHT CUTOUT • Features a 9.5” cutout with a custom shape that is designed for a perfect fit on the large nacelle headlights made by Arlen Ness, Rick Doss and others • Popular American styling in clear • Made from Lucite® for excellent optics and durability • 22” W with three standard heights • Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws • No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black, see pages 20-21 • Optional Lowers available for additional windshield coverage, see page 19 • Made in the U.S.A. 2313-0054 Clear • For standard headlight size (53/4” – 7”) • No-Tool detachable Trigger-Lock mounting kits must be purchased separately; see page 20-21 • Optional Lowers available for additional coverage; see page 19 • Made in the U.S.A. MEM3110 MEM3219 MEM3419
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 16 See FATBOOK For Late Model Applications MEMPHIS FATS (22” WIDE; 9” HEADLIGHT CUTOUT) PART # DESCRIPTION 13” 2313-0003 Clear 15” 2313-0073 Clear 2313-0081 Solar PART # DESCRIPTION 17” MEM3620 Clear MEM3629 Solar 19” MEM3710 Clear PART # DESCRIPTION 19” (CONT) MEM3719 Solar 21” MEM3810 Clear MEM3819 Solar MOUNTING KITS PART # DESCRIPTION FOR 94-98 FLHR/FLHRI/FLHRCI 2320-0048 Polished PART # DESCRIPTION FOR 94-98 FLHR/FLHRI/FLHRCI (CONT) 2320-0049 “Night Shades” black MEMPHIS SLIM (18” WIDE; 9” HEADLIGHT CUTOUT) PART # DESCRIPTION 15” MEM4120 Clear PART # DESCRIPTION 15” (CONT) MEM4129 Solar PART # DESCRIPTION 17” MEM4220 Clear MEMPHIS FATS/SLIM FOR ROAD KING • Features traditional American styling available in clear or solar (a light tint with 72% visible light transmission) • Made from Lucite® for excellent optics and durability • Memphis Slim and Fats have a 9” cutout and fit 94-98 FLHR/FLHRI/FLHRCI Road King applications only; see MOUNTING KIT chart for details • Memphis Slim are 18” W and available in 15” or 17” heights • Memphis Fats are 22” W with five standard heights to choose from • Windshield straps are available in polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws or the “Night Shades” black version which is a gradient black windshield with black E-coated stainless steel straps, fittings and hardware for a black-on-black sinister look • No-Tool detachable Trigger-Lock mounting kit must be ordered separately; available in polished or “Night Shades” black, see chart below • Made in the U.S.A. Trigger-Lock Mounts let you remove or change Memphis Shades Fats or Slim Windshields in a moment’s time MEM3620 MEM3819 MEM4120 MEM4129 2320-0048
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 17 See FATBOOK For Late Model Applications PART # DESCRIPTION MEP5810 Clear PART # DESCRIPTION MEP5811 Black PART # DESCRIPTION MEP5819 Solar CUSTOM LOWERS • Provide additional protection by extending your coverage downward • Shield rider from rain, wind and noise coming up from the road • Made of the same high-quality materials as Memphis Shades windshields with matching tints • Available in black, as well as clear and solar (a light tint with 72% visible light transmission) • Must purchase Lowers mounting kits; see page 19 • May require turn signal relocation • Measure 8” H x 5 – 51/2” W • Sold in pairs • Made in the U.S.A. MEP5810 MEP5811 MEP5819
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 18 See FATBOOK For Late Model Applications PART # DESCRIPTION MEP5319 Solar RIO GRANDE • The most coverage of any windshield in the Sportshield family • Made of Lucite® for excellent optics and durability • Available in solar (a light tint with 72% visible light transmission) • Measures approximately 21” W x 19” H above headlight • Fits most round headlights • Optional Lowers available for additional windshield coverage; see page 19 • Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash • Must order mounting kit separately; see pages 20-21 • Made in the U.S.A. PART # DESCRIPTION MEP5219 17” PART # DESCRIPTION MEP5229 19” EL PASO • Smooth design complements the lines of your machine • Tapered windshield lower is ideal for handlebar-mounted turn signals • Made of Lucite® for excellent optics and durability • Available in solar (a light tint with 72% visible light transmission) • Measures approximately 20” W; available in 17” or 19” H above headlight • Fits most round headlights • Optional Lowers available for additional windshield coverage; see page 19 • Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash • Must order mounting kit separately; see pages 20-21 • Made in the U.S.A.
