Alpinestars Fall Intro Collection 2025 ALPINESTARS.COM
2
APPAREL ALPINESTARS 3
HELMETS 4 ALPINESTARS FALL INTRO COLLECTION 2025 SUPERTECH R10 HELMET Alpinestars brings the Supertech R10 road racing helmet following years of extensive research, development, and testing by Alpinestars’ Helmet Product Development Department, together with MotoGP legend Andrea Dovizioso, and MotoGP riders’ Jorge Martin, and Jack Miller. With the S-R10, the focus of the design was to ensure the highest level of performance, especially when it comes to protection and a new level of safety. The S-R10 Helmet has been engineered to provide the perfect blend of excellent ventilation, unsurpassed comfort, and the lightest weight possible, without compromising on any other front. Another crucial element unique to the S-R10’s design and development is the helmet’s advanced aerodynamics, with countless sessions in the wind tunnel aimed at reducing drag and providing optimal aerodynamic stability. OUTER SHELL Carbon shell construction mult-layer composite disperses energy in impacts Homologated to ECE 22.06, DOT, and FIM standards, the Supertech R10’s shell construction utilizes a highly advanced molding technology with a multi-composite combination featuring a 3K high-density carbon outer later, a uni-directional carbon composite layer, an aramid fiber layer, and a fiberglass one. The 3K high density carbon outer layer provides excellent strength and efficiency of energy dissipation over the shell. The uni-directional (UD) carbon composite layer provides significantly greater radial strength around the shell, preventing compression, but allowing controlled deflection for reducing transmitted impact energy. And the aramid fiber plus fiberglass layers provide critical penetration protection. This layered composite combination created by bonding everything together with an advanced epoxy resin already applied on the pre-preg fiber, perfectly controls the ideal proportion of resin versus fiber to maximize strength, mechanical performance, and lightweight. The combination of material layers provides improved energy management, as well as limited outer shell deflection, making the energy spread wider and better absorbed by the EPS liner. The S-R10’s unique shell construction results in extremely effective impact protection. With a fully equipped in-house helmet testing facility within Alpinestars’ state-of-the-art Research and Development center, the company has carried out an exhaustive impact research program. Our research and development efforts have shown the S-R10 returning linear and oblique impact performance results which far exceed current ECE 22.06 helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the S-R10 surpasses the standard by an average magnitude of 37%. And for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-R10 exceeds the standard by 65%. INNER SHELL The S-R10’s inner shell is made from eps in different densities. The S-R10 has four inner shells just like the outer shell and is available in four anatomical sizes. The S-R10’s construction is optimized to ensure riders have the correct fit, which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact. Underneath the helmet’s outer shell is an eight-piece multi-density EPS liner, with six specific densities that are strategically positioned in different zones to ensure excellent energy absorption from impact forces dissipated over the outer shell, as well as a close and comfortable fit. The EPS liner, just like the outer shell, has its own unique dimension for each helmet size, further tailoring the helmet’s performance and fit when it comes to protection and comfort. Linear and oblique force management The EPS inner surface is smooth, creating an optimized, low friction area, for superior oblique impact management. When it comes to other types of helmet testing, the best helmets are those that provide protection against rotational, as well as oblique and linear impact forces.
