BOLD MAGENTA part numbers are new for 2024 LIGHTING PARTSCANADA.COM STREET | 2024 641 DESCRIPTION PART # CBW1 can-bus resistor 2050-0468 CBW1 CAN-BUS RESISTOR •Compatible with most vehicles equipped with a CAN-BUS system •Provides the required electrical load to the electrical system • When the DIP switches are set correctly, the CBW1 will eliminate an error message and fast flashing caused by aftermarket LED turn signals •Up to 2 channels can be operated (front and rear or left and right) • If all four turn signals are replaced, 2 x CBW1 are required •Requirements for use of the CBW1 on the vehicle: 1) LED indicators were factory installed on the vehicle, 2) The vehicle has a CAN-BUS system DESCRIPTION PART # PL control box CB2 2050-0472 PL CONTROL BOX CB2 •Compact control module allows you to turn off a position light while the turn signal is activated •Makes installing 2-in-1 lights easy •Built-in reverse polarity protection •Once installed the position light and turn signal circuits are separated •Compatible with all dual function Highsider signals • Measures .43”W x .68” L •Sold in pairs Note: Not compatible with headlights with position light. DESCRIPTION PART # Universal LED flasher relay 2050-0476 UNIVERSAL LED FLASHER RELAY • Shin Yo Flasher Relay SY-03, 12V0, 5-30W • Measures: .29” W x .59” L •Cable length: 2 x 3.7” •Sold each DESCRIPTION PART # Universal nano flasher relay 2050-0471 UNIVERSAL NANO FLASHER RELAY •The Highsider PW-Nano is an extremely small, load-independent digital flasher unit •Ideal for LED flasher conversions or incandescent 10W to 21W turn signal bulbs •The relay delivers an absolute constant flashing frequency and fits in almost any handlebar or tubing •Sold each DESCRIPTION PART # Universal 3-pin flasher relay 2050-0475 UNIVERSAL 3-PIN LED FLASHER RELAY •Eliminate fast flashing caused by incandescent to LED light conversions • This Shin Yo universal 3-pin flasher relay is complete with an adjustable flasher frequency •Universal for all 12V systems •Includes universal wiring harness •Sold each DESCRIPTION PART # Two-channel electronic relay 2050-0473 TWO-CHANNEL ELECTRONIC RELAY • With two channels, this relay can control two independent circuits and provide unwanted damage to push buttons due to high current •Compatible with 6V to 14V systems with a max load of 40W •Converts pulsing ground turn signal inputs into positive signals, which is useful for Indian Motorcycles • Measures: .66”W x .37” D x .66” H •Sold each DESCRIPTION PART # Universal digital flasher relay 2050-0470 UNIVERSAL DIGITAL FLASHER RELAY, 2 WIRE •The Highsider BR10 Digital Flasher Relay is a compact, load-independent digital flasher unit •Ideal for LED flasher conversions or incandescent 10W to 21W turn signal bulbs • The BR10 is waterproof, vibration-proof, wear-free and overload-proof •Sold each
RkJQdWJsaXNoZXIy NDI5NTY=