BOLD MAGENTA part numbers are new for 2024 TRACTION PRODUCTS PARTSCANADA.COM SNOW | 2024 271 DESCRIPTION TOTAL LENGTH USAGE (MAY VARY DEPENDING ON LUG HEIGHT OF TIRE) PKG. QTY. PART # Grip-It™ 13mm/0.512” Motorcycle, mini loader, bicycle 100 1250-0423 Attack™-18 20mm/0.787” ATV, UTV, motorcycle, forklift, mini loader, tractor 100 1250-0641 Attack™-25 25mm/0.984” ATV, UTV, motorcycle 100 1250-0428 TWIST TIRE SCREWS • Twist Gripper™ screws provide traction for heavy equipment and groomers • High-grade carbon steel hex screws with a carbide insert and specially designed threads • Zinc electroplated to extend the life of the screw with an anti-corrosive layer to stop oxidation • All have extra-coarse threads giving Woody’s® Twist tire screws holding strength to stay in place season after season, and ease removal • The carbide tip increases traction on many surfaces: snow, ice,mud, slippery rocks, wood, hard-packed dirt and gravel, and hills • Also provide added traction for rounding corners and for surprises under the water • Packaged in a clearly marked, sturdy plastic container for easy shipping and display 1250-0423 1250-0428 DESCRIPTION PART # Track marker TRAK-MARK TRACK MARKER • Use white marker to indicate stud placement • For use with Woody’s® studding templates • Check pattern before drilling holes DESCRIPTION STUD SIZE PART # For square backer plates 5/16” SPI-TOOL-5 INDEXING TOOL FOR SUPPORT PLATES • Fits on a standard 3/8” drive ratchet • Use on installed square support plates to ensure edges run parallel to the track edge ANGLE PART # 30° TOOL-SHARP3 45° TOOL-SHARP4 60° TOOL-SHARP6 STEEL STUD SHARPENING TOOLS • Easy to use – just put the tool into a 3/8” drill chuck and sharpen studs while they’re on the sled • Available in 30°, 45° and 60° angles TOOL-SHARP3 DESCRIPTION PART # Stud hex tool 3820-0007 Repl. hex bits (2-pk.) 3820-0008 STUD HEX TOOL • Use to install and remove push-through studs • Handle made from premium aluminum • Tool includes an extra hex bit • Replacement hex package contains two hex bits (sold separately) DESCRIPTION PART # Shallow socket tool SCW-4505 SHALLOW SOCKET TOOL • For driving locknuts down on push-through studs • Provides the torque to tighten without touching the surface of the support plate • Will not scuff finish of colored support plates • Available in 5/16” size 3820-0007 FITS MODEL HEIGHT/LENGTH PART # POLARIS Multiple models .75” x 51” 631608 SKI-DOO Multiple models 1” x 50” 631613 FITS MODEL HEIGHT/LENGTH PART # YAMAHA VMAX 500/600 XTC 97,VX 600/700 SX 97 1” x 50” 631611 Multiple models .75” x 51” 631608 TUNNEL WEAR STRIP/ HEAT EXCHANGE PROTECTOR • PART #631608 is drilled the same as Polaris OEM #2871544; fits multiple Polaris and Yamaha applications • PART #631611 is direct replacement for Yamaha OEM #SMA-8CV-92900 631611 631613 • PART #631613 is a taller version and provides more protection than the OEM wear strip
RkJQdWJsaXNoZXIy NDI5NTY=