11 TECH-AIR® ALPINESTARS APPAREL COLLECTION 2025 Tech-Air® 3 incorporates Alpinestars’ Pro 2nd Generation compact Electronic Control Unit (ECU) which may be found in the ECU pocket located in the upper back of the inner, Tech-Air® 3 vest. Bluetooth low energy (BLE 5.0) connectivity to the Tech-Air® App allows riders to monitor the System’s operational status, battery status, as well as provides a detailed map of motorcyclists rides via MyRide. Upgradable system software is accessible via the Tech-Air® App, where riders can quickly verify the installed software version and eventually perform the latest software updates. Tech-Air® 3 uses an integrated, certified lithium ion battery, with a battery life of 40 hours and a recharge time of approximately 4 hours. The gas inflator that provides the inflation gas for the airbag’s deployment is located in the inflator housing on the left side of the lower back of the rider. Tech-Air® 3’s ECU seal-protection ensures all-weather performance and is certified to function between -20 °C and +40°C. The gas inflator housing, electronic wiring, and the airbag are easily removable. The gas inflator canisters can be replaced by select Alpinestars dealers and certified Tech-Air Service Centers. The vest is washable. The ECU has been tested and CE Certified according to different regulations for electronic, radio devices and electrical safety. The gas inflator cartridge is CE certified to UNI EN 16263, confirming compliance with the safety standard and certifying that the cartridges can be safely handled and serviced. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: When inflated, the Tech-Air® 3 full chest and full back protection from the airbag is Category II CE Certified to the (EU) 2016/425 EEC European Personal Protective Equipment (PPE) Regulation, according to relevant part of EN1621-4:2013 airbag certification standard, which guarantees an impact protection performance of not less than five seconds after the activation. The impact attenuation performance is Level 2 both for full chest and full back. Impact protective garment 17092-6 Class C (outer garment), with the outershell constructed from water resistant material. *Note: 1. Performance tested according to DOLOMITICERT S.c.a.r.l. M.115.001 Protocol for Airbag Protectors Rev.4_14 10 2018. 2. For more detailed explanation and warnings, refer to the information to be found in the Tech-Air® 3 System Manual.
RkJQdWJsaXNoZXIy NDI5NTY=