WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for 2024. SECTION 12 934 See OLDBOOK For Early Model Applications CHROME GLOSS BLACK DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK CUSTOM BENDS (NOTCHED FOR ELECTRONIC THROTTLE CONTROL) (CONT) 0601-2837 - 10” bobber ape hangers for 99-23 models (except Springers, FLHT/FLHX) (dimpled and drilled) 9.47” 32.50” 7.37” 5.23” 0601-2851 0601-2852 10” bagger bobber ape hangers for 99-23 FLHT/FLHX models (dimpled and drilled) 9.61” 35.26” 12.00” 8.55” 0601-2839 0601-2840 12” bobber ape hangers for 99-23 models (except Springers, FLHT/FLHX) (dimpled and drilled) 13.47” 33.47” 7.37” 5.23” 0601-2853 - 12” bagger bobber ape hangers for 08-23 FLHT/FLHX models (dimpled and drilled) 12.61” 35.48” 12.00” 8.55” 0601-2841 0601-2842 14” bobber ape hangers for 99-23 models (except Springers, FLHT/FLHX) (dimpled and drilled) 13.48” 34.02” 7.37” 5.23” - 0601-2844 16” bobber ape hangers for 99-23 models (except Springers, FLHT/FLHX) (dimpled and drilled) 15.48” 34.78” 7.37” 5.23” 0601-1978 - 2+2 Wide Sweeper bars for 99-23 FLHR/99-13 FLTR (except FLHRXS) 11.21” 31.94” 8.5” 8.70” 0601-1980 0601-1981 2+2 Bagger Sweeper bars for 99-23 FLHT/FLHTC/FLHTCU/FLHX/FLHXS/FLHTK 11.24” 34.36” 12” 12” 0601-2858 - 2+2 Bagger Sweeper bars for 99-23 FLHT/FLHTC/FLHTCU/FLHX/FLHXS/FLHTK 13.53” 31.77” 12” 7.64” 0601-2857 - Narrow +2 Sweeper bars for 99-23 FLHT/FLHTC/FLHTCU/FLHX/FLHXS/FLHTK 12.71” 31.38” 12.00” 7.62” 0601-2648 - 2+2 Extended reach bars for 99-23 FLHT/FLHTC/FLHTCU/FLHX/FLHXS/FLHTK 13.86” 34.48” 12.00” 4.26” PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK CHROME OEM REPLACEMENT BENDS (DIMPLED) 0601-0812 For 00-07 FLST models; repl. OEM #56569-86 11.41” 31.32” 7.46” 5.22” 0601-0815 For 86-08 XL 883; repl. OEM #56082-83 4.64” 27.14” 4.71” 4.85” 1” HANDLEBARS (CONT) 0601-2837 0601-2853 0601-2857 0601-0812 0601-0815 PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK/ SWEEP HIGH BEND 0601-4145 Chrome 5 1/2” 30” 4 1/2” 20° 0601-4146 Black 5 1/2” 30” 4 1/2” 20° MID BEND 0601-4143 Chrome 4” 30” 4 1/2” 25° PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK/ SWEEP AGGRESSIVE MID BEND 0601-5664 Chrome 4” 31 1/2” 4 1/2” 5° 0601-5663 Black 4” 31 1/2” 4 1/2” 5° LOW BEND 0601-4141 Chrome 2 1/2” 30” 4 1/2” 22° 0601-4142 Black 2 1/2” 30” 4 1/2” 22° 1” HANDLEBARS •Drilled and slotted for internal wiring •Knurled for maximum clamp grip •Throttle-By-Wire keyholes allow late-style bike fitments (cable throttle models require Thrashin® handlebar plug (sold separately)) •Laser-etched Thrashin logo 0601-4141 0601-4145 PART # DESCRIPTION WIDTH END RISE CENTER WIDTH PULLBACK 0601-6238 Low bend 29.5” 2.5” 5.2” 1.75” 0601-6240 Mid bend 29.5” 3.5” 5.2” 2” 1” HANDLEBARS •Aggressive profile motocross-style bars •Chrome finish with a laser-etched SlyFox logo •Slotted for internal wiring •3 1/2” on-center knurling NOTE HANDLEBARS LISTED WILL NOT ACCEPT H-D OEM HEATED GRIPS (EXCEPT AS NOTED). •1” clamping area •Notched for Throttle-by-Wire •Accepts heated grips •Made in the U.S.A. 0601-6238 0601-6240 0601-1981
RkJQdWJsaXNoZXIy NDI5NTY=