BOLD MAGENTA part numbers are new for 2024 EXHAUST PARTSCANADA .COM OFFROAD | 2024 47 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # 250-gram bag M702 500-gram bag 1860-0060 DESCRIPTION PART # 750-gram bag 1860-0575 COMPETITION MUFFLER PACKING • The same low-weight, high-quality packing material used in our repack cartridges • Lighter, quieter, and longer lasting than fiberglass mat packing •Resists breakdown up to 1100°F •250g bag works for most 2-stroke applications •500g bag repacks most 4-stroke mufflers • Available in 250, 500 and 750 gram bulk packs •Made in the U.S.A. M702 DESCRIPTION PART # Fiberglass muffler packing M701 FIBERGLASS MUFFLER PACKING •Repack blown-out silencers for more power and a quieter ride •Long filament fiberglass made especially for muffler packing • Measures 10.5” x 16”, more than enough to repack virtually any 2-stroke silencer •Resists breakdown up to 1200°F •Made in the U.S.A. DESCRIPTION PART # 15” 1860-0573 DESCRIPTION PART # 19” 1860-0574 MUFFLER PACKING PILLOWS •The latest in muffler packing technology •Available with Competition Muffler Packing • Universal, easy-to-install design • Pillow can be trimmed to length to fit off-road muffler up to 20” long •Lasts 3-5 times longer than traditional packing and extends service to 30-40 engine hours •Competition Pillows resist breakdown up to 1100°F •Comes with cap stuffer to fill packable end-caps •Adhesive closure flap used to eliminate the need to wrap the packing with tape or wire • Available in 15” and 19” •Made in the U.S.A. DESCRIPTION PART # Stainless repack kit 1860-0037 UNIVERSAL STAINLESS REPACK KIT •Louder exhaust does not mean more horsepower •Blown-out packing causes exhaust turbulence and increased back pressure, which reduces horsepower • Repack your silencer with this pro-quality, three-layer packing system and restore the power you’ve blown out •Also great for getting in compliance with new sound laws •Kit contains 1/4” thick 60” x 20” glass mat, 7” x 20” stainless wool, 8” x 20” stainless mesh, twelve 3/16” rivets, and full instructions •Made in the U.S.A. DESCRIPTION PART # 15” muffler core sleeve 1860-0473 DESCRIPTION PART # 19” muffler core sleeve 1860-0474 MUFFLER CORE SLEEVES •Two-layer wrap consists of 304 stainless wire cloth and a very durable, high-temp stainless steel wool •Keeps engine performance and sound levels more consistent compared to packing fiber directly around the core •Can be easily trimmed with scissors for shorter mufflers • Designed to fit cores from 1.75” to 2.125” •Stainless steel wire is included to secure the wrap in place around the core •Increases intervals between re-packs by 3-5 times •Works great with the Moose Racing Packing Pillow •Made in the U.S.A. 1860-0474 DESCRIPTION PART # 2” x 36” strip 1861-0153 DESCRIPTION PART # 18” x 18” sheet M30051 HEAT SHIELDS •Aluminized heat barrier with adhesive backing •Foil-coated fiberglass cloth adheres to body panels to protect plastic or fiberglass from engine or exhaust heat • One 18” x 18” sheet provides 324 square inches of superior heat protection • Also available in a long narrow strip sized 2” x 36” •Made in the U.S.A. M30051 1861-0153
RkJQdWJsaXNoZXIy NDI5NTY=