BOLD MAGENTA part numbers are new for 2024 PARTSCANADA.COM 2024 | STREET ENGINE 1034 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # Hose clamp set 2404-1050 HOSE CLAMP SET FOR POLARIS SLINGSHOT 15-19 •Clamp down engine hoses while adding a dash of color to your engine •Easy install mounting and holding coolant lines and wire looms •Does not require disconnecting coolant hoses for installation •No drilling required; utilizes pre-existing bolt holes •Aluminum construction DESCRIPTION PART # Cooling system Stepless clamp kit 2402-0110 Stepless clamps, 17.0-21.0mm (10-pk.) 2401-0548 Stepless clamps, 20.9-24.1mm (10-pk.) 2401-0549 Stepless clamps, 23.9-27.1mm (10-pk.) 2401-0550 Stepless clamps, 26.9-30.1mm (10-pk.) 2401-0551 DESCRIPTION PART # Stepless clamps, 29.9-33.1mm (10-pk.) 2401-0552 Stepless clamps, 32.9-36.1mm (10-pk.) 2401-0553 Stepless clamps, 36.4-39.6mm (5-pk.) 2401-0554 Stepless clamps, 40.8-44.0mm (5-pk.) 2401-0555 Stepless clamps, 7.8-9.5mm (10-pk.) 2401-0557 COOLING SYSTEM STEPLESS® CLAMP KIT •85-piece Stepless® clamp kit with an assortment of commonly used clamp sizes for cooling systems •Stepless clamps provide secure 360° clamping with no gaps •Specially formed edges reduce risk of damage to hose and hose barb •Narrow 9mm band provides concentrated seal compression •Tampering is visible •Durable partitioned plastic box with snap lid keeps your stock of clamps organized and ready to use •Please follow factory service manual recommendations for selecting correct clamp size for each engine •Clamps require use of Motion Pro pincer tool PART #s 3801-0034 or 3801-0182 (sold separately) •Individual clamp sizes available separately for restocking 2402-0110 DESCRIPTION PART # Coolant recovery tank 1902-0893 275CC COOLANT RECOVERY TANK •Prevents loss of coolant due to overheating •Works on most water-cooled motorcycles, snowmobiles, and ATVs •Designed for hot weather and/or high-altitude riding conditions • Compact, versatile, high-density polyethylene bottle •Built-in mounting holes provide multiple mounting options •Bottle cap is constructed from chemical-resistant rubber for durability and easy installation/removal • Includes 275cc bottle, hose, clamps, mounting ties and instructions DESCRIPTION PART # 23 psi (red) 1903-0011 30 psi (blue) 1903-0013 26 psi (black) 1903-0029 HIGH-PRESSURE RACING RADIATOR CAPS • Engineered to increase pressure in cooling system, which then increases coolant boiling point; helps prevent boil over •Chrome cap with grooved edges for grip; pressure rating printed on cap in metric and standard psi •Color-coded seals: Red = 1.6K (23 psi), Green = 1.8K (26 psi), Blue = 2.1K (30 psi) •High-temperature silicone seals •Includes high-temperature metal film warning decal and adhesive • For competition use on most Hondas, Kawasakis, Suzukis and Yamahas DESCRIPTION PART # Standard radiator cap, zinc-plated (gold) 1903-0008 Standard radiator cap, black 1903-0009 Grip-style radiator cap, chrome 1903-0010 STANDARD-PRESSURE RADIATOR CAPS •High-temperature silicone seals •Stock-pressure rating of 16 psi (1.1 bar) •PART #s 1903-0008 and 1903-0009 are stamped with metric pressure rating of 1.1 bar •PART #1903-0010 includes high-temperature metal film warning decal and adhesive, and features grooved edges for grip; pressure rating printed on cap in standard 16 psi and metric 1.1K • Universal fit for most Hondas, Kawasakis, Suzukis and Yamahas 1903-0011 1903-0029 1903-0013 1903-0008 1903-0009 1903-0010
RkJQdWJsaXNoZXIy NDI5NTY=