BOLD MAGENTA part numbers are new for 2024 ALL-WEATHER GEAR PARTSCANADA.COM HELMET & APPAREL | 2024 SEE PAGE 4 FOR AN IMPORTANT SAFETY WARNING 549 GEN X-4 FOOT WARMERS • Lightweight EVA foam construction for warmth and comfort • Anti-slip material on bottom to keep foot warmers in place • Carbon fiber heating element covers almost the entire foot area for even heat distribution • Provide 14.5W of heat while drawing 1.2A per pair • Easy to install and remove for use in any boot • Trim to fit most boot sizes • For use with GEN X-4 heated chaps liner: no additional hook-ups are required; simply plug directly into the plugs hidden in leg ends • For use with GEN X-4 Warm Tek heated jacket liner or vest: purchase Y foot warmer harness (PART #607437) • For independent use: purchase Y foot warmer harness (PART #607437) and coax plug battery cord (PART #2130-0072) • See page 549-550 for GEN X-3 cords and controllers NOTE: The GEN X-4 line of heated clothing is NOT COMPATIBLE WITH GEN X-2 or GEN X-3 line of heated clothing (except for cords, controllers and battery packs).Any combined use will ruin the heated clothing. GEN X-4 HEATED SOCKS • Extremely comfortable,made with 85% polyester and 15% Lycra® • Provide heat on the top and bottom of toes • ZEPTO® fiber heat technology covers the entire foot area, providing uniform heat • Custom-fit design for left and right feet • Fit under tall or short boots • Engineered to go with Gen X-4 leg chaps (by connecting to hideaway plugs at the bottom of pant liners or leg chaps) or can be used by themselves (using Gears battery cord, PART #2130-0072 and Gears foot warmer Y cord, PART #607437) NOTE: GEN X-3 and GEN X-4 are fully compatible. GEN-X Y-CORD WITH TEMPERATURE CONTROLLER • Used to power the GEN X-3/GEN X-4 heated gloves or heated glove liners if you DON’T already have a GEN X-3/G EN X-4 heated vest or heated jacket • If powering heated gear directly from your vehicle, you’ll be connecting this cord to coax battery cord PART #2130-0072; sold separately • Built-in temperature controller allows you to choose from seven distinct heat levels or completely turn off the heat • Ensures your heated gloves or glove liners use only as much power as needed depending on the heat level • LED light indicates whether the heat is ON or OFF • Clip-on hook allows you to secure the temperature controller to your belt for easy access • Y-cord is long enough to pass underneath your motorcycle jacket easily and then through each sleeve • Wire that is intended to exit from the right arm sleeve is longer on the premise that connection to your battery occurs from the left side SAE TO USB ADAPTER • Compact, lightweight and ready to use anytime – plugs right into battery charging SAE plug • Charges most cell phones and smart phones, as well as other devices that require 1A or less charging power • Features an input voltage of 12V, output voltage of 5V and output current of 1A • Also features green LED function light DESCRIPTION PART # Foot-warmers 3431-0252 SIZE BLACK M 3431-0255 DESCRIPTION PART # Y-cord with temperature controller 2130-0364 DESCRIPTION PART # SAE to USB adapter 607586
RkJQdWJsaXNoZXIy NDI5NTY=