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 19 See FATBOOK For Late Model Applications PART # DESCRIPTION MEP5119 Solar DEL RIO • Good torso protection in a sleek windshield design • Made of Lucite® for excellent optics and durability • Available in solar (a light tint with 72% visible light transmission) • Measures approximately 19” W x 15” H above headlight • Fits most round headlights • Optional Lowers available for additional windshield coverage; see page 19 • Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash • Must order mounting kit separately; see pages 20-21 • Made in the U.S.A. PART # DESCRIPTION MEP5019 Solar DEL REY • Small, sleek design that offers good protection in a minimalist package • Made of Lucite® for excellent optics and durability • Available in solar (a light tint with 72% visible light transmission) • Measures approximately 15” W x 13” H above headlight • Fits most round headlights • Optional Lowers available for additional windshield coverage; see page 19 • No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black, see pages 20-21 • Made in the U.S.A. PART # DESCRIPTION 2313-0089 Solar SPEED DEMON • Offers more protection with a sporty look • Features a similar shape and style to the popular handlebar mount “Demon” shield, but with the benefits of easier installation and faster removal due to the exclusive Sportshield mounting system • Measures 21” W and 18” H above the headlight; fits a 7” or 9” headlight cutout • Made of Lucite® for excellent optics and durability • No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black; see pages 20-21 • Made in the U.S.A.
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 20 See FATBOOK For Late Model Applications MEMPHIS FATS AND SLIM DESCRIPTION POLISHED BLACK FATS/SLIM LOWERS HARDWARE For 86-99 FLSTC (w/o OEM light bar) 2320-0089 2320-0091 MEM9891 For 86-99 FLSTC (w/ OEM light bar) 2320-0021 2320-0044 MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/o OEM light bar) 2320-0089 2320-0091 MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/ OEM light bar) 2320-0021 2320-0044 MEM9891 For 93-96 (w/o OEM light bar) 2320-0089 2320-0091 MEM9891 For 93-96 (w/ OEM light bar) 2320-0021 2320-0044 MEM9891 For 88-99 FLSTSC/FXSTS (w/ light bar)1, 2 2320-0027 2320-0081 - For 88-65 FLSTSC/FXSTS (w/o light bar)1 2320-0027 2320-0081 - For 80-86 FXWG, 84-99 FXST 2320-0013 2320-0078 MEM9888 For 91-99 FXD, FXDL 2320-0011 2320-0077 MEM9884 For 93-98 FXDWG 2320-0013 2320-0078 MEM9888 For 80-86 FXWG and wide (111/2” to 12” wide) forks 2320-0013 2320-0078 MEM9888 For 82-94, 99-00 FXR 2320-0011 2320-0077 MEM9884 For 73-85 FX/FXE/FXS 2320-0011 2320-0077 MEM9884 For 73-85 XL (except 883L/1200X/11-16 1200C, 17 1200CX) 2320-0011 2320-0077 MEM9884 1 88-92 Springer models require headlight relocation kit PART #DS-280339. 2 Light bar must be a curve style to allow installation of the upper bolt and spool assembly. NO-TOOL TRIGGER-LOCK MOUNT KITS FOR MEMPHIS SHADES FATS/SLIM AND SPORTSHIELDS • Gone are the days of fumbling with tools to remove your windshield • The revolutionary No-Tool Trigger-Lock hardware features an innovative system that allows you to quickly and easily remove your windshield without the use of any tools • A pair of latches lock the windshield down until the spring loaded “trigger locks” are intentionally disengaged, allowing the rider to remove the windshield • Hardware is fully adjustable to achieve just the right windshield angle • Kits are a combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors • Kits are custom-fit to each style of bike for a truly no-hassle installation • Made in the U.S.A. Trigger-Lock Mounts let you remove or change Memphis Shades Fats/Slim/ Sportshield windshield in a moment’s time PLATES-ONLY KITS • Allow changing from Fats/Slim to Sportshield or from Sportshield to Fats/Slim without purchasing the entire mounting hardware INDEPENDENT LOWERS KITS • Mounts Memphis Shades Lowers to most motorcycles • Each kit contains two fork clamp/mounting assemblies and all necessary hardware to mount Lowers plastic • Kits can be used with select Memphis Shades windshields and several OEM windshields • Sold in pairs; must order Lowers plastic separately 2320-0013 MEM9884 FATS/SLIM TRIGGER-LOCK MOUNT KITS
