BOLD MAGENTA part numbers are new for 2024 SERVICE & MAINTENANCE TOOLS PARTSCANADA.COM TIRE & SERVICE | 2024 365 DESCRIPTION PART # Pivot suspension vise 3805-0148 PIVOT SUSPENSION VISE • Designed to make suspension service simple and quick • Holds shocks and forks securely while you change oil, re-valve, or change seals • Pivoting head holds parts in any position, with mechanical stops every 45° • Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4-point grip system • Large side holds 39mm to 69mm diameter parts • Small side holds 14mm to 39mm diameter parts • Steel frame is rigid yet has a small footprint, with four pre-drilled holes in the base for secure mounting to a bench • Movable fluid catch pan with mesh insert, and threaded drain bung • Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip • Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements • Can be used to assist in removing fork compression valve assembly (use of stock front axle required) • Holds shock firmly around shock body, shaft or shock reservoir • Facilitates removal of piston rod and seal head • Facilitates removal of shock reservoir caps, chamber pistons or bladder • Holds shock to remove spherical bearings or needle bearings • Holds shocks for removal of shock spring DESCRIPTION PART # Fork oil level kit FOL-1 FORK OIL LEVEL KIT • A rugged, accurate measuring scale to adjust fork oil height • Built-in memory device to eliminate guesswork DESCRIPTION PART # Fork oil level adjustment kit FOL-2 FORK OIL LEVEL ADJUSTMENT KIT • A fork oil level measurer and adjuster in one • Simply set stop to recommended height, lower into fork and reverse pump to suck oil out until level is reached DESCRIPTION PART # 35-36mm 3805-0086 37mm 3805-0087 DESCRIPTION PART # 39mm 3805-0088 41mm 3805-0089 DESCRIPTION PART # 43mm 3805-0090 45mm 3805-0091 DESCRIPTION PART # 46-47mm 3805-0092 48mm 3805-0093 DESCRIPTION PART # 49mm 3805-0173 50mm 3805-0174 RINGER FORK SEAL DRIVERS • Innovative design makes tool easier and more secure to use than old-fashioned pin-aligned drivers • Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use • No more worrying about part of the tool falling off and damaging the fork leg or hitting your feet • Perfectly weighted to drive seals • Body halves are machined from durable carbon steel and feature high-quality protective black e-coat with laser-engraved markings SIZE PART # 38-39mm TFSD39 47-48mm TFSD48 SIZE PART # 49-50mm TFSD50 FORK SEAL DRIVERS • Split fork seal drivers save headaches and seals • Fit both inverted and conventional forks DESCRIPTION PART # Fork leg holder tool 3805-0032 FORK LEG HOLDER TOOL • Holds fork legs and tubes for easy hands-free servicing or rebuilding • Mounts in vise to hold fork firmly during repair without causing damage to fork assembly • Will not scratch finish • Made in the U.S.A. 3805-0086
RkJQdWJsaXNoZXIy NDI5NTY=