BOLD MAGENTA part numbers are new for 2023 PARTSCANADA.COM 2023 | TIRE & SERVICE SERVICE & MAINTENANCE TOOLS 384 DESCRIPTION PART # BPF Rod Guide Wrench 41/43mm 3805-0192 BPF ROD GUIDE WRENCH • Used to remove internal rod guide on Showa BPF 41 and 43mm forks • Black oxide finish • 43mm side replaces Honda OEM tool 070MB-MGPA100, Kawasaki OEM tool 57001-1758 and Suzuki OEM tool 09940-84710 • 41mm side replaces Honda OEM tool 070MB-MCJ0100, Kawasaki OEM tool 57001-1742 and Suzuki OEM tool 09910-84711 DESCRIPTION PART # Fork alignment tool 3801-0115 FORKTRU FORK ALIGNMENT TOOL • Quick and easy-to-use tool for aligning front forks to ensure they are parallel from top to bottom • Knurled adjustment screws for easy setup • Proper alignment reduces stiction, enhancing fork performance • Reduces seal and bushing wear • Fits most MX and off-road motorcycles (does not work on most sport bikes due to large brake rotor diameter and 17”wheel diameter) • Will work on 27mm-62mm fork legs and tubes • Works on forks that are 140mm to 220mm (5.5”-8.6”) on center DESCRIPTION PART # For 24, 32 and 41mm fork caps 3805-0053 For 45 and 49mm Showa BPF fork caps 3805-0078 FORK CAP WRENCHES • Unique design works on multiple sizes of fork caps FITS MODEL PART # HONDA CRF250R/X 04-09,12, CRF450R 02-08, CRF450X 05-09,12 (Showa 46mm and 50mm Twin-Chamber forks) TFCW4650 KAWASAKI KX250 05-07, KX250F 06-12 (Showa 46mm and 50mm Twin-Chamber forks) TFCW4650 KTM 125/200/250/450/525 SX 02-06, 300 XC/XC-W 06, 450/525/560 SMR 05-06, 300 EXC 03-04 (WP 48mm forks) 3805-0079 125/144/150/250/450/505 SX/SX-F 07-10, 150 XC 10, 250/350/450 SX-F 11-12, 505 XC-F 08-09 (WP 50mm dual-chamber forks) 3805-0048 SUZUKI RM125 96-07,RM250 96-08, RM-Z250 07-12, RM-Z450 05-12 (Showa 46mm and 50mm Twin-Chamber forks) TFCW4650 FORK CAP WRENCHES • PART #TFCW4650 features 46mm and 50mm box ends with the ability to remove compression valving on most models • PART #3805-0048 features a hex on one end and a pin spanner on the other to allow access to the inner chamber • Steel with an embossed Race Tech logo on handle DESCRIPTION PART # 46/50mm fork cap wrench 3805-0162 46/50MM FORK CAP WRENCH • For removing the caps on Showa MX forks • One end is 46mm, the other is 50mm • Can be used for removal of the compression stack • CNC-machined for precise fit and tolerance • 6061 aluminum material is non-marring on fork caps DESCRIPTION PART # 49mm, 8-point box wrench for dual-chamber closed-cartridge forks on late-model Honda and Yamaha 3805-0059 50mm, 6-point box wrench for WP 4860 MXMA dual-chamber closed-cartridge (WP USD 48mm) forks on late-model KTM 3805-0060 FORK CAP WRENCHES FOR DUAL-CHAMBER FORKS ON HONDA, KTM AND YAMAHA • For removing the fork cap (cartridge) on dual-chamber closed-cartridge forks • 12mm slot for holding the damper rod when removing the rebound bolt; this allows for the removal of the cartridge from the lower fork leg (Honda CRF250R 10 uses fork cap wrench PART #MP08-0236) • Made of billet 6061-T6 and anodized Motion Pro blue • Laser-engraved markings with Motion Pro logo • Original Motion Pro design 3805-0053 3805-0078 3805-0048 3805-0079 TFCW4650 3805-0059 3805-0060
RkJQdWJsaXNoZXIy NDI5NTY=