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 21 See FATBOOK For Late Model Applications 2320-0071 PART # DESCRIPTION MEM1719 Solar HELL CAT • Sculpted full-body shape • Measures 20” W x approximately 18” H above headlight • Fits most round headlights • Made of Lucite® for excellent optics and durability • Available in solar (a light tint with 72% visible light transmission) • Included two-point mounting hardware consists of polished billet aluminum handlebar clamp that fits 1” and 7/8” handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws • Optional 11/4” handlebar clamps sold separately (PART #MEM9950) • Made in the U.S.A. NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. PART # DESCRIPTION MEM2210 Clear PART # DESCRIPTION MEM2219 Solar DEMON • Measures 21” W x 18” H above headlight • Fits most round headlights • Made of Lucite® for excellent optics and durability • Available in clear or solar (a light tint with 72% visible light transmission) • Included two-point mounting hardware consists of polished billet aluminum handlebar clamps that fit 1” and 7/8” handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws • Optional 11/4” handlebar clamps sold separately (PART # MEM9950) • Made in the U.S.A. NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. MEM2210 MEM2219 SPORTSHIELDS DESCRIPTION POLISHED BLACK PLATES-ONLY TO CHANGE FROM SPORTSHIELD TO FATS/SLIM POLISHED SPORTSHIELD LOWERS HARDWARE For 86-99 FLSTC (w/o Original Equipment light bar) 2320-0020 2320-0071 - MEM9891 For 86-99 FLSTC (w/ Original Equipment light bar) 2320-0022 - 2320-0025 MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/o Original Equipment light bar) 2320-0020 2320-0071 - MEM9891 For 90-99 FLSTF (w/ Original Equipment light bar) 2320-0022 - 2320-0025 MEM9891 For 93-96 FLSTN (w/o Original Equipment light bar) 2320-0020 2320-0071 - MEM9891 For 93-96 FLSTN (w/ Original Equipment light bar) 2320-0022 - 2320-0025 MEM9891 For 88-99 FLSTSC/FXSTS (w/ light bar)1, 2 2320-0028 - - - For 88-99 FLSTSC/FXSTS (w/o light bar)1 2320-0028 - - - For 91-98 FXD, FXDL 2320-0012 2320-0069 - MEM9884 For 93-98 FXDWG 2320-0014 2320-0070 - MEM9888 For 80-86 FXWG and wide (111/2” to 12” wide) forks 2320-0014 2320-0070 - MEM9888 For 82-94, 99-00 FXR 2320-0012 2320-0069 - MEM9884 For 73-85 FX/FXE/FXS 2320-0012 2320-0069 - MEM9884 For 73-85 XL (except 883L/1200X/11-17 1200C, 17 1200CX) 2320-0012 2320-0069 - MEM9884 For other narrow forks 81/2” to 9” (with 35mm-42mm forks) 2320-0012 2320-0069 - - For other wide forks 111/2” to 12” (with 35mm-42mm forks) 2320-0014 2320-0070 - - 1 88-92 Springer models require headlight relocation kit PART #DS-280339. 2 Light bar must be a curve style to allow installation of the upper bolt and spool assembly. NO-TOOL TRIGGER-LOCK MOUNT KITS FOR MEMPHIS SHADES FATS/SLIM AND SPORTSHIELDS (CONT) SPORTSHIELDS TRIGGER-LOCK MOUNT KITS
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 22 See FATBOOK For Late Model Applications PART # DESCRIPTION MEM1619 Solar THE SHOOTER • Looks great on today’s wide-body motorcycles • Measures 19” W x approximately 14” H above headlight • Fits most round headlights • Made of Lucite® for excellent optics and durability • Available in solar (a light tint with 72% visible light transmission) • Included two-point mounting hardware consists of polished billet aluminum handlebar clamps that fit 1” and 7/8” handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws • Optional 11/4” handlebar clamps sold separately (PART #MEM9950) PART # DESCRIPTION MEM2129 Solar CLASSIC DEUCE • Smooth shape surrounds headlight to become part of the motorcycle • Measures approximately 191/2” W x 181/2” H above headlight • Made of Lucite® for excellent optics and durability • Available in solar (a light tint with 72% visible light transmission) • Solid two-point handlebar mounting hardware fits many custom and stock applications • Includes two-point mounting hardware consisting of polished billet aluminum handlebar clamps that fit 1” and 7/8” handlebars (with sizing band) and CNC-machined aluminum rake plates, fittings and stainless steel socket-head screws • Optional 11/4” handlebar clamps sold separately (PART #MEM9950) • Made in the U.S.A. NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. PART # DESCRIPTION MEM9950 11/4” handlebar clamps (pr.) 11/4” HANDLEBAR CLAMPS • Allow you to mount a Memphis Shades Classic Deuce, Hell Cat, Demon or The Shooter to a bike with 11/4” handlebars • Sold in pairs • Made in the U.S.A. • Made in the U.S.A. NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield.
