BOLD MAGENTA part numbers are new for 2024 PARTSCANADA.COM 2024 | STREET LIGHTING 606 DESCRIPTION PART # Silver 2020-2072 BRONX LED TURN SIGNALS •CNC-milled from aluminum and finished in black or silver •Packed with the latest in LED technology, these signals are at the top of their class •For use as front or rear turn signals • Dimensions: width: 1.77”, height 47”, depth .7”, mounting studs: M8 x 15mm •Universal fitment for 12V systems • E-approved •Sold in pairs DESCRIPTION PART # Conero run/turn/brake signals 2020-2102 CONERO RUN/TURN/ BRAKE SIGNALS •Offers high luminosity thanks to state-of-the-art COB technology (Chip On Board) •The new LED chip embedding for high-power LEDs achieves a very high luminance with currently the best possible efficiency and service life • In addition, higher light values can be achieved than with conventional LEDs despite smoked lenses • The black, cylindrical aluminum housing and the polished bevels distinguish the noble, stylish design of this model •For rear use • Dimensions: signal diameter: 1.77”, depth: .59”; Thread bolt: M8 •Universal fitment for 12V systems • E-approved •Sold in pairs DESCRIPTION PART # Black/smoke lenses 2020-2073 DESCRIPTION PART # Silver/smoke lenses 2020-2074 LITTLE BRONX DRL/TURN SIGNALS •Designed to attract attention thanks to the extremely bright SMD technology •The CNC-milled aluminum body is lightly sandblasted for a fine texture and finished in black or silver •Lighting features a unique two-in-one white DRL and amber turn signal •For front use • Dimensions: width: 1.02”, height: .47”, depth: .59” •Threads: M8 x 16mm •Universal fitment for 12V systems •Sold in pairs NOTE: The Highsider PL Control Box CB2 PART #2050-0472 switches the position light off during the flashing process and goes on again after the flashing process (with a small delay). DESCRIPTION PART # Stripe sequential turn signal modules 2020-2055 STRIPE SEQUENTIAL TURN SIGNAL MODULES •Shows off the latest in sequential turn signal styling •The modern turn signal module with a smoked lens and built-in sequential lighting system is suitable for bolt-on or build-in mounting •When the individual LEDs light up one after the other when flashing, an optical wiping effect is created •The trendy sequence indicator with robust plastic housing and tinted glass is a real eye-catcher in road traffic •For use as front or rear turn signal • Dimensions: width: 2.11” (53.5mm), height: .28” (7mm), depth: .71” (18mm) •Universal fitment for 12V systems • E-approved •Sold in pairs DESCRIPTION PART # Flight bar end turn signals 0634-0588 FLIGHT BAR END TURN SIGNALS •Designed with a slim and sporty aluminum housing and a seamlessly inserted smoked lens with amber LEDs • Install the Flight Bar End Turn Signal by themselves or pair them with bar end mirrors •Includes a universal clamping system with a hollow bolt to internally wire the signal wires •Modern amber SMD LEDs provide excellent luminosity and added visibility •Compatible with most 7/8” and 1” handlebars • Dimensions: width: .84”, diameter: 1.35” •Universal fitment for 12V systems •E-approved for use as a front turn signal •Sold in pairs DESCRIPTION PART # Stripe LED turn signals with mirror mount 2020-2056 STRIPE LED TURN SIGNALS WITH MIRROR MOUNT •Powered by LED technology and paired with a black anodized aluminum housing and brackets to mount below factory mirror stems •For front use with mirror mounts • Measures: 2.26”W x .44” H (1.3” with bracket) x .93” D •Sold in pairs with mirror mount brackets •Universal fitment for 12V systems 2020-2073 2020-2074
RkJQdWJsaXNoZXIy NDI5NTY=