BOLD MAGENTA part numbers are new for 2023 CHEMICALS & LUBRICANTS PARTSCANADA.COM TIRE & SERVICE | 2023 485 DESCRIPTION PART # 80W90, 946ml (1 quart), cs. KH-GL90 75W140, 946ml (1 quart), cs. KH-GL140 TECHNIPLATE® HYPOID TRANSMISSION LUBRICANT FOR BIG TWIN • Custom-formulated to meet or exceed warranty requirements for H-D Big Twin models • TechniPlate technology reduces friction, absorbs gear shock loading, lowers transmission temperatures • API Service GL-5 • 946ml (1 quart) bottles, 10 per case • Made in the U.S.A. DESCRIPTION PART # 946ml (1 quart), cs. 3603-0039 TECHNIPLATE® GEAR AND CHAIN CASE LUBRICANT FOR SPORTSTER 75W80 • Custom-formulated for H-D Sportster models • 100% synthetic transmission lubricant provides improved thermal stability; absorbs gear shock loading and gear galling • API Service GL-5 • 946ml (1 quart) bottles, 10 per case • Made in the U.S.A. DESCRIPTION PART # 946ml (1 quart), cs. KH-C80 TECHNIPLATE® PRIMARY CHAIN CASE LUBRICANT FOR BIG TWIN 80W90 • Meets or exceeds all warranty requirements for H-D Big Twin engines • Penetrates deep into chain rollers to loosen stiff links and extend chain and sprocket life • API Service GL-5 • 946ml (1 quart) bottles, 10 per case • Made in the U.S.A. DESCRIPTION PART # 946ml (1 quart), cs. KL506 FLEX DRIVE™ 30 SYNTHETIC GEAR LUBRICANT • A low-viscosity, extreme-pressure 75W/80 lubricant for use in motorcycle and ATV transmissions with a wet clutch • Engineered for enhanced thermal stability and to withstand the constant shearing stress in racing applications • TechniPlate® technology is an advanced synthetic lubricity system that contains precision lubricating and anti-shearing molecules that coat gears and clutch plates with a protective film to absorb shock and prevent metal-to-metal contact • API S.A.; intended for racing engines only • 946ml (1 quart) poly bottles, 10 per case DESCRIPTION PART # 946ml (1 quart), cs. 3606-0013 ATV/UTV FRONT/REAR END DIFFERENTIAL LUBRICANT 80W90 • Designed for off-road hi-performance ATV, Utility and Side by Sides • Developed for extreme loading stresses of off-road use • Provides extra gear protection in extreme shock loading conditions • Recommended for Arctic Cat®, Can-Am®, Honda®, Kawasaki®, Kymco®, Suzuki® and Yamaha® • 946ml (1 quart) bottles, 10 per case DESCRIPTION PART # 355ml (12 fl. oz.), cs. KL500 SYNTHETIC CHAIN CASE LUBE • Contains graphite molecules for reduced friction and surface drag • Provides maximum power and performance in extreme hot and cold conditions • Penetrates deep into chain rollers to loosen stiff links and extend chain and sprocket life • Eliminates rust and corrosion of chains and sprockets • 355ml (12 fl. oz.) bottle, 10 per case DESCRIPTION PART # 439g (15.5 oz.) net wt., cs. KL605 CHAIN LUBE • Contains ExtraTac™ Anti-Wear System for all street, off-road and racing applications • Cleans and protects conventional and rubber O-ring-type roller chains • Provides maximum lubrication and rust protection in all conditions • Nonfoaming formula is especially good in high-heat conditions and will not fly off at high rpm • Extends chain and sprocket life • Available in 439g (15.5 oz.) net wt. shop-size aerosol spray cans, 10 per case DESCRIPTION PART # 439g (15.5 oz.) net wt., ea. 3605-0010 KLR CHAIN LUBE • Sprays on smoothly and dries quickly to create a protective barrier that will not fling off • Repels moisture and dirt to keep chains and sprockets clean and protected from rust and corrosion with a waterproof shield • Specially formulated for conventional and O-ring-type roller chains to provide the maximum level of lubrication and wear protection • 439g (15.5 oz.) net wt. aerosol spray cans; sold each KH-GL140
RkJQdWJsaXNoZXIy NDI5NTY=