BOLD MAGENTA part numbers are new for 2024 PARTSCANADA.COM 2024 | TIRE & SERVICE SERVICE & MAINTENANCE TOOLS 342 DESCRIPTION PART # 12V/1.25A 02101281 Repl. snap cord, black 0810-06962 DESCRIPTION PART # 25’ snap cord extension 081-0148-25 1 Has eye connectors. 2 Not for sale in California or Oregon. BATTERY TENDER® PLUS • Constantly monitors the battery without the damaging effects of trickle chargers; a trickle charger will eventually boil dry or overcharge a battery • Battery Tender Plus voltage output compensates for temperature changes, providing additional protection • Initial charge brings battery to full charge at approximately 14.6V • After full charge is reached, converts to float charger and monitors battery at 13.2V • Although a constant charge is being applied to the battery, there is little or no current (approx. 10mA) • Periodic maintenance is recommended, but Battery Tender can monitor a battery for years without the fear of boiling or destroying the battery • 12V Battery Tender Plus has fused quick-disconnect rings with a weather cover • Optional Battery Tender storage pouch for safe and easy storage or transportation is available separately; see page 344 for PART #500-0017X NOTE: Earlier model Battery Tenders have a WHITE snap cord connector; later models have a BLACK snap cord connector. These snap cords are NOT interchangeable. DESCRIPTION PART # Wireless battery monitor 3807-0423 WIRELESS BATTERY MONITOR • Monitor alerts you to battery issues before they become a problem via messages sent straight to your phone • Battery can be monitored remotely with WiFi connectivity • Compatible with standard SAE connectors • For use with Battery Tender® app DESCRIPTION PART # 4A selectable charger 3807-0401 BATTERY TENDER® 4A SELECTABLE CHARGER • Equipped with proper charge algorithm for charge and maintenance of 6V, 12V,AGM, lead acid or lithium batteries to ensure long-term battery health • Selectable battery chemistry – has battery chemistry selection with proper charge algorithm for lead-acid, flooded or sealed maintenance free (AGM and gel cell) and lithium batteries • Complete four-step charging program (initialization, bulk charge, absorption mode and float mode) • Automatically switches to float/maintenance voltage after fully charging the battery • If the battery voltage drops too far under load, full charger output power resumes • 12V at 4A output and 120VAC at 50/60Hz input • Solid state, two-color LED indicates stage of charger • Spark-proof and reverse polarity protected • 12’ output cord 0210128
RkJQdWJsaXNoZXIy NDI5NTY=