BOLD MAGENTA part numbers are new for 2024 PARTSCANADA.COM 2024 | TIRE & SERVICE TUBES & ACCESSORIES 260 INNER TUBE FAILURE COULD RESULT IN DEATH OR SERIOUS INJURY. ALLOW ONLY TRAINED PERSONNEL TO INSTALL INNER TUBES. WARNING TIRE SIZE RIM SIZES PART # FRONT 80/100-21 1.85 BM-01 90/90-21 1.85 BM-01 90/100-21 1.85 0350-00611 REAR 120/90-18 2.50-2.152 BM-53 TIRE SIZE RIM SIZES PART # REAR (CONT) 140/80-18 (enduro) 2.50-2.152 BM-54 140/90-18 (desert race) 2.50-2.152 BM-55 100/90-19 2.15-1.852 BM-51 110/90-19 2.50-2.152 BM-52 1 For StarCross HP4 tires only. 2 Fitting allowed on the listed narrower rim width, but difficult. BIB MOUSSE® • Made from a multi-cellular butyl material, Bib Mousse® replaces conventional tubes, providing a pressure equivalent of approximately 13 psi • Specifically designed for off-road competition use, at speeds up to 80 mph (130 km/h) – above this speed, heat buildup can lead to rapid destruction of the Bib Mousse©, resulting in serious injury to the rider – under no circumstances should Bib Mousse® be fitted to motorcycles for on-road use • Bib Mousse® may be used only with Michelin off-road tires, including StarCross HP4, StarCross MS3, StarCross MH3, S12 XC, M12 XC and Desert Race – because Bib Mousse® is shaped for a perfect fit inside these Michelin tires (see sizing chart below); use of Bib Mousse® with other brands of tires can lead to handling instability and possible destruction of the Bib Mousse® • Each Bib Mousse® includes a tube of Bib Mousse® Mounting Gel; installer must be sure to follow installation instructions supplied with the product DESCRIPTION PART # Bib Mousse® Mounting Gel 3607-0015 BIB MOUSSE® MOUNTING GEL • Use when installing or reinstalling a Michelin Bib Mousse® • 50g tube • Sold in 12-pack FITS TIRE SIZE STEM TYPE TUBE TYPE PART # 100/100 to 120/100-18 TR-4 Heavy-duty 0390-0001 100/100 to 120/100-18 TR-4 Extra heavy-duty 0390-0002 100/90 to 120/90-19 TR-4 Heavy-duty 0390-0003 FITS TIRE SIZE STEM TYPE TUBE TYPE PART # 100/90 to 120/90-19 TR-4 Extra heavy-duty 0390-0004 80/100-21 TR-4 Ultra heavy-duty 0350-0539 TUBES HEAVY-DUTY, EXTRA HEAVY-DUTY AND ULTRA HEAVY-DUTY • Made specifically for MX or off-road use • Heavy-duty tubes are 1.5mm thick to be more durable than standard tubes • Extra heavy-duty tubes are 2.5mm thick to offer superb durability in extreme conditions; nearly twice as strong as heavy-duty tube • Both use synthetic rubber construction that offers excellent strength and will not allow air to leak like natural rubber • For Valve Stem Types, see page 256 SIZE PART # FRONT 90/90 – 80/100-21 M800-10 SIZE PART # REAR 4.50 - 5.10-17 0350-0060 SIZE PART # REAR (CONT) 100/100 – 120/100-18 M800-20 100/90 – 110/90-19 M800-30 HEAVY-DUTY INNER TUBES • Heavy-duty tubes made specifically for off-road and motocross • European made, these are the sturdiest, highest-quality tubes on the market • 3mm thick natural rubber construction helps resist pinch flats • TR-4 valve stems; for Valve Stem Types, see page 256
RkJQdWJsaXNoZXIy NDI5NTY=