BOLD MAGENTA part numbers are new for 2024 PARTSCANADA.COM 2024 | TIRE & SERVICE SERVICE & MAINTENANCE TOOLS 314 DESCRIPTION PART # Flywheel puller 3801-0429 FLYWHEEL PULLER FOR MOST 13-24 POLARIS UTV MODELS • Removes the stubborn flywheel on most Polaris UTVs • Made in the U.S.A. DESCRIPTION PART # Pro seal puller 3850-0508 PRO SEAL PULLER • Makes it easy for you to remove oil and water seals • Includes three interchangeable puller tips to accommodate a wide range of seal sizes • Wide tip footprint aids easy seal removal • Knurled handle provides secure grip and leverage • Billet aluminum construction reduces risk of damage to engine cases • Durable anodized finish with laser-etched logos DESCRIPTION PART # Rotor and sprocket holder 3808-0003 ROTOR AND SPROCKET HOLDER • Keeps flywheels, rotors and sprockets from rotating during removal and installation • Holds sprockets and rotors with holes center-to-center at a minimum distance of 1/2” (13mm) and a maximum distance of 9” (230mm) • Features 5mm and 9mm pins • Adjustable stop-screw keeps tool open at set distance DESCRIPTION PART # Sprocket Jammer™ 3806-0064 SPROCKET JAMMER™ • Prevents rotation of chain and sprockets for easy removal or installation of countershaft nut • Can be used to pull rear wheel against chain blocks when tightening rear axle • CNC billet aluminum construction • Blue anodized finish and laser etching for easy identification DESCRIPTION PART # Countershaft seal puller 3801-0307 COUNTERSHAFT SEAL PULLER • Safely removes countershaft seals with an ID of 29mm to 47mm • Works on off-road, street and ATV engines • Unique expansion mechanism ensures seal is pulled straight and will not damage engine cases during extraction • The only puller designed specifically for countershaft seals • Durable steel construction DESCRIPTION PART # Counter balancer and clutch hub spanner 3803-0016 COUNTER BALANCER AND CLUTCH HUB SPANNER FOR HONDA • Replaces 20mm end of Honda OEM tool 07716-0020100 • Used to remove Honda OEM nut 90231-KY4-900 • 4-pin spanner made of heat-treated steel • 20mm ID • Use with a 3/8” driver • Fits counter balancer nut on CRF450R 02-07/CRF450X 05-08 • Fits clutch hub nut on PC50 69-70, Z50 68-99, S65 65-69 • Fits crank shaft nut on CA100 (Trail 50) 61-62, CA102 62-69, CA105 (Trail 50) 63-65 and CA110 62-69 DESCRIPTION PART # Deluxe piston pin puller 3801-0147 DELUXE PISTON PIN TOOL • Interchangeable piston adapters • Made of durable 6061 aluminum • Fits all piston pins from 13mm (.511”) to 24mm (1”) • Works on both full skirt and short skirt (slipper) pistons • Non-marring aluminum pin adapters • Durable blue anodized finish with laser-engraved logo DESCRIPTION PART # Adjustable torque wrench adapter 3850-0078 ADJUSTABLE TORQUE WRENCH ADAPTER • Torque any fastener with a combination wrench or Allen wrench • Will work with 6mm (1/4”) through 19mm (3/4”) combination wrenches • Will work with 6mm (1/4”) through 8mm (5/16”) Allen wrenches • Heat-treated steel with a black oxide finish •3/8” square drive is rated for a maximum torque of 90 ft.-lbs. (122.02 N-m) • Made in the U.S.A. DESCRIPTION PART # Torque wrench adapter MP08-134 TORQUE WRENCH ADAPTER • Chrome-vanadium tool steel with hard nickel-pewter finish • Properly torque 2-stroke cylinder base nuts and hard-to-reach fasteners • Fits 12mm and 14mm nuts and bolts • Extends the reach of any 3/8”-drive torque wrench by 3” • Chart supplied for torque conversions • Check owner’s manual for proper torque specifications
RkJQdWJsaXNoZXIy NDI5NTY=