HELMETS 5 ALPINESTARS FALL INTRO COLLECTION 2025 To help fight and mitigate those rotational, oblique, and linear impact forces, Alpinestars has designed a low friction surface on the inner surface of the EPS liner. The inner surface is polished to be incredibly smooth, and then specially coated to reduce friction even further, allowing the comfort liner to move against the EPS. The result is increased rotational and oblique and linear force management, allowing the rider’s head to move independently inside of the helmet, or vice-versa, which can significantly reduce the amount of force transmitted to the head, neck, brain, and spine from an oblique impact, while simultaneously reducing the possibility of a concussion. To recap, specific rotational impact protection is provided by the combination of the internal shape and the specific coating of the EPS liner, coupled with the specially developed surface in the comfort liner. This patented technology reduces rotational acceleration transmitted to the rider’s head. A-HEAD FITMENT SYSTEM Adding to the personalization and custom, tailor-made fit of the S-R10, is the helmet’s unique and patented A-Head Fitment System. The A-Head System allows the helmet to be tuned exactly to the rider’s preference by having the ability to adjust both the height and angle at which the helmet sits on the head. The EPS is fitted with the A-Head Fitment System that allows for an ultra-specific setup that can be adapted to how deep the rider’s head sits in the helmet, as well as how far forward or backward the helmet is tilted. AERODYNAMICS Developed with CFD simulations, validated in the wind tunnel and on track, the S-R10 helmet is optimized for low drag performance and maximum aerodynamic stability. The S-R10 has been developed in the full-scale wind tunnel since the beginning of its development. Aerodynamic targets for coefficient of drag in different head positions, as well as stability at different angles were a primary goal in the helmet shape development, first extensively developed with Computational Fluid Dynamics, then validated in the full-scale wind tunnel and finally on track. The result is a helmet that achieves the lowest level of drag, and the highest level of aerodynamic stability at high speed compared to any other race helmet we have tested in the wind gallery. This has made the S-R10 already the helmet of choice by factory MotoGP teams for its top aero performance. The road riders will benefit from this too, with reduced strain on their neck at high speed and low levels of wind noise. The S-R10 comes with two separate aerodynamic spoilers – a standard, and longer race version – and they’re both fitted with an Alpinestars patented release system, with elastic joints that help the spoiler detach from the helmet shell if it is subjected to a significant impact, no matter the angle, to reduce potential rotational energy. There are also lateral winglets to further support the S-R10’s stability and improve aerodynamic drag. In addition, the helmet visor has turbulators to improve aero-acoustic performance. As a result, compared to the aerodynamic performance of the helmet fitted with the standard road spoiler, the S-R10 itself is already the top performing aerodynamic helmet we have tested, and with the configuration of the race spoiler and the aero winglets together, we have achieved a reduction in drag by an additional 4.54%. VENTILATION The Supertech R10 helmet contains 11 ventilation points When it comes to ventilation and breathability, there are 11 ventilation ports, not including the eye port, with 7 intakes including 3 in the chinguard and 4 on the top of the helmet, plus 4 exhausts, with 2 lateral ports on the chin bar, and 2 on the top rear of the helmet. These ventilation ports integrate directly with the helmet’s shell with a series of air ducts through the inner EPS liner. With the S-R10, airflow comes in through the ports, as well as actively circulates over and around the rider’s head through a series of channels and then gets extracted out the back of the helmet. The top vent features a large central slider which channels air down to the top of the head for better comfort, which when open, has vents for hot air extraction from the rider’s forehead. Under the rear spoiler there are two extractor vents for effective hot air exhausting. The chin vents are formed by two openings located at the front of the helmet at the sides of the shield lock mechanism, where each flap has a tab in the corner, which is used to open or close the vent. Air entering from this point is channeled towards the inner side of the shields, creating a laminated flow of air that effectively prevents fogging and misting. And additionally, the chin bar vents are used to extract humid air to the outside of the helmet. SHIELD FEATURES The shield mechanism is fitted with metal lock components to prevent unwanted shield detachment during impacts, locked in the closed poition by a front metal lock. The visor has two unique features including a metal locking mechanism lever to prevent unwanted shield detachment during impacts and/or crashes, plus a lowered side line for a maximized field of view, coming on top of an already outstanding wide eyeport providing 220-degrees of lateral and 57-degrees of vertical visibility for great riding comfort. The shield attaches to the shell via side cams mechanisms, allowing the shield to rotate and to move, in order to seal it completely against the helmet’s rubber win Additionally, the visor itself can be easily changed or removed thanks to its secure and toolless quick-release system. The S-R10 is fitted with an Optical Class 1 shield, 3mm in thickness, and coated with an antiscratch and anti-fog treatment. The shield is equipped with internal pins to accommodate a PINLOCK 120XLT - 100 % MAX VISION lens and external pins to accommodate tear-offs. REMOVABLE LINING Linings are removable and washable, and feature fabrics with anti-microbial treatmentsz Crown Pad: The crown pad and the neck pad are elastically connected, for enhanced oblique impact management, with a construction based on four panels (front, sides, rear), for an optimized fit with the proper foam thickness. Top Pad: The top pad is removable and height adjustable via the A-Head Fitment System. Cheek Pads: The cheek pads are fitted with premium foam and fabrics, offering comfort and breathability. The cheek pads also feature an emergency extraction system, allowing the side cheek padding to be easily removed by trackside support and medical staff, and they also have a channel for the installation of a hydration system. CHIN BAR PROFILE Another outer shell design protection feature is the chin bar’s profile, where the base area has been specifically sculpted to give a relief section. Thebottom profile is raised to clear the collarbone, and instead of the hard carbon shell coming into potential contact with the collarbone, the S-R10 has a softer EPP (expanded Polypropylene) liner which extends beyond the helmet shell itself and is covered by a more flexible rubber compound. This chin bar design provides a reduced chance of any sort of collarbone injury, one of the more common injuries in motorcycling. WEIGHT And finally, when it comes to weight, the ECE / DOT / FIM certified Supertech R10 helmet tips the scales at an impressive 1,540 grams for a size medium, or 3.4 pounds, providing the S-R10 with an extremely high performance to protection to weight ratio.
