BOLD MAGENTA part numbers are new for 2024 PARTSCANADA.COM 2024 | TIRE & SERVICE SERVICE & MAINTENANCE TOOLS 366 DESCRIPTION PART # Fork fluid filler 3805-0114 FORK FLUID FILLER • Ultimate tool for servicing fork oil on conventional forks with a drain screw • Huge time saver by not having to remove fairing, handlebars and other parts • No need to remove fork caps • Must be used with Mityvac vacuum pump (PART #3850-0104) or similar; available separately • Not for use with cartridge or inverted forks • Made in the U.S.A. DESCRIPTION PART # 5-in-1 damper rod bleed tool 3805-0154 5-IN-1 DAMPER ROD BLEED TOOL • Tool design allows for effortless retrieval of damping rod after spring installation • Perfect for working on Kayaba, Showa and WP inverted forks • One-piece design means no lost parts • Rod includes downward-facing bleed port to prevent oil splatter • Five thread sizes in one tool: M10 x 1.0, M10 x 1.25, M12 x 1.0, M12 x 1.25 and M14 x 1.0 • Precision billet aluminum construction with durable blue anodized finish and laser-engraved markings DESCRIPTION PART # Fork cartridge holding tool 3805-0077 FORK CARTRIDGE HOLDING TOOL FOR SHOWA BPF FORKS • Holds fork cartridges for disassembly, assembly and removal of cartridge seal head from the tube DESCRIPTION PART # Cartridge fork holding tool TFHP01 CARTRIDGE FORK HOLDING TOOL • Makes disassembly and assembly of twin-chamber cartridge forks easier by holding cartridge rod while bottom nut is loosened or tightened DESCRIPTION PART # Cartridge bleeding tool kit 3805-0004 CARTRIDGE BLEEDING TOOL KIT • Easily threads onto the damping rod to facilitate cartridge fork bleeding when changing fork oil • Baffled to eliminate the mess normally encountered when bleeding cartridges • Kit includes adapters for 10mm L x 1.0mm, 12mm L x 1.0mm, 12mm L x 1.25mm and 14mm L x 1.0mm damping rods • Zinc coated DESCRIPTION PART # Damping rod holding tool 3805-0139 DAMPING ROD HOLDING TOOL • Tapered aluminum rod designed to make spinning damper rods easier to remove • Taper wedges into most damping rods, holding the rod securely in place DESCRIPTION PART # Damper rod fork tool MP08-117 DAMPER ROD FORK TOOL • Aids in assembly and disassembly of most 41, 43, 46 and 47mm Kayaba and Showa inverted forks • Not required on Honda CR 91-92 models • Hardened steel with black finish
RkJQdWJsaXNoZXIy NDI5NTY=