WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for 2024. SECTION 7 510 See OLDBOOK For Early Model Applications DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 5-7 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PISTON KIT PART # REPL. RING SET PART # FOR 07-15 TWIN CAM 96 BORED TO 1746CC (106 CU. IN.) VM-RING PACKAGE (10.5:1 COMP.) 3.75” bore 0903-15941, 2 0912-0927 FOR 07-15 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (10.5:1 COMP.) 3.875” bore 0903-15651, 3 - 3.885” bore 0903-15661, 3 0912-0932 3.895” bore 0903-15671, 3 0912-0933 FOR 99-06 TWIN CAM 88 BORED TO 95 CU. IN. VM-RING PACKAGE (9.5:1 COMP.) 3.875” bore 0903-15581 - 3.885” bore 0903-15591 0912-0932 3.895” bore 0903-15601 0912-0933 DESCRIPTION PISTON KIT PART # REPL. RING SET PART # FOR 99-06 TWIN CAM 88 BORED TO 95 CU. IN. VM-RING PACKAGE (10.5:1 COMP.) 3.875” bore 0903-15611 - 3.885” bore 0903-15621 0912-0932 3.895” bore 0903-15631 0912-0933 FOR 99-06 TWIN CAM 88/95 BORED TO 97 CU. IN. VM-RING PACKAGE (10.5:1 COMP.) 3.93” bore 0903-15641 0912-0927 1 Requires aftermarket EFI tuner on fuel injected models. 2 Fit Twin Cooled cylinder heads. 3 Fit Screamin’ Eagle cylinder heads 11-15. TRACKER™ SERIES PISTON KITS •Forged piston crown with generous valve pockets for big valves and cams •Precision-fit rings selected for each application for ultimate sealing •Force-fed pin oiling provides enhanced lubrication of the piston pin •Pressure seal groove reduces ring lifting and power loss • ArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance •Value-packaged with two pistons, rings, piston pins and circlips •Made in the U.S.A. DESCRIPTION PISTON KIT REPL. RINGS REPL. WRIST PIN PART # FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (9:1 COMP. REVERSE DOME) ALSO FITS 99-06 TWIN CAM 88 WITH 43/8” STROKER CRANK Std. 0910-1996 0912-0285 W5752 .010” 0910-1998 0912-09325 W5752 FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (10.5:1 COMP., DOMED) ALSO FITS 99-06 TWIN CAM 88 WITH 43/8” STROKE CRANK Std. 0910-1999 0912-0285 W5752 Std. 0910-1999 0912-09315 W5752 .010” 0910-2001 0912-09325 W5752 FOR 99-17 TWIN CAM 88”/96”/103” BORED TO 1746CC (106 CU. IN.) WITH 4.375” STROKE CRANK (EXCEPT TWIN COOLED MODELS) VM-RING PACKAGE (10:1 COMP. FLAT TOP) Std. 0903-11701, 3, 4 0912-0145 - FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (10.5:1 COMP. REVERSE DOME) ALSO FITS 99-06 TWIN CAM 88 WITH 4.375” STROKER CRANK Std. 0910-52921, 3, 4 - W5752 .010” 0910-52931, 3, 4 - W5752 FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) X-RING PACKAGE (9:1 COMP. REVERSE DOME); ALSO FITS 99-06 TWIN CAM 88 WITH 4.375” STROKE CRANK Std. - - W5752 DESCRIPTION PISTON KIT REPL. RINGS REPL. WRIST PIN PART # FOR 07-17 TWIN CAM 96/103 BORED TO 1802CC (110 CU. IN.) X-RING PACKAGE (10.5:1 COMP. FLAT TOP) ALSO FITS 99-06 TWIN CAM 88 WITH 43/8” STROKER CRANK Std. 0910-0838 0912-0937 W5752 FOR 99-06 TWIN CAM 88 BORED TO 1550CC (95 CU. IN.) VM-RING PACKAGE (9:1 COMP.) Std. 0903-07911 - W5752 FOR 99-06 TWIN CAM 88 BORED TO 1550CC (95 CU. IN.) VM-RING PACKAGE (10.5:1 COMP.) NOTE: Requires Screamin’ Eagle module on fuel-injected models Std. 0903-07871 - W5752 .010” 0903-07891 - W5752 .020” 0903-07901 0912-09335 W5752 FOR 86-22 883 XL BORED TO 1200CC (REVERSE DOME) (9.5:1 COMP.) X-RING PACKAGE Std. K16552 3497X W5731 .010” K16562 - W5731 1 Includes top-end gasket kit. 2 08-22 models will require the use of 1200cc cylinders. 3 Fits 11-17 Screamin’ Eagle heads. 4 Kit includes ArmorX/AutoFit pistons. 5 VMF ring set with a 3mm oil ring. HIGH-PERFORMANCE FORGED PISTON KITS •Wiseco’s high-tech manufacturing ensures greater operating strength and lower expansion at high temperatures •Kit includes forged pistons with ArmorGlide™ coated skirts, rings, retainer clips, chrome piston pins •Twin Cam pistons have ArmorPlating which improves ring seal, eliminates ring micro-welding and improves the piston’s ability to defend against detonation damage •Piston kits are available with X-Ring package (.062 top ring, .062 compression ring and .158 oil ring) or VM-rings (1.2mm steel, positive twist, gas-nitrided top ring, 1.2mm cast iron, taper under-hook scraper ring and 2.0mm three-piece, flex-vent oil ring with steel chrome-faced rails); VM-rings, X-Rings and XC-Rings will not interchange 0903-1558 •103” kits require cylinder boring; 110” kit requires big-bore cylinders and case boring; recalibration required •Pistons are made in the U.S.A. NOTE: Replacement rings include rings for one piston only. WARNING: Wiseco pistons that use VM-rings can only be fitted with Wiseco VM-rings; Wiseco pistons that use X-rings can only be fitted with Wiseco XC-rings. 0910-1996
RkJQdWJsaXNoZXIy NDI5NTY=