WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 7 All part numbers in BLUE are new for 2024. 531 See OLDBOOK For Early Model Applications DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 5-7 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. FOR 05-17 TWIN CAM (5/16” AND 7MM STEM) PART # DESCRIPTION HEAD DIA. STEM DIA. LENGTH EXHAUST 425022 Chrome 1.610” .2755” 4.555” 4250141 Chrome 1.575” .2755” 4.540” INTAKE 4250072 Chrome 1.850” .2757” 4.440” 4250193 Black 1.900” .2757” 4.440” 4250203 Chrome 1.900” .2757” 4.440” 4250211 Chrome 1.810” .2757” 4.455” FOR 99-04 TWIN CAM (5/16” AND 7MM STEM) PART # DESCRIPTION HEAD DIA. STEM DIA. LENGTH EXHAUST 115268 Black 1.570” .3106” 4.525” 115258 Black 1.610” .3106” 4.525” INTAKE 115046 Black 1.900” .3108” 4.440” 115047 Black 1.940” .3108” 4.440” EXHAUST REPLACEMENT VALVES 115068 Black 1.570” .3108” 4.455” FOR 86-03 883-TO-1200 XL CONVERSIONS PART # DESCRIPTION HEAD DIA. STEM DIA. LENGTH EXHAUST 115049 Black 1.480” .3106” 4.640” INTAKE 115045 Black 1.720” .3108” 4.560” FOR AFTERMARKET/CUSTOM HEADS PART # DESCRIPTION HEAD DIA. STEM DIA. LENGTH FOR S&S HEADS 115269 Black; exhaust 1.610” .3106” 4.565” 115270 Black; intake 2.020” .3108” 4.510” 425010 Chrome; intake 2.060” .3108” 4.510” FOR JIM’S 110” HEADS 115116 Black; intake 2.100” .3108” 4.475” EXTREME-DUTY TULIP VALVES •Feature the highest flow level on the market •Manufactured from one-piece forged, racing-grade stainless steel •Each has bearing-quality hardened tip to prevent premature wear with high-lift applications •Also feature a 45° angle below the lock groove to facilitate the valve seal installation •7mm valves are offered with two different lock groove designs; the standard triple-groove or single-groove design •The stem is centerless-grinded to a micro-finish for longer life •Available in hard black or chrome finish •Replacement valves available in hard black; sold separately NOTE: 7mm stem valves are offered with the standard triple-groove design or with a head-lock style single groove. Single-groove valves are now used in most racing engines around the world. These single-groove valves must be used with AV&V single-groove spring kits (or AV&V single-groove retainer and lock kit when using the stock beehive springs). 1 7mm triple groove. 2 7mm triple groove (.040” oversize valve). 3 7mm triple groove (.090” oversize valve). PART # DESCRIPTION 0926-2723 For 05-17 Twin Cam 0926-2722 For 99-04 Twin Cam .585” VALVE SPRING KITS •Unique S&S designed dual-spring kit reduces the risk of valve float •For valve lift to .585” with 1.800”/130 lb. installed height, 325 lb. at max lift •Includes springs, top and bottom collars, keeper shims and valve seals •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0926-2972 For 17-23 M-Eight SIDEWINDER® .605” VALVE SPRING KIT •Include springs, keepers, top collars, bottom collars and seals •High-performance conical single wire valve springs •For valve lift to .605” with 1.535”/68 lb. installed height, 264 lb. at max lift •Max 6500 rpm •Made in the U.S.A. 0926-2722 PART # DESCRIPTION 0926-2069 For 05-17 88”/96”/103” Twin Cam PART # DESCRIPTION 0926-2056 For 99-04 Twin Cam, 86-03 XL SIDEWINDER® .650” VALVE SPRING KITS •Includes springs, upper and lower collars and keys •For valve lift to .650” with 1.860”/178 lb. installed height, 376 lb. at max lift •Max 6500 rpm •Made in the U.S.A. 0926-2056
RkJQdWJsaXNoZXIy NDI5NTY=