BOLD MAGENTA part numbers are new for 2023 PARTSCANADA.COM 2023 | STREET FUEL/AIR SYSTEMS 984 DISCLAIMER: SEE PAGE 6 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATION COMPLIANCE AND NOISE REGULATION INFORMATION. ENGINE CONTROL MANAGER FOR INDIAN FTR1200, FTR1200 RALLY 19-20 • Unlocks the hidden ride modes on your motorcycle • Lets you switch between Rain, Standard and Sport modes with the press of a button • Handlebar-mount switch for convenient access • Plug-and-play installation DESCRIPTION PART # 50-state legal 1020-3474 DESCRIPTION PART # For off-road/closed-course use only 0616-0366 FITS MODEL PART # CAN-AM Spyder 14-19 1020-3143 HONDA Grom MSX125 14-20 1020-3033 Monkey 125 19-20 1020-3136 CB300/CBR300 18-19 1020-3214 CB/CBR650 21 1020-3478 CRF1000L Africa Twin 16 1020-3198 FITS MODEL PART # INDIAN Models w/ Thunderstroke 111” 14-21 1020-3036 Scout 15-21 1020-3035 Scout Sixty 17-21 1020-3037 FTR1200 19-20 1020-3185 FITS MODEL PART # VICTORY Octane 17 1020-3035 YAMAHA FZ-07/MT-07 14-20 1020-3137 Tracer 700 17-19 1020-3147 XSR700 16-20 1020-3146 FZ/MT-09 14-20 1020-3039 FITS MODEL PART # YAMAHA (CONT) FZ-10/MT-07 14-20 1020-3144 FJ-09 15-17 1020-3040 XSR900 16-20 1020-3145 Tracer 900 15-20 1020-3040 R1 15-19 1020-3171 R6 17-20 1020-3186 POWER VISION 3 • Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU • Display vehicle data channels in real-time • Weather-resistant for use in all conditions • High-contrast display, viewable in direct sunlight • Fueling revised for maximum power and torque • Spark timing optimized for 91-93 octane fuel • Rev limit raised • Speed limit raised NOTE: All Power Vision returns and/or adjustments must be made directly with Dynojet Research. POWER COMMANDER V • Fuel control for each individual cylinder in a smaller enclosure • ”Warm-up” fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading) • Reduced size from the PCIII USB • Easy to install • USB-powered from computer; 9V adapter is no longer needed • Two-position map-switching function built in • Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps • Gear/speed input allows for map adjustment based on gear • Analog input allows user to install any 0-5 volt sensor • Build an adjustment table based on analog input such as boost or temperature • Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected • More tuning ranges than PCIII USB • Enhanced “accel pump” utility • For Offroad and ATV, see appropriate catalog under Moose Power Commanders SECONDARY FUEL MODULE • Allows for the adjustment of all eight injectors • Connects to the upper injector rail using OEM connectors • Single cable connection to the PCV 0616-0366 1020-3474 1020-2082 SFM PCV QEM • Adjust both upper and lower injectors by as much as +250/-100% • If gear position input is connected to your PCV, you can adjust all of the injectors on a “per gear” basis • You can also map each injector separately, giving you up to 48 complete maps • The “basic”mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time • The “basic”mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately • Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes, which provides added fuel control and shifter functionality • See application chart for availability QUICK SHIFTER EXPANSION MODULE • The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors • The QEM connects to the upper injectors and then into the PCV • Once the sensor is attached you will have full Quick Shifter functionality NOTE: QEM is not necessary if using the SFM. 1020-3033
RkJQdWJsaXNoZXIy NDI5NTY=