BOLD MAGENTA part numbers are new for 2024 SERVICE & MAINTENANCE TOOLS PARTSCANADA.COM TIRE & SERVICE | 2024 369 DESCRIPTION PART # Heavy-duty pin spanner 3805-0211 HEAVY-DUTY PIN SPANNER • Designed for removal and installation of shock reservoirs, screw-in seal heads, fork caps and bearing retainers • Freely pivoting arms span a range of 10.5mm to 150mm • Interchangeable 3mm, 4mm and 5mm hardened steel pins (replacement pin set available separately) •3/8” square drive for use with a breaker bar or torque wrench • Curved, low-profile arms easily fit tight areas • Billet heat-treated steel construction for increased strength, rigidity and durability • Durable black oxide finish with laser-engraved markings • Maximum torque rating of 70 lb.-ft. DESCRIPTION PART # Fork clicker adjuster tool 3805-0026 FORK CLICKER ADJUSTER TOOL • The easy way to adjust hard-to-reach fork clickers • Tool is made of anodized billet aluminum and is flat enough to fit between the bars and fork tubes on almost any setup DESCRIPTION PART # Air fork hex tool (22mm) 3805-0125 AIR FORK HEX TOOL FOR SHOWA SFF FORKS • Removes the 22mm lower sealing bolt from Showa SFF Air Fork • Nonmarking 6061 billet aluminum construction • Anodized finish • Made in the U.S.A. DESCRIPTION PART # Pin spanner wrench 3850-0324 DESCRIPTION PART # KYB fork compression body removal tool 3805-0145 KYB FORK COMPRESSION BODY REMOVAL TOOL • Fits inside the fork for easy removal of the compression body from the cartridge • One side is 35mm to fit cartridge and the other is 19mm for socket or box wrench PIN SPANNER WRENCH • Unique curved billet aluminum arms provide clearance and ease of use • Stainless steel shoulder bolt pivot • Replaceable hardened tool steel pins • Includes 4mm and 3mm pins • Low-profile pins provide added clearance on fork caps • Durable blue anodized finish with laser-engraved markings • Designed for use on many forks and shock absorbers DESCRIPTION PART # Fork compression valve removal tool 3805-0022 FORK COMPRESSION VALVE REMOVAL TOOL • For Honda CRF250R 10-12, CRF450R 09-12, Kawasaki KX250F 11-13, KX450F 09-12,Yamaha YZ125/250 05-18, YZ250F/450F 06-18,YZ250FX 06-18 and YZ450FX 16-18 • For removing the compression valve from the fork cartridge • 19mm drive hex; 36mm octagon • Manufactured from billet 6061-T6 aluminum • Replaces Yamaha OEMYM-01500 and Honda 070MB-MENA100 DESCRIPTION PART # Compression bolt removal tool 3801-0111 COMPRESSION BOLT REMOVAL TOOL FOR KTM • Fits 07-17 KTM with WP 4860 MXMA CC forks • For removing and installing the compression valve assembly from the fork cap • 17mm hex head • Made from billet 6061-T6 aluminum • Anodized finish with laser engraving CAUTION: Fork cap assembly under pressure! Always wear safety glasses and refer to the fork manufacturers for correct assembly and disassembly procedures.
RkJQdWJsaXNoZXIy NDI5NTY=