BOLD MAGENTA part numbers are new for 2023 PARTSCANADA.COM 2023 | SNOW TOOLS & HARDWARE 424 DESCRIPTION PART # Gauge and filler P572 Nitrogen needle set 3805-0012 DESCRIPTION PART # Repl. nitrogen needle 3805-0155 NITROGEN SHOCK GAUGE, FILLER AND NEEDLE • 300-psi capacity • Regulator and transfer hose required to get nitrogen from tank to nitrogen Shock Gauge and Filler • Bleeder valve and T-handle plunger pin chuck • Swivel chuck has a 12” flexible hose • Instructions, carrying box and Schrader valve extension included (required on some Showa shocks) • Nitrogen needle is used to fill shocks with self-sealing rubber valves (some Yamaha, Fox and Öhlins) • Instructions included • Made in the U.S.A. WARNING: For use by trained professional mechanics only! Improper use could result in great bodily injury or death. DESCRIPTION PART # Single tool 631679 DESCRIPTION PART # Five-piece kit 3850-0230 DELUXE SPRING PULLER • Designed to remove/install exhaust springs • Made from tough 3/8” steel rod • Available as a single tool or in a five-piece kit • Single tool measures 12” long with a 20 degree ergonomic bend • Five-piece kit includes 12” tool with a 20 degree bend, 10” curved tool, 9” straight tool, 5” straight tool with horizontal hook and 5” straight tool with vertical hook DESCRIPTION PART # 10” L spring hook tool 550544 SPRING TOOL • Redesigned for a better grip • Works on hard-to-reach, tight spaces • Easily push, pull and twist springs on and off DESCRIPTION PART # Heavy-duty spring hook MP08-127 DESCRIPTION PART # Mini spring hook 3850-0212 SPRING HOOKS • Used to remove exhaust pipe springs, seat or tank holding springs, cotter pins, sidestand springs and other parts • Mini spring hook tool’s ergonomic handle provides a secure grip at every angle, and compact size provides easy access 3850-0230 P572 3805-0012 MP08-127 3850-0212 DESCRIPTION PART # Shock spring compressor 3805-0137 SHOCK SPRING COMPRESSOR • Safely removes the spring on most coilover shocks • Includes adapters for both clevis- and eyelet-type shocks • Adapter plates adjust to fit spring retaining collars from 56mm to 96mm • Innovative, compact, easy-to-use design • Low-friction radial thrust bearing DESCRIPTION PART # Pivot suspension vise 3805-0148 PIVOT SUSPENSION VISE • Designed to make suspension service simple and quick • Holds shocks and forks securely while you change oil, re-valve, or change seals • Pivoting head holds parts in any position, with mechanical stops every 45° • Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4-point grip system • Large side holds 39mm to 69mm diameter parts • Small side holds 14mm to 39mm diameter parts • Steel frame is rigid yet has a small footprint, with four pre-drilled holes in the base for secure mounting to a bench • Movable fluid catch pan with mesh insert, and threaded drain bung • Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip • Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassemblyand is an excellent platform for adding, adjusting and taking fork oil level measurements • Can be used to assist in removing fork compression valve assembly (use of stock front axle required) • Holds shock firmly around shock body, shaft or shock reservoir • Facilitates removal of piston rod and seal head • Facilitates removal of shock reservoir caps, chamber pistons or bladder • Holds shock to remove spherical bearings or needle bearings • Holds shocks for removal of shock spring DESCRIPTION PART # Maxhook spring hook 3850-0039 MAXHOOK SPRING HOOK • Strong and versatile push-pull spring hook • PVC-coated T-handle provides plenty of leverage for even the most stubborn springs • Hardened steel with CNC-machined tip
RkJQdWJsaXNoZXIy NDI5NTY=