WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for 2024. SECTION 7 540 See OLDBOOK For Early Model Applications DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 5-7 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. PART # DESCRIPTION 0928-0051 For 99-17 Twin Cam models “TIME SAVER” CHROMOLY ADJUSTABLE PUSHRODS •.4375” diameter pushrods adjust from 8.750” to 10.750” on Twin Cam models •Speed up the installation of performance cams, rockers or other maintenance •Removal of rocker boxes is not required for installation •Adjusting end is a huge .354” – 40% larger than .250” ends •Chromoly construction •Sold in sets of four •Made in the U.S.A. PART # DESCRIPTION PUSHRODS 0928-0002 For 17-22 M-Eight, 99-17 Twin Cam, 91-22 XL (except RH Sportsters) PART # DESCRIPTION S&S O-RINGS 2402-0217 .562” ID x .068” OD, black, Viton® (2-pack); repl. OEM #26432-76A QUICKEE PUSHRODS •Allows quicker, easier installation without the removal of the rocker covers •.4375” diameter chromoly steel •Threaded adjuster screws into the pushrod until the threads disengage and the adjuster simply slides into the pushrod, making installation or removal a snap •Once the pushrod is installed and adjusted, the lock nut prevents the adjuster from moving •The ball ends of the pushrods are drilled so that oil can flow through the pushrod •Made in the U.S.A. PART # DESCRIPTION DS199241 For 99-17 Twin Cam PART # DESCRIPTION 93-5022 For 91-22 XL (except RH Sportsters), Buell ADJUSTABLE PUSHRODS •.4375” diameter chromoly steel for maximum strength •Rocker boxes must be removed for installation or removal •Sold in sets of four •Made in the U.S.A. 93-5022 NOTE: Twin Cam and XL applications will require aftermarket pushrod tubes that allow access to adjusters. NOTE: S&S Quickee pushrods are designed especially for use with Evolution and Twin Cam style hydraulic tappets. They are not compatible with most solid-style tappets. 0928-0002
RkJQdWJsaXNoZXIy NDI5NTY=