BOLD MAGENTA part numbers are new for 2024 LIGHTING PARTSCANADA.COM STREET | 2024 601 DESCRIPTION PART # Black 2020-2113 Chrome 2020-2114 ROCKET BULLET RUN/TURN/BRAKE SIGNALS •Features six bright SMD LEDs in the center of the lens and consists of COBs (Chip On Board) on the outer ring •Built with aluminum housings and smoked lenses •For rear use • Dimensions: A Diameter: 1.77”, B Width: 2.56”, C Depth: 2.52”, Stem Length: .94” •Mounting Bolt: M10 x 30mm • E-approved •Sold in pairs DESCRIPTION PART # LED daytime running light 2001-2569 LED DAYTIME RUNNING LIGHT • Packs four powerful LEDs into a round, black aluminum housing •DRLs help provide further awareness to be better seen by other motorists •Includes mounting bracket •Dimensions: diameter: 2.81”; depth: 1.87”; power consumption at 12.5 volts, 2.5 watt; light value at 12 volts: 150 lumen •Universal fitment for 12V systems •Sold each DESCRIPTION PART # Akron-X LED run/turn/brake signals 2020-2110 AKRON-X LED RUN/TURN/BRAKE SIGNALS •Provide a timeless look and state-of-the-art technology •Flowing shapes and perfect transitions characterize the appearance of the AKRON-X •Two powerful SMD LEDs show their best side with these shapely signals •Smoked lenses •For rear use •Diameter: 1.57” •Depth: 1.77” • Thread: M8, length .78” •Stalk approx.: .59” • E-approved •Sold in pairs DESCRIPTION PART # Rocket bullet run/turn/brake signals 2020-2077 ROCKET BULLET RUN/TURN/BRAKE SIGNALS •Features six bright SMD LEDs in the center of the lens and consists of COBs (Chip On Board) on the outer ring •Built with aluminum housings and smoked lenses •For rear use • Dimensions: Diameter: 1.77”, width: 2.56”, depth: 2.52”, stem length: 0.94” •Mounting bolt: M10 x 30mm • E-approved •Sold in pairs DESCRIPTION PART # Rocket run/turn/brake signals 2020-2112 ROCKET RUN/TURN/BRAKE SIGNALS •Built for custom mounting; choose between recessed or surface mounting •Constructed with a black aluminum ring and smoked lens •Size ultra-bright SMD LEDs installed in the center •The outer ring consists of COBs (Chip On Board) •This combination comes with a black anodized aluminum ring that fits over the base body •For rear use • Dimensions: A Depth: .55”, B Diameter: 1.77” (with aluminum ring), Depth: .39”, Diameter: 1.57” (without aluminum ring) •Mounting bolt: M8 x 18mm • E-approved •Sold in pairs DESCRIPTION PART # Rocket LED turn signals 2020-2075 ROCKET LED TURN SIGNALS •Make mounting easy with their small design and a single 8mm mounting stud •Complete with a black aluminum ring and smoked lenses •Six very bright amber SMD LEDs are installed in the center, which allows an extremely small design •The outer ring consists of the new COB technology (Chip On Board) •Thanks to the new LED chip embedding for high-power LEDs, a very high luminance can be achieved with currently the best possible efficiency and service life •This combination comes with a black anodized aluminum ring that fits over the base body •For use as front or rear turn signal • Dimensions: thickness including aluminum ring .71” (18mm), thickness without ring .59” (15mm), diameter including aluminum ring 1.77” (45mm), diameter without ring 1.69” (43 mm), mounting bolt: M8 x .71” (18mm) •Universal fitment for 12V systems • E-approved •Sold in pairs NOTE: The combination can be installed flat without an aluminum ring so that only the lens is visible.A 40mm hole must be drilled for this purpose.Alternatively, the combination with the aluminum ring can be mounted on a retaining plate on the vehicle. 2020-2114 2020-2113
RkJQdWJsaXNoZXIy NDI5NTY=