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 23 See FATBOOK For Late Model Applications DESCRIPTION 5” 7” 9” 12” 15” FOR 96-98 FLHT Black 2310-0003 - - - - Solar 2310-0004 2310-0254 - - MEP8139 Clear - 2310-0255 MEP8110 MEP8120 MEP8130 FOR 86-95 FLHT/FLHTC Black 2310-0001 - - - - Solar 2310-0002 2310-0262 - - - Clear - - MEP8010 - - REPLACEMENT WINDSHIELDS FOR BAGGERS • Available in black, clear or solar (a light tint with 72% visible light transmission) • Made of Lucite® for excellent optics and durability • Available in multiple heights • Use the OEM hardware for a perfect fit • See page 44 for matching deflectors • Made in the U.S.A. 2310-0002 2310-0003 5” Solid Windshield MEP8130
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 24 See FATBOOK For Late Model Applications COLOR 5” 5.5” 6.5” 8.5” 9” FOR 98 FLTR Smoke - - 2310-06001 2310-06061 - Dark smoke - 2310-05951 2310-06011 2310-06081 - Black opaque - 2310-05961 2310-06021 - - FOR 96-98 FLHT Smoke 2350-0173 - 2350-0176 - 2350-0179 Dark smoke 2310-0664 - 2310-0665 - 2310-0666 1 Not recommended for use with metal windshield trim. SPOILER WINDSHIELDS FOR OEM FAIRINGS • Designed to be looked over, the spoiler windshield diffuses the air stream effectively slowing the flow, without buffeting • Made of aircraft-grade Lucite® for excellent optics and durability • Uses OEM hardware for a perfect fit • Made in the U.S.A. 2310-0596 2310-0666 2350-0173
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 25 See FATBOOK For Late Model Applications DESCRIPTION 15” 17” 19” 21” FOR 94-98 FLHR W/ OEM WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-0010 2310-0019 2310-0028 2310-0037 Solar 2310-0018 2310-0027 2310-0036 2310-0045 REPLACEMENT PLASTIC FOR HARLEY-DAVIDSON® WINDSHIELDS • Now riders can replace their OEM windshield with the size and color of their choice • Available in clear or solar (a light tint with 72% visible light transmission) • Made of Lucite® for excellent optics and durability • Available for five models in up to four different heights – pick a size that’s right for you • Perfect fit with OEM hardware • Holes are not drilled but rather machined to accept snap-in nylon inserts that prevent stress fractures and star cracks commonly seen around holes – an exclusive feature of Memphis Shades replacement plastic • Made in the U.S.A. DESCRIPTION 15” 17” 19” 21” FOR 84, 99-00 FXR, 91-98 FXD W/ OEM ACCESSORY DETACHABLE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-0082 2310-0091 2310-0100 - Solar 2310-0090 2310-0099 2310-0108 - Due to variations in OEM mounting hardware, these windshields may not fit all models; be sure to check measurements before ordering. VERTICAL STRAPS There is a right and left strap, although they measure the same. HORIZONTAL STRAPS The windshield should have one of the two straps illustrated. Straps shown for reference only. NOTE: Measurements are approximate and measured center to center of holes on the outside of windshield. REPLACEMENT PLASTIC FOR HARLEY-DAVIDSON® WINDSHIELDS continued on next page. 2310-0010
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 26 See FATBOOK For Late Model Applications DESCRIPTION 15” 17” 19” 21” FOR 86-98 FXWG, 84-99 FXST, FXSTC, FXSTB, 93-98 FXDWG W/ OEM ACCESSORY QUICK-RELEASE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-0492 2310-0501 2310-0510 - Solar 2310-0500 - - - DESCRIPTION 15” 17” 19” 21” FOR 93-99 FLSTS, FXSTS W/ OEM ACCESSORY DETACHABLE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-0136 2310-0145 - - DESCRIPTION 15” 17” 19” 21” FOR 90-99 FLSTF, 90-99 FLSTC, 93-96 FLSTN W/ OEM ACCESSORY DETACHABLE KING SIZE WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-0046 2310-0055 2310-0064 2310-0073 Solar 2310-0054 2310-0063 2310-0072 2310-0081 DESCRIPTION 15” 17” 19” 21” FOR 86-98 FXWG, 84-99 FXST, 93-98 FXDWG W/ OEM ACCESSORY DETACHABLE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-0109 - 2310-0127 - Solar 2310-0117 - 2310-0135 - REPLACEMENT PLASTIC FOR HARLEY-DAVIDSON® WINDSHIELDS (CONT)