HELMETS 6 ALPINESTARS FALL INTRO COLLECTION 2025 0133-1526 0133-1528 PRICE: $34.95 PRICE: $39.95 S-R10 TEAM STANDARD SPOILER - BLK/RD/WHT S-R10 TEAM RACE SPOILER - BLK/RD/WHT SUPERTECH R10 TEAM 0101-16975 0101-16976 0101-16977 0101-16978 0101-16979 0101-16980 BLACK CARBON RED WHITE GLOSSY XS S M L XL 2XL SZ HOMOLOGATION: ECE 22.06 / DOT / FIM Comes with Standard Spoiler configuration. Optional Race Spoiler is available. PRICE: $ 1599.95
HELMETS 7 ALPINESTARS FALL INTRO COLLECTION 2025 SUPERTECH R10 TEAM 0101-16981 0101-16982 0101-16983 0101-16984 0101-16985 0101-16986 BLACK CARBON RED FLUO DARK BLUE MATT XS S M L XL 2XL SZ 0133-1527 0133-1529 PRICE: $34.95 PRICE: $39.95 S-R10 TEAM STANDARD SPOILER - BLK/RD/BL S-R10 TEAM RACE SPOILER - BLK/RD/BL HOMOLOGATION: ECE 22.06 / DOT / FIM Comes with Standard Spoiler configuration. Optional Race Spoiler is available. PRICE: $ 1599.95
HELMETS 8 ALPINESTARS FALL INTRO COLLECTION 2025 0133-1522 0133-1524 PRICE: $34.95 PRICE: $39.95 S-R10 ELEMENT STANDARD SPOILER - BLK/RD/WHT S-R10 ELEMENT RACE SPOILER - BLK/RD/WHT SUPERTECH R10 ELEMENT BLACK CARBON BRIGHT RED WHITE GLOSSY XS S M L XL 2XL SZ HOMOLOGATION: ECE 22.06 / DOT / FIM Comes with Standard Spoiler configuration. Optional Race Spoiler is available. 0101-16987 0101-16988 0101-16989 0101-16990 0101-16991 0101-16992 PRICE: $ 1599.95
HELMETS 9 ALPINESTARS FALL INTRO COLLECTION 2025 0101-16993 0101-16994 0101-16995 0101-16996 0101-16999 0101-17029 BLACK CARBON SILVER BLACK GLOSSY XS S M L XL 2XL SZ 0133-1523 0133-1525 PRICE: $34.95 PRICE: $39.95 S-R10 ELEMENT STANDARD SPOILER - BLK/SIL/BLK S-R10 ELEMENT RACE SPOILER - BLK/SIL/BLK SUPERTECH R10 ELEMENT HOMOLOGATION: ECE 22.06 / DOT / FIM Comes with Standard Spoiler configuration. Optional Race Spoiler is available. PRICE: $ 1599.95
HELMETS 10 ALPINESTARS FALL INTRO COLLECTION 2025 SUPERTECH R10 SOLID – BLACK 0101-17030 0101-17032 0101-17033 0101-17034 0101-17035 0101-17036 BLACK CARBON MATT AND GLOSSY XS S M L XL 2XL SZ 0133-1518 0133-1520 PRICE: $34.95 PRICE: $39.95 S-R10 STANDARD SPOILER BLACK GLOSSY S-R10 RACE SPOILER BLACK GLOSSY HOMOLOGATION: ECE 22.06 / DOT / FIM Comes with Standard Spoiler configuration. Optional Race Spoiler is available. PRICE: $ 1349.95
