WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 17 764 See FATBOOK For Late Model Applications PART # DESCRIPTION 0414-0597 For 97-98 FLHT/FLHR/FLTR (41mm forks) (+2” raised) AXEO HIGH-PERFORMANCE FRONT SUSPENSION SYSTEMS (FOR USE WITH +2” OEM FORK TUBES) • Designed to be used with stock diameter front wheels • Easy installation • Includes two mono-tube, dual chambered damper cartridges and two top out springs • Performance spring rate • Machined 303 Stainless threaded pre-load adjuster • Increased pre-load range allows the tuning for various riding styles and weights • Ride quality is smooth and controlled • Improves stability, cornering and traction • Eliminates front-end dive during aggressive braking and maneuvering • Firm feel for high-speed sweeping turns • Eliminates bottoming out on large bumps or potholes AXEO 39TS HIGH-PERFORMANCE FRONT SUSPENSION SYSTEMS (REQUIRES +2” FORK TUBES) • Innovative through shaft design is first of its kind in front fork application, not like others offering spring drop in or nitrogen • Easy installation • Includes two mono-tube damper cartridges and two top out springs • Unique through-shaft technology so there is no rod pressure at the end of the stroke • Utilizes a two-stage management system controlling fluid flow and high pressure • Compression and rebound flow rate is managed via high-flow damper piston and deflective disc set • Secondary high pressure control system, using precision load rated wave springs, allowing spike overpressure to bypass, protecting the deflective disc’s precision valve opening limits • Through shaft eliminates the rod pressure in-and-out issues plus piston rod is always in fluid • Two precision linear bearings support both sides of the rod and piston assembly • Proprietary performance main spring • Machined 303 stainless threaded preload adjuster • Increased pre-load range allows fine tuning for various riding styles and weights • 5” of travel PART # DESCRIPTION 0414-0591 For 87-94, 99-00 FXR (39mm fork tubes) (+2” height) AXEO39TS HIGH-PERFORMANCE FRONT END SUSPENSION SYSTEM (FOR USE WITH +2” OEM FORK TUBES) • Innovative through-shaft design is first of its kind in front fork application, not like others offering spring drop-in or nitrogen • Easily installation • Includes two mono-tube, damper cartridges and two top-out springs • Unique through-shaft technology so there is no pressure at end of stroke • Utilizes a two-stage management system controlling fluid flow and high pressure • Compression and rebound flow rate is managed via high-flow damper piston and deflective disc set • Secondary high pressure control system, using precision load-rated wave springs, allowing spike overpressure to bypass, protecting the deflective disc’s precision valve opening limits • Through-shaft eliminates the rod pressure in-and-out issues, plus piston rod is always in fluid • Two precision linear bearings support both sides of the rod and piston assembly • Proprietary performance main spring • Machined 303 stainless threaded preload adjuster • Increased preload range allows fine tuning for various riding styles and weights • 5” of travel • Ride quality is smooth and controlled • Improves stability, cornering and traction • Eliminates front-end dive during aggressive braking and maneuvering • Firm feel for high-speed sweeping turns • Eliminates bottoming out on large bumps or potholes • Reduces dragging pegs • Designed for optimum performance with Legend rear suspension system • Maintains stock hydraulic bump stop • Made in the U.S.A. NOTE: This kit is designed to be used with OEM fork tubes. NOTE: Due to the nature of the design, this front end kit will raise the overall height of the motorcycle. • Ride quality is smooth and controlled • Improves stability, cornering, and traction • Eliminates front-end dive during aggressive braking and maneuvering • Firm feel for high-speed sweeping turns • Eliminates bottoming out on large bumps or potholes • Reduces dragging pegs • Designed for optimum performance with Legend rear suspension system • Maintains stock hydraulic bump stop • Made in the U.S.A. NOTE: Requires the use of aftermarket +2” (26.25” L) upper fork tubes. NOTE: Not compatible with all models, check fitment chart on www.dealer.dragspecialties.com. NOTE: Additional parts required for FXR applications; OEM NO. 45361-90. NOTE: Due to the nature of the design, this front-end kit will raise the overall ride height of the motorcycle. PART # DESCRIPTION 0414-0547 For 87-94, 99-00 FXR (except FXRS CON/SP), 91-98 FXD • Reduces dragging floorboards and pegs • Designed for optimum performance with Legend rear suspensions • Made in the U.S.A. NOTE: These products are NOT designed for use with 21” and 23” wheels. NOTE: Requires the use of OEM fork tubes PART NO. 83804-09 (22.55” L). NOTE: Requires the additional purchase of OEM PART NOs. 45419-80 (two) and 45733-48 (two) for installation.
RkJQdWJsaXNoZXIy NDI5NTY=