WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 10 All part numbers in BLUE are new for 2024. See OLDBOOK For Early Model Applications DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 5-7 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. 719 STARTER MOTORS •Nippondenso starters are assembled in the U.S.A. with heavy-duty components and tested with state-of-the-art equipment •Solenoid plunger, return damper and springs are replaced with stronger components •Clutch shaft and rollers are replaced with precision-ground and hardened parts for longer service life •All components are assembled with a special lube for starter roller clutch applications •CNC-machined billet mounting noses are held together with aerospace fasteners •After assembly, all starters go to a dyno test including hi-low voltage, stall torque, solenoid engagement, amperage draw, load test, maximum rpm and motor impulse wave form •Starters have a 4.4:1 gear reduction and produce 46% more cranking torque than the stock starter •Starters available in five kilowatt ratings (1.2, 1.4, 1.5, 1.6 and 2.0) PART # DESCRIPTION FOR 07-17 TWIN CAM, 06 DYNA GLIDE 2110-0588 Chrome 2110-0589 Black PART # DESCRIPTION FOR 99-06 TWIN CAM (EXCEPT 06 DYNA GLIDE) 2110-0580 Chrome 2110-0057 Black SLUGGER 1.8kW HIGH-TORQUE STARTER MOTORS •Starters are assembled in the U.S.A. with heavy-duty components and tested with state-of-the-art equipment •Starter offers superior windings, high-tolerance heavy-duty clutch and a thicker commutator that resists flying shorts •1.8kW output has the torque to start any monster motor with the least amount of amperage drain •Static balanced for smoother operation •Low-profile design will clear the electronic speedometer sensor for easy installation •Starters for late model 07-17 Twin Cam and 06 Dyna Glide are longer than stock but require no modifications to bike for a perfect fit NOTE: Starters on 99-06 FLT models will require use of spacer block PART #DS-196233. On FXST/FLST, Dyna and FXR models you must relocate oil lines and some wiring. FITS MODEL BLACK WRINKLE POLISHED/CHROME 1.5kW FOR TWIN CAM For 07-17 models, 06 Dyna Glide (except 17 Dressers) 2110-0250 2110-0249 1.4 kW FOR TWIN CAM (EXCEPT 06 DYNA GLIDE) For 99-06 models DS-196030 DS-195153 FITS MODEL BLACK WRINKLE POLISHED/CHROME 1.6 kW FOR TWIN CAM (EXCEPT 06 DYNA GLIDE) For 99-06 models DS-196190 DS-196186 1.2 kW FOR TWIN CAM (EXCEPT 06 DYNA GLIDE) For 99-06 models - 2110-0507 2.0 kW FOR TWIN CAM (EXCEPT 06 DYNA GLIDE) For 99-06 models DS-196037 DS-196034 •The 1.6 kW starter is designed for 96” or bigger motors with limited size batteries such as FXR, FXST and FXD models •The 1.2/1.4/1.5 kW starters are designed for OEM applications; use Terry battery cables and a battery with 300+ cranking amps like the Drag Specialties battery for best results •The 2.0 kW starter will start any monster motor (for best results, use with Terry battery cables and a battery with 300+ cold cranking amps like the Drag Specialties battery) •Made in the U.S.A. NOTE: 1.6 and 2.0 starters will require spacer block PART #DS-196233 when used on 99-06 FLT models. On Softail, Dyna and FXR models, you must relocate oil lines and some wiring. PART # DESCRIPTION DS-196233 For 99-06 FLT/FLHT/FLHR/FLHX/FLTR models OIL FILLER SPOUT SPACER BLOCK •Used to space the filler spout outward when using a longer aftermarket starter •Machined billet aluminum with a polished finish •11/2” thick •Made in the U.S.A. NOTE: Gaskets (PART #DS-174520 or 0934-1387) and longer bolts must be purchased separately. PART # DESCRIPTION 1120-0436 For 99-06 FLT OIL SPOUT SPACER KIT •Moves the oil spout 11/32” out to clear high-performance starters •Available in polished finish DS-196190 2110-0249 2110-0588 2110-0057
RkJQdWJsaXNoZXIy NDI5NTY=