BOLD MAGENTA part numbers are new for 2023 PARTSCANADA.COM 2023 | TIRE & SERVICE V-TWIN TOOLS 432 PART # DESCRIPTION 147552 For 77-99 (except Twin Cam) CAM GEAR INSTALLER • Saves time and ensures accuracy time after time • Installs cam gear and repositions it on another camshaft exactly in same spot • Made in the U.S.A. PART # DESCRIPTION 3801-0311 For 17-22 M-Eight 3801-0144 For 99-17 Twin Cam and 84-99 Evolution Big Twin PART # DESCRIPTION 3801-0281 Repl. universal 1” dial indicator for PART #3801-0144 (0.001”) PINION SHAFT RUN OUT AND GEAR DRIVE BACKLASH TOOLS • Simplifies and speeds the process of checking crankshaft run out on M-Eight,Twin Cam® and EVO® model engines with the crankshaft installed • Mounts to the cam chest side of the engine case using the designated mounting holes of the tool combined with the handled thumbscrews and the case cam cover bolt holes • Gives quick and accurate readings of the engines crank pinion shaft run out, and makes for a great display to show and explain to customers the condition of their crankshaft • Made in the U.S.A. 3801-0144 3801-0311 PART # DESCRIPTION 3801-0099 For all 07-17 Twin Cam, 06 Dyna Glide 3801-0100 For 55-06 Big Twin (except 06 Dyna Glide) ENGINE ROTATORS • Rotates flywheel/piston assembly with engine still in frame or on a bench • The perfect tool when doing pushrod adjustments, building big-inch engines and checking operating clearances • Also can be used to keep the flywheel assembly from rotating when torquing the cam drive sprockets retention bolts • Built with a long socket design,making it easier to use without a 1/2” drive extension on your 1/2” driver • Made in the U.S.A. NOTE: Not for use with an air or electric impact wrench; this tool is only guaranteed for use with hand drivers. PART # DESCRIPTION DS-196169 For all 39-89 Big Twin and 57-76 XL PINION GEAR PULLER • Use to remove pinion gear • Made in the U.S.A. PART # DESCRIPTION DS-197048 For 54-99 Big Twin (except Twin Cam) PINION GEAR LOCK TOOL • Use to lock pinion gear when torquing the pinion gear nut • Simple to use; just align underneath gear and screw into case • With Big Twin tool, use PART #DS-196147 to tighten pinion nut • Made in the U.S.A. PART # DESCRIPTION DS-196047 For 69-10 Big Twin and Twin Cam MOTOR SPROCKET SHAFT SEAL INSTALL TOOL • Use to press oil seal over sprocket shaft into case • Use with tool PART #DS-196048 • Made in the U.S.A. PART # DESCRIPTION DS-196147 For 54-92 Big Twin PINION GEAR NUT SOCKET WRENCH • Use to secure or remove pinion gear nut to pinion shaft •1/2” drive • Made in the U.S.A. 3801-0099 3801-0100
RkJQdWJsaXNoZXIy NDI5NTY=