BOLD MAGENTA part numbers are new for 2024 HANDLEBARS & HAND CONTROLS PARTSCANADA .COM OFFROAD | 2024 121 1 1/2” BARBACK RISERS FOR BMW R1200/1250GSW/GSW ADVENTURE 13-20 •1 1/2” of total pullback (moves the bar approximately 1 1/4” up and 3/4” back from the OEM position) •Clear anodized finish •Include mounting hardware •Work with stock cables – cable rerouting instructions provided •Made in the U.S.A. DESCRIPTION PART # 1 1/2” barback risers 0602-0903 DESCRIPTION PART # Black anodized 0602-0904 DESCRIPTION PART # Gunmetal gray 0602-0905 DESCRIPTION PART # Machine finish 0602-0906 1 1/2” BARBACK RISERS FOR 1 1/8” HANDLEBARS •Move the handlebars 1 1/2” up and 1” back or forward from the OEM position (can be installed facing either direction) •Designed to work on any bike with a stock 1 1/8” Fatbar, parallel OEM bar clamps and open mounting area •Machined from 6061-T6 aircraft-grade billet aluminum • Engraved Rox logo for a clean and understated “factory” look •Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers • Machine finish, black anodized (matte finish) or gunmetal gray (matte finish) •These risers come with (2) step shims that allow the risers to mount to an OEM step down triple clamp, similar to the Honda Africa Twin •Include all mounting hardware and instructions •Made in the U.S.A. IMPORTANT: These risers cannot be installed on bikes with angled (eg.V-Shaped) OEM bar clamps. OEM Bar clamps must be parallel and sized for M8 bolts in order for these risers to mount properly. These risers will not work on the Triumph Tiger. 0602-0905 0602-0904 0602-0906 DESCRIPTION COLOR PART # 2” rise Natural aluminum 0602-0365 Black 0602-0440 3 1/2” rise Black 0602-0441 5” rise Black 0602-0442 ELITE PIVOTING RISERS FOR 7/8” OR 1 1/8” HANDLEBARS •Incredibly universal with a two-piece design that allows them to be clamped to any machine with 7/8” handlebar clamps •Allow you to clamp a stock 7/8” diameter handlebar, or you can remove the 7/8” reducers and clamp a 1 1/8” aluminum handlebar; reducers lock into risers to ensure no slippage between components, and serrated teeth provide maximum gripping power on the handlebar •Risers are held by the original 7/8” clamps to reclamp the handlebars 2”, 3 1/2” or 5” higher (depending on size purchased) with pivoting fore and aft adjustment •Rox outboard positioning also makes them incredibly durable •Available in natural aluminum or black finish •Made in the U.S.A. NOTE: Longer cables may be required when installing handlebar risers. 0602-0441 0602-0365
RkJQdWJsaXNoZXIy NDI5NTY=