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 27 See FATBOOK For Late Model Applications REPLACEMENT PLASTIC FOR MEMPHIS SHADES WINDSHIELDS • Replacement plastic is a low-cost alternative to replace worn or damaged Memphis Shades • Available in clear or solar (a light tint with 72% visible light transmission) • Made of Lucite® for excellent optics and durability • Available for standard headlight size of 53/4” – 7” headlights • Replacement plastic does not include any hardware PART # DESCRIPTION 15” REPLACEMENT PLASTIC 2313-0082 Clear 2313-0084 Solar 17” REPLACEMENT PLASTIC MEP3210 Clear PART # DESCRIPTION 19” REPLACEMENT PLASTIC MEP3310 Clear MEP3319 Solar 21” REPLACEMENT PLASTIC MEP3410 Clear MEMPHIS FATS FOR 53/4” – 7” HEADLIGHTS • Sportshield replacement plastic has same part numbers as found on pages 18-19 • Made in the U.S.A. PART # DESCRIPTION FOR MEMPHIS FATS (11 MOUNTING BOLTS) 2321-0094 Polished stainless steel 2321-0096 Black E-coated stainless steel PART # DESCRIPTION FOR MEMPHIS SLIM (9 MOUNTING BOLTS) 2321-0095 Polished stainless steel 2321-0097 Black E-coated stainless steel MEMPHIS FATS AND SLIM WINDSHIELD STRAPS • The same high-quality straps that come with the Fats or Slim series windshields • Available in polished stainless steel or a custom black E-coated stainless steel • All fasteners required to mount the straps to the windshield are included • Made in the U.S.A. MEP3210 MEP3319 MEP3410 2321-0094 2321-0096 PART # DESCRIPTION 3508-0041 Batwing fairing bag BATWING FAIRING STORAGE BAG • Constructed of 600-denier “tool bag” material and lined with faux Sherpa to ensure a mar-free surface • Safe way to carry or store Memphis Shades Batwing fairing • Convenient handle to carry windshield/fairing or hang out of harm’s way • Will hold one Memphis Shades Batwing fairing with mounting plates and windshield installed PART # DESCRIPTION 3508-0042 Windshield bag WINDSHIELD/FAIRING STORAGE BAG • Constructed of 600-denier “tool bag” material and lined with faux Sherpa to ensure a mar-free surface • Safe way to carry or store Memphis Shades windshields or small fairings • Convenient handle to carry windshield/fairing or hang out of harm’s way • Will hold one Memphis Fats/Slim, Sportshield or fairing (Bullet, Gauntlet, Cafe) with or without mounting plates installed • Also fits most OEM HD windshields, including Road King windshield
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 28 See FATBOOK For Late Model Applications PART # DESCRIPTION FOR 96-98 FLHT/FLHTC S13410 10” clear S13413 13” clear S1356 6” tint S1358 8” tint S13510 10” tint S13513 13” tint PART # DESCRIPTION FOR 86-95 FLHT/FLHTC 13010C 10” clear 13013C 13” clear 13110T 10” tint FOR 98 FLTR S-139-15 15” tint REPLACEMENT HARLEY-DAVIDSON WINDSHIELDS • The 130 series windshields are exact replacements for H-D Touring models • Available in clear and tinted finishes in several different sizes • Made of tough 3/16” aircraft-quality Lucite® acrylic for optically perfect vision • Made in the U.S.A. 13110T S13413 S1358 S-139-15 PART # DESCRIPTION 2313-0092 Clear 2313-0093 Dark smoke S-114-C Optional 11/4” handlebar hardware kit SS-20 STEALTH • Provides excellent protection with an eye-catching look • Features flowing, sculptured curves and anodized aluminum handlebar clamps that fit 1” handlebars • Available in clear and dark smoke • Made in the U.S.A. 2313-0093 PART # DESCRIPTION 17” H X 23” W CLEAR WINDSHIELD W/ BLACK HARDWARE 2313-0204 W/ standard fork mounting system (28-41mm fork tubes w/ 9”-10.5” fork span) SS-30 CLASSIC WINDSHIELD • Complement your rider’s style with this sleek design • Versatile quick-release mounting system fits many different bikes with standard fork tubes or oversized fork tubes • DOT compliant • Made in the U.S.A.
