BOLD MAGENTA part numbers are new for 2024 SERVICE & MAINTENANCE TOOLS PARTSCANADA.COM TIRE & SERVICE | 2024 335 DESCRIPTION PART # Optimate 4 quad program 3807-0675 DESCRIPTION PART # Optimate 4 quad premium program 3807-0676 DESCRIPTION PART # OptiMate 4 1A 3807-0429 OPTIMATE™ 4 DUAL PROGRAM WEATHERPROOF DESULFATING BATTERY CHARGER/MAINTAINER • The OptiMate 4 saves neglected, deep-discharged batteries that other smart chargers can’t • Ideal for all AGM, gel and standard filler cap batteries from 3Ah to 50Ah • IP64 weatherproof sealed enclosure with built-in mounting option • Now compatible with either conventional or CANbus motorcycle electrical systems • Switch between STANDARD or CANbus programs with a simple five-step procedure (charger comes preprogrammed STANDARD for conventional electrical systems); you can switch programs as many times as you want. LED indication confirms the CANbus program is active • Previously, when the battery in a CANbus system was fully charged and a charger moved into the maintenance program, the CANbus system would automatically disconnect the charging circuit and require intervention from the user to reactivate • With the OptiMate 4 DUAL PROGRAM, it is now possible to automatically charge and maintain CANbus equipped motorcycles via their convenient external 12V charging port, without use of the ignition key or reactivation (CANbus connection cord sold separately) • Control panel with 10 LEDs display all vital battery information • Cable bushings avoid insulation stress in ultra-cold temperatures • SAE weatherproof connections DESCRIPTION PART # OptiMate 4 for BMW 1A 3807-0430 OPTIMATE™ 4 DUAL PROGRAM BMW EDITION WEATHERPROOF DESULFATING BATTERY CHARGER/MAINTAINER • Special edition OptiMate 4 Dual Program that has been optimized for CANbus equipped BMW motorcycles • Charger comes preprogrammed with the CANbus charging and maintaining program • Previously when the battery in a CANbus system was fully charged and a charger moved into the maintenance program, the CANbus system would automatically disconnect the charging circuit and require intervention from the user to reactivate • With the OptiMate 4 DUAL PROGRAM it is now possible to automatically charge and maintain CANbus equipped motorcycles via their convenient external 12V charging port, without use of the ignition key or reactivation • Includes CANbus connection cord PART #3807-0102 for use with the OEM 12V charging port and battery clip set for bench charging • Provides optimal maintenance of your battery during long-term storage, achieved by its gentle maintenance cycle, which automatically allows the battery to rest for 30 minutes of each hour of the maintenance cycle while it remains connected • Includes fused eyelet connector for permanent mounting and battery clip set for bench charging OPTIMATE™ 4 QUAD PROGRAMER • Charger, tester and power supply for 12V lead-acid and 12.8V lithium batteries • OptiMate 4 Dual Program tests before & after charging and can recover a ‘dead-flat’ battery from as low as 0.5 Volts • Safe low voltage pulse desulphation • Continuous charging if healthy, stops and warns if faulty • Provides 24/7 protection by preventing discharge from connected circuitry and guarantees more battery power • Tests battery state of health • Fully sealed case to protect against spillage and light rain • Rated for use down to -40 °C / -40 °F NOTE: Part #3807-0676 includes the O-19 cable accessory. 3807-0675 3807-0676
RkJQdWJsaXNoZXIy NDI5NTY=