BOLD MAGENTA part numbers are new for 2024 SERVICE & MAINTENANCE TOOLS PARTSCANADA.COM TIRE & SERVICE | 2024 385 DESCRIPTION TRACK PITCH TRACK LENGTH TRACK WIDTH TRACK PLY PART # Template for single-ply tracks with 2.52 pitch in sizes 14”/15” x 128”. Stud patterns of 102 & 153 2.52 128” 14”/15” Single 3820-0010 Template for 3.0 pitch single-ply track. Length 141”. Stud patterns of 94 and 141 3.00 141” 15” Single 3820-0011 Template for two-ply tracks with 2.86 pitch that are 15”/16” wide by 120”/1 29”/137”/146”/154” long. Several studding quantities & patterns 2.86 120”/129”/137”/ 146”/154” 15”/16” 2 ply 3820-0035 Template for single-ply tracks with 2.86 pitch in sizes 15”/16” wide by 120”/1 37” long. Stud patterns of 84, 96, 126, & 144 2.86 120”/137” 15”/16” Single 3820-0033 Template for two-ply tracks with 2.86 pitch in sizes 15” x 129”/137”. Stud patterns of 90, 96, 135, & 144 2.86 129”/137” 15” 2 ply 3820-0021 Template for two-ply tracks with 2.52 pitch. Stud patterns of 96, 102, 108, 114, 120, 135, 144, 153, 162, 171, 187, 192, & 198 2.52 121”/128”/136”/ 144” 13.5” / 14” / 15” / 16” 2 ply 3820-0034 STUDDING TEMPLATES • Stud patterns on Woody’s® templates are CAD-designed to maintain track balance • Follow the instructions and you will have the highest level of precision stud placement • Printed on laminated heavy card stock DESCRIPTION PART # Track tension tool 3820-0005 TRACK TENSION TOOL • Make sure the track’s tension is within the manufacturer’s guidelines DESCRIPTION PART # Track hole drill 3820-0015 UNIVERSAL TRACK HOLE DRILL • Perfect every time – makes studding easy • Hollow drill for 7mm or 5/16” studs makes a precise opening for installing studs • For 7mm T-nut studs and 5/16” push-through studs use 7mm drill ANGLE PART # 30° TOOL-SHARP3 ANGLE PART # 45° TOOL-SHARP4 ANGLE PART # 60° TOOL-SHARP6 STEEL STUD SHARPENING TOOLS • Easy to use – just put the tool into a 3/8” drill chuck and sharpen studs while they’re on the sled • Available in 30°, 45° and 60° angles DESCRIPTION STUD SIZE PART # For square backer plates 5/16” SPI-TOOL-5 INDEXING TOOL FOR SUPPORT PLATES • Real time-saver • Fits on a standard 3/8” drive ratchet • Holds support plates while stud-securing nut is tightened DESCRIPTION PART # Track marker TRAK-MARK TRACK MARKER • White dots from marker facilitate hole placement • An easy way to see how your pattern is developing • Use the track marker and a template to plan the layout of any stud pattern DESCRIPTION PART # Track saver tool 550739 TRACK SAVER TOOL • Invaluable for removing or installing dished T-nuts • Snaps onto any 3/8” drive ratchet DESCRIPTION PART # Shallow socket tool SCW-4505 SHALLOW SOCKET TOOL • A unique tool used for driving locknuts down on push-through studs • Provides the torque to tighten without touching the surface of the support plate • Will not scuff finish of colored support plates • Available in 5/16” size 3820-0010 3820-0035 TOOL-SHARP3
RkJQdWJsaXNoZXIy NDI5NTY=