WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for 2024. SECTION 17 See OLDBOOK For Early Model Applications 1282 490 SERIES SHOCKS •True sport performance shocks •Feature a high-pressure monotube with deflective disc-damping technology, hand-threaded pre-load and rebound adjustment •Linear-rate spring allows riders to fine tune the damping and consistently withstand extreme temperature ranges and heavy loads •Engineered jounce bumper and cup also help smooth out and control bottoming •Made in the U.S.A. NOTE: All shocks are measured center-of-eyelet to center-of-eyelet. NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering. NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and provide somewhat slower steering. NOTE: For OEM shock lengths, see Quick Reference Guide in the back of the catalog. NOTE: Heavy Duty Applications are recommended for bikes that are operated at or near the manufacturer’s maximum load rating over 50% of the time. NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered without causing clearance issues, such as swingarm/axle to exhaust contact as well as chain/belt guard or tire contact. PART # DESCRIPTION FOR 99-23 FLT/F LHT/FLHR/FLTR/FLHX (EXCEPT H-D FL TRIKE) 1310-0904 Ultra Touring, standard 1310-0851 Ultra Touring, heavy-duty 1310-1590 Ultra Touring, super heavy-duty PART # DESCRIPTION FOR 99-23 FLT/FLHT/FLHR/FLTR/FLHX (EXCEPT H-D FL TRIKE) (CONT) 1310-1125 Ultra Low, standard 1310-1126 Ultra Low, heavy-duty 944 FST ULTRA TOURING/LOW SHOCKS •Unique Ultra Touring spring configuration provides the superb ride quality and suspension travel of a 13” shock but the custom lowered look of a 12” shock •Ultra Low Series shocks are designed to sit even lower; 2” lower than a stock Touring model •Built around Progressive Suspension’s Frequency Sensing Technology (FST) •944 FST Ultra Touring shocks are available in three configurations: Standard (Up to 250 lb.), Heavy-duty (250-350 lb.) and Super Heavy Duty (350+ lb.) •Allows the shocks to sense the frequency of a bump and automatically adjust damping for superior ride quality •Unique spring combination delivers a dropped ride height while being ridden, but also while the bike is on a side stand •This allows you to better manage your bike at intersections and when parking •Adjust spring pre-load by hand; no special tool needed •Progressive-rate mainsprings specifically designed for touring models •High-pressure gas-charged for consistent performance •Made in the U.S.A. NOTE: Heavy-duty applications are recommended for bikes operating at or near the manufacturer’s maximum load rating over 50% of the time. NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered without causing clearance issues, such as swingarm/axle to exhaust contact as well as chain/belt guard or tire contact. PART # DESCRIPTION FOR 06-23 FLT/FLHT/FLHR/FLTR/FLHX (EXCEPT H-D FL TRIKE) MODELS 1310-1536 13” FOR 06-17 FXD/FXDWG MODELS 1310-1531 13.5” FOR 99-05 FXD/FXDWG MODELS 1310-1612 12.5” PART # DESCRIPTION FOR 99-05 FXD/FXDWG MODELS (CONT) 1310-1613 13.5” FOR 04-21 XL MODELS (EXCEPT RH Sportster) 1310-1532 12” 1310-1533 13” 1310-1954 14” 1310-1955 15” STANDARD PART # DESCRIPTION SUG. RETAIL FOR 06-23 FLT/F LHT/FLHT/FLTR/FLHX (EXCEPT H-D FL TRIKE) 1310-1535 12” PART # DESCRIPTION SUG. RETAIL FOR 06-23 FLT/FLHT/FLHT/FLTR/FLHX (EXCEPT H-D FL TRIKE) (CONT) 1310-1537 13” HEAVY-DUTY 1310-1531 1310-0851 1310-1125
RkJQdWJsaXNoZXIy NDI5NTY=