BOLD MAGENTA part numbers are new for 2023 TUBES & ACCESSORIES PARTSCANADA.COM TIRE & SERVICE | 2023 277 INNER TUBE FAILURE COULD RESULT IN DEATH OR SERIOUS INJURY. ALLOW ONLY TRAINED PERSONNEL TO INSTALL INNER TUBES. WARNING RIM SIZE FITS TIRE SIZE(S) STEM TYPE PART # STANDARD INNER TUBES 10” 2.50-10, 2.75-10 TR-4 0350-0019 12” 2.50-12, 80/100-12 TR-4 0350-0020 14” 60/100-14 TR-4 0350-0021 15” 180/70-15, 140/90-15, 150/90-15, 170/80-15 TR-87C 0350-0176 16” 120/90-16, 130/90-16, 140/90-16, 150/80-16, MT90-16 PV-78 501880 16” MT90-16, MU90-16, MU85-16, 120/90-16, 130/90-16, 140/90-16, 150/80-16, 160/80-16 TR-4 16-E2 17” 130/70-17, 140/70-17, 130/80-17, 120/90-17 TR-4 17-CD 17” 130/90-17, 140/80-17, 150/70-17, 160/70-17 TR-4 508369 18” 3.25/3.50-18, 90/90-18, 100/90-18, 110/80-18 TR-6 18-BF 18” 100/90-18, 110/80-18, 110/90-18, 120/80-18, 120/90-18, 130/70-18, 130/80-18, 140/80-18, 3.25-18, 3.50-18, 4.00-18, 4.10-18, 4.50-18 TR-4 508373 19” 130/70-19, 110/90-19 TR-4 501783 21” 80/90-21, 80/100-21, 90/90-21, 90/100-21, 2.50-21, 2.75-21, 3.00-21 TR-4 21AB STANDARD TUBES FOR SUPERMOTARD 17” 140/80-17 TR-4 0350-00181 SPECIAL TRIALS TUBE 18” 4.00-18 TR-4 501779 21” 2.75-21 TR-4 501788 INNER TUBES • MICHELIN® Airstop tubes are used by those who want the very best • Features an overlap splice which is stronger than the butt splice used in most others • Splice is always placed opposite the valve, which helps to provide a more balanced tube • For Valve Stem Types, see page 275 RIM SIZE FITS TIRE SIZE(S) STEM TYPE PART # HEAVY-DUTY TUBES FOR MX/ENDURO 14” 90/100-14 TR-4 14CHM 16” 90/100-16 TR-4 16CHM 17” 70/100-17 TR-4 17CHM 18” 100/100-18, 110/100-18, 120/90-18, 130/80-18, 140/80-18 TR-4 501165 19” 70/100-19 TR-4 19CHM 19” 120/80-19, 100/90-19 TR-4 501167 21” 2.75-21 TR-4 21CH 1 A heavier tube reinforced to withstand the added stress from sliding the rear in corners. RIM SIZE FITS TIRE SIZE STEM TYPE PART # 18” 100/100-18, 110/100-18, 120/90-18, 130/80-18 TR4 0350-0023 19” 100/90-19, 110/90-19, 120/80-19, 130/70-19 TR4 0350-0024 RIM SIZE FITS TIRE SIZE STEM TYPE PART # 21” 90/90-21, 80/100-21 TR4 0350-0025 ULTRA HEAVY-DUTY INNER TUBES • Reinforced tubes for off-road applications • Features a 4mm wall thickness • Provides enhanced protection against punctures and pinch flats • For Valve Stem Types, see page 275 TIRE SIZE RIM SIZES PART # FRONT 80/100-21 1.85 BM-01 90/90-21 1.85 BM-01 90/100-21 1.85 0350-00611 REAR 120/90-18 2.50-2.152 BM-53 TIRE SIZE RIM SIZES PART # REAR (CONT) 140/80-18 (enduro) 2.50-2.152 BM-54 140/90-18 (desert race) 2.50-2.152 BM-55 100/90-19 2.15-1.852 BM-51 110/90-19 2.50-2.152 BM-52 1 For StarCross HP4 tires only. 2 Fitting allowed on the listed narrower rim width, but difficult. DESCRIPTION PART # Bib Mousee® Mounting Gel 3607-0015 BIB MOUSSE® • Made from a multi-cellular butyl material, Bib Mousse® replaces conventional tubes, providing a pressure equivalent of approximately 13 psi • Specifically designed for off-road competition use, at speeds up to 80 mph (130 km/h) – above this speed, heat buildup can lead to rapid destruction of the Bib Mousse©, resulting in serious injury to the rider – under no circumstances should Bib Mousse® be fitted to motorcycles for on-road use • Bib Mousse® may be used only with MICHELIN® off-road tires, including StarCross HP4, StarCross MS3, StarCross MH3, S12 XC, M12 XC and Desert Race – because Bib Mousse® is shaped for a perfect fit inside these MICHELIN® tires (see sizing chart below); use of Bib Mousse® with other brands of tires can lead to handling instability and possible destruction of the Bib Mousse® • Each Bib Mousse® includes a tube of Bib Mousse® Mounting Gel; installer must be sure to follow installation instructions supplied with the product • Gel also available separately in 12-pack, 50g tubes DESCRIPTION PART # Bib Mousse® Mounting Gel 3607-0015 BIB MOUSSE® MOUNTING GEL • Use when installing or reinstalling a MICHELIN® Bib Mousse® • 50g tube • Sold in 12-pack
RkJQdWJsaXNoZXIy NDI5NTY=