BOLD MAGENTA part numbers are new for 2024 PARTSCANADA.COM 2024 | ATV/UTV FUEL/AIR SYSTEMS 720 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # For 1/4” x 5/16” fuel line 877249 For 1/4” fuel line P12-035 DESCRIPTION PART # For 5/16” fuel line P12-036 For 3/16” fuel line P537 IN-LINE FUEL VALVES •For use with auxiliary fuel tank or other use requiring an in-line installation •Features double neoprene seals and O-rings •Smooth and positive operation •PART #s P537 and 877249 are not recommended for engines over 200cc •PART #s P12-035 and P12-036 are not recommended for engines over 300cc DESCRIPTION PART# Straight outlet 877242 DESCRIPTION PART# 90° 878123 FUEL VALVES 1/4” NPT X 1/4” BARB •Feature 1/4” NPT pipe thread on one end and a 1/4” barb on the other •Rugged steel construction with zinc plating •Viton® O-ring stands up to most commonly used fuels 877242 878123 P12-035 P12-036 P537 DESCRIPTION PART # Single, 1/4” P12-029 Single, 5/16” P12-030 Dual, 1/4” P12-037 Dual, 5/16” P12-038 DESCRIPTION PART # REPLACEMENT COMPONENTS Repl. O-ring for PART #P12-029 877283 Repl. O-ring for PART #P12-030 877284 FUEL LINE QUICK-DISCONNECT COUPLINGS •Single or dual shut-off valves •When connected fuel will flow and when disconnected fuel will not flow •Use dual shut-off for fuel tanks equipped with a crossover line • For fuel supply (fuel tank to carburetor), use the original quick-disconnect couplings with the single shut-off valve •Available for 1/4” and 5/16” ID fuel line •Capable of withstanding temperatures of -40°F to 180°F •These quick-disconnect fittings utilize Nitrile (Buna N) O-rings and may not be compatible with some race fuels •Made in the U.S.A. SIZE PART # 1/4” ID 0706-0035 SIZE PART # 5/16” ID 0706-0034 STRAIGHT-THROUGH FUEL LINE QUICK-DISCONNECT COUPLINGS •Straight through; no shut-off •Available for 1/4” and 5/16” ID fuel line •Capable of withstanding temperatures of -40°F-180°F •Made in the U.S.A. NOTE: Not for use with fuel-injected engines. P12-038 P12-037 P12-030 P12-029 0706-0034
RkJQdWJsaXNoZXIy NDI5NTY=