BOLD MAGENTA part numbers are new for 2024 EXHAUST PARTSCANADA.COM STREET | 2024 77 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # EMIS* Exhaust end cap 1812-0150 3 SUPERTRAPP EXHAUST END CAP •Allows you to open up your exhaust for straight-through flow by simply turning a screw •Slight power gains when used on modified motors • 4” diameter •Sold each •Made in the U.S.A. DESCRIPTION PART # EMIS* For 1 1/2” – 1 3/4” ID exhaust pipes 1861-0400 3 TORQUE CONES •Generate correct levels of backpressure for increased horsepower •Fully radiused edges for improved engine response, especially low-end torque •For use with stock or aftermarket exhaust systems •Sold in pairs •Made in the U.S.A. DESCRIPTION PART # 2”W x 25’L 1861-0318 HIGH-TEMPERATURE EXHAUST WRAP KIT •Wraps will increase power and reduce radiated exhaust heat • Kit includes 2” x 25’ top-quality high-temperature wrap and four stainless steel tie wraps for that finishing touch •Wraps can withstand up to 2,000°F (1,093°C) •Available in black DESCRIPTION PART # Tan M30050 Black 1861-0341 EXHAUST WRAPS •Fiberglass cloth wrap available in black and tan •Stable at temperatures up to 2000°F •Insulates exhaust header pipes to protect you or your machine from intense heat •Generous size roll is enough to wrap one long header or critical areas on multiple exhausts; measures 2” x 50’ •Made in the U.S.A. DESCRIPTION PART # Exhaust tape M703 EXHAUST TAPE •High-temperature exhaust sealing tape with adhesive •Designed to seal exhaust joints on the muffler when repacking or if needed where the muffler attaches to the head pipe •Max operating temperature is 525°F •Package includes two strips of tape; each measures .020” thick, 1”W and 8” L •Made in the U.S.A. DESCRIPTION PART # Exhaust header wrap kit 1861-0622 HEADER WRAP KIT • Features laser-cut Vance & Hines wrap clamps, black header wrap tape and locking stainless steel ties • Black, fiberglass composite wrap tape locks in heat and reduces the radiant heat by 50% •Kit will wrap two motorcycle headers thoroughly • Includes 2” x 25’ roll of black wrap tape, two Vance & Hines Wrap Clamps and six locking stainless steel ties •Made in the U.S.A. IMPORTANT NOTICE: Use of this Vance & Hines Header Wrap Kit (PART #1861-0622) may void all warranties of the exhaust system that this kit is applied to. Header Wrap functions to insulate heat generated by exhaust gases flowing through the headpipe, thereby raising the headpipe temperature beyond its intended operating temperature. Using heat wrap may compromise the integrity of the headpipe material, and may ultimately lead to cracks in the headpipe and will not be covered under warranty. Use of header wrap on an exhaust system is a modification to, and not a normal use of, an exhaust system.This notice is intended to inform the buyer to consider this possibility before using this product. 1861-0341 M30050
RkJQdWJsaXNoZXIy NDI5NTY=