BOLD MAGENTA part numbers are new for 2023 PARTSCANADA.COM 2023 | TIRE & SERVICE V-TWIN TOOLS 442 PART # DESCRIPTION 1605-1270 Scorpion clutch hub puller SCORPION CLUTCH HUB PULLER • Anodized billet aluminum with a threaded steel insert for the puller bolt • Used on all Scorpion clutches except PART #DS-223468 • Made in the U.S.A. PART # DESCRIPTION DS-196158 For 36-90 Big Twin CLUTCH HUB PULLER • Used to remove wet and dry clutch hubs without removing clutch release rod • Made in the U.S.A. PART # DESCRIPTION DS-196061 For 36-E84 Big Twin models CLUTCH HUB PULLER • Remove the hub without removing the transmission end cover on Big Twin models • It may be used on L84-90 hubs by enlarging a few puller holes PART # DESCRIPTION 3802-0064 For all 85-20 Big Twins w/ mechanical clutch ULTIMATE CLUTCH ADJUSTING TOOL • Allows quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position • Includes the proper hex key Allen wrench, which conveniently stores in the tool handle • Made in the U.S.A. PART # DESCRIPTION 3803-0116 Clutch adjuster nut tool CLUTCH ADJUSTER NUT TOOL • Use this tool for adjusting clutches on all Harley-Davidson models with an 11/16” clutch adjuster lock nut • Deep socket allows tool to recess into clutch basket and can be driven with 11/16” combination wrench or adjustable wrench • Through-hole allows access with hex wrench to hold clutch adjuster screw while simultaneously tightening the adjuster lock nut • Compact design fits easily in a saddlebag or tool wrap PART # DESCRIPTION 3802-0063 For 85-06 5-speed Big Twin and aftermarket 6-speeds 5-SPEED MAIN CASE SEAL INSTALLER TOOL • Ensures correct alignment, seal protection and depth when installing the seal • Made in the U.S.A. PART # DESCRIPTION 3801-0175 For all 06-20 6-speed HD with Cruise Drive CRUISE DRIVE MAIN CASE SEAL INSTALLER • Developed to specifically work with H-D’s 6-speed transmission bearings • Driver style seal installer installs main seal to correct depth without applying any stress to bearings or seals, and won’t damage bearings, unlike a pushing or pull type of installer • Made in the U.S.A. PART # DESCRIPTION 3802-0052 5- and 6-speed countershaft bearing remover and installer tool 5- AND 6-SPEED COUNTERSHAFT BEARING TOOL • Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission shaft • Designed to install the bearing squarely and to the proper depth • Made in the U.S.A.
RkJQdWJsaXNoZXIy NDI5NTY=