BOLD MAGENTA part numbers are new for 2024 PARTSCANADA.COM 2024 | TIRE & SERVICE SERVICE & MAINTENANCE TOOLS 372 DESCRIPTION PART # Gauge and filler P572 Nitrogen needle set 3805-0012 DESCRIPTION PART # Repl. nitrogen needle 3805-0155 Schrader valve extension 876832 NITROGEN SHOCK GAUGE, FILLER AND NEEDLE • 300-psi capacity • Regulator and transfer hose required to get nitrogen from tank to nitrogen Shock Gauge and Filler • Bleeder valve and T-handle plunger pin chuck • Swivel chuck has a 12” flexible hose • Instructions, carrying box and Schrader valve extension included (required on some Showa shocks) • Nitrogen needle is used to fill shocks with self-sealing rubber valves (some Yamaha, Fox and Öhlins) • Instructions included • Made in the U.S.A. DESCRIPTION PART # Small body, 0-30 lb. GP-0-30 DESCRIPTION PART # Small body, 0-60 lb. GP-0-60 DESCRIPTION PART # Small body, 0-100 lb. GP-0-100 DESCRIPTION PART # Small body, 0-300 lb. GP3-300 GAUGE-MOUNTED PUMPS • Perfect for air shocks, forks and emergency tire repairs • Easy to operate • Let-down valve allows for minute adjustments • Check valve for no leaks and ability to disconnect DESCRIPTION PART # Digital gauge pump 3805-0116 DIGITAL GAUGE PUMP • Compact pump with digital gauge for adjusting air pressure in your forks or shocks • Uses a flexible hose with no-loss connector for reaching air valves in tight spaces • Accurate gauge and micro-adjust air bleed allow for precise air fill in shock or forks • 0-300 psi range • Durable aluminum body • Precise fill and bleed • Accurate (+0.5 psi) pressure gauge DESCRIPTION PART # Nitrogen valve assembly kit SPNV0512 NITROGEN VALVE ASSEMBLY KIT FOR WP PIGGYBACK SHOCKS • Eliminates the expensive-to-use and cumbersome stock nitrogen filling system • Simply replace the standard Allen-head bolt with the Race Tech needle valve, then use standard nitrogen needle to fill DESCRIPTION PART # Nitrogen Gauge Pro 3805-0020 DESCRIPTION PART # Nitrogen hose 3805-0021 NITROGEN GAUGE AND HOSE • High quality at low cost • 0-300 psi gauge does not require a wrench and reaches hard-to-get valve stems • Nitrogen hose is a special 800 psi hose with finger-tight 1/4” flare nut quick-couplings NOTE: Race Tech nitrogen hose and gauges are meant to work together but can be adapted with standard 1/4” fittings. DESCRIPTION PART # Nitrogen regulator 261810 NITROGEN REGULATOR • Excellent quality, dual-gauge nitrogen regulator • Output to 300 psi • Comes with a 1/4” flare nut fitting DESCRIPTION PART # Nitrogen needle TSNN01 NITROGEN NEEDLE FOR SHOCKS • Adapts shocks with self-sealing rubber valves for use with Race Tech nitrogen gauge PART #3805-0020 GP-0-100 GP-0-30 GP3-300 3805-0020 3805-0021 3805-0012 P572 WARNING: For use by trained professional mechanics only! Improper use could result in great bodily injury or death. NOTE: Nitrogen needle not available in NY, CT, IL,MA and RI.
RkJQdWJsaXNoZXIy NDI5NTY=