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 29 See FATBOOK For Late Model Applications PART # DESCRIPTION SS-10-C Clear w/ 7/8” and 1” hardware SS-10-T Smoke w/ 7/8” and 1” hardware PART # DESCRIPTION S1-C Repl. 1” handlebar clamp kit S-114-C Optional 11/4” handlebar clamp kit VIPER • Uses the same quick-release mounting system as the Spitfire shield • Larger shield for added protection • Dimensions: 221/4” W x 171/4” H • Made in the U.S.A. S-114-C SS-10-C PART # DESCRIPTION S06-C1 Clear w/ 7/8” and 1” hardware 5021881 Tint w/ 7/8” and 1” hardware 2313-0120 Clear w/ 1” hardware PART # DESCRIPTION 2313-0121 Tint w/ 1” hardware S1-C Repl. 1” handlebar hardware kit S-114-C Optional 11/4” handlebar clamp kit 1 Include spacers to work with 7/8” or 1” bars. SPITFIRE • Distinctive looks and streamlined protection in a small fairing • Constructed of 1/8” acrylic with red graphics • Fully adjustable; mounts/dismounts in seconds • Dimensions: 15” H x 171/2” W • Made in the U.S.A. PART # DESCRIPTION S1-C 1” round bar adapters HANDLEBAR ADAPTERS • Round style • Made in the U.S.A. S06-C 2313-0121
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 30 See FATBOOK For Late Model Applications PART # DESCRIPTION BULLET (14” W) 2311-0006 15” clear PART # DESCRIPTION BULLET (14” W) (CONT) 2311-0007 18” clear PART # DESCRIPTION B-WING (19” W) 2311-0008 15” clear BILLET SERIES WINDSHIELDS • A unique approach to wind protection; available in two sizes • Mirror polished, chrome-plated, billet aluminum universal hardware mount; one bracket fits both 7/8” and 1” handlebars • Shield adjusts up/down; hardware mount adjusts left/right and rotationally • Made in the U.S.A. PART # DESCRIPTION DS-710360 Clear DS-710361 Smoke PART # DESCRIPTION HD-0HDW Repl. 1” handlebar hardware kit S-114-C Optional 11/4” handlebar hardware kit MINI POLICE WINDSHIELD • Medium-size windshield; 1” hardware included • Universal handlebar clamp mounting • Fits most H-D models using 1” buckhorn or pullback-style handlebars and a 53/4” headlight • Measures 141/2” wide, 15” from headlight to top • Made in the U.S.A. PART # DESCRIPTION HD3-DC Dark smoke HD3-C Clear PART # DESCRIPTION S1-C Repl. 1” handlebar hardware kit S-114-C Optional 11/4” handlebar clamp kit TOMBSTONE • A nostalgic design that gives your bike a one-of-a-kind American style • Shield mounts/d ismounts in short order due to an advanced quick-release system • 10” W, 135/8” from headlight cutout to top and 14” high overall • 1” handlebar hardware included • Made in the U.S.A. S-114-C HD3-C HD3-DC 2311-0007 2311-0008 DS-710361
WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 31 See FATBOOK For Late Model Applications PART # DESCRIPTION FOR 96-98 FLHT 2310-0639 Light smoke PART # DESCRIPTION FOR 96-98 FLHT (CONT) 2310-0640 Medium smoke 6” PANORAMIC VENTED WINDSHIELDS • Aerodynamically engineered to create a smooth flow of air • Dramatically reduces buffeting • Adjustable updraft vent can be opened or closed • Super-tough polycarbonate construction with hardcoat to greatly reduce scratching • Ciro’s vented panoramic design adds style and protection • Curved top lip helps deflect air more efficiently over the rider and passenger 2310-0640 PART # DESCRIPTION FOR 96-98 FLHT MODELS 2310-0593 5” PART # DESCRIPTION FOR 96-98 FLHT MODELS (CONT) 2310-0651 7” AIRMASTER® DARK SMOKE WINDSHIELDS • Manufactured from premium-quality, optically-clear, hard-coated polycarbonate in dark smoke • Polycarbonate will not crack or shatter upon impact PART # DESCRIPTION DS-710318 For 60-65 FL REPLACEMENT WINDSHIELD • High-quality windshield features a beaded edge • Available in color combination clear/blue • Kit comes with mounting hardware NOTE: Mounts to OEM spotlight bar.
RkJQdWJsaXNoZXIy NDI5NTY=