HELMETS 11 ALPINESTARS FALL INTRO COLLECTION 2025 SUPERTECH R10 SOLID -WHITE 0101-17037 0101-17038 0101-17039 0101-17040 0101-17041 0101-17042 WHITE GLOSSY BLACK MATT XS S M L XL 2XL SZ 0133-1519 0133-1521 PRICE: $34.95 PRICE: $39.95 S-R10 STANDARD SPOILER - WHITE GLOSSY S-R10 RACE SPOILER- WHITE GLOSSY HOMOLOGATION: ECE 22.06 / DOT / FIM Comes with Standard Spoiler configuration. Optional Race Spoiler is available. PRICE: $ 1349.95
HELMETS 12 ALPINESTARS FALL INTRO COLLECTION 2025 HELMET PKGING SUPERTECH R HELMET BAG 10 MAR 2023 COLORWAY COOL GREY 11 C 186 C REFLECTIVE BLACK BLACK OPENING END OVERHEAD HINGE END SIDE SIDE S-R10 BAG - BLACK 3514-0049 PRICE: $89.95 S-R10 SHIELD MECHANISM 0134-3684 PRICE: $66.95 S-R10 BREATH DEFLECTOR 0134-3687 PRICE: $32.95 S-R10 WIND DEFLECTOR 0134-3688 PRICE: $7.95 EAR PADS SET S-R10 0134-3676 PRICE: $22.95 TOP PAD S-R10 - Gray 0134-3683 PRICE: $39.95 S-R10 CHIN STRAP COVERS 0134-3691 PRICE: $20.95 S-R10 SHIELD MECHANISM COVER 0134-3685 PRICE: $19.95 CROWN PAD S-R10 0134-3670 0134-3671 0134-3672 0134-3673 0134-3674 0134-3675 CROWN PAD S-R10 FOR SMALL 20MM CROWN PAD S-R10 SIZE SMALL 10MM CROWN PAD S-R10 SIZE MEDIUM 15MM CROWN PAD S-R10 SIZE LARGE 15MM CROWN PAD S-R10 FOR SIZE XL 15MM CROWN PAD S-R10 FOR SIZE XL 8MM CHEEK PAD SET S-R10 0134-3663 0134-3665 0134-3666 0134-3667 0134-3668 0134-3669 CHEEK PAD SET S-R10 15MM CHEEK PAD SET S-R10 20MM CHEEK PAD SET S-R10 25MM CHEEK PAD SET S-R10 30MM CHEEK PAD SET S-R10 35MM CHEEK PAD SET S-R10 40MM CHIN CURTAIN S-R10 0134-3689 0134-3690 CHIN CURTAIN S-R10 XS/L CHIN CURTAIN S-R10 XL/2X $22.95 $22.95
HELMETS 13 ALPINESTARS FALL INTRO COLLECTION 2025 S-R10 RUBBER PLUG FOR CHIN VENT 0133-1516 PRICE: $7.95 S-R10 CONNECTORS SET FOR SPOILER 0133-1530 PRICE: $17.95 S-R10 TOP VENT 0133-1517 PRICE: $29.95 AFHS-01 PINLOCK/TEAR OFF PINS SET - TRANSPARENT 0130-1230 PRICE: $7.95 AFHS-01 SHIELD TEAR OFF SET - TRANSPARENT 0130-1224 PRICE: $19.95 AFHS-01 SHIELD PHOTOCROMIC 0130-1228 PRICE: $248.95 AFHS-01 SHIELD - DARK SMOKE 0130-1225 PRICE: $124.95 AFHS-01 SHIELD - LIGHT SMOKE 0130-1226 PRICE: $124.95 AFHS-01 SHIELD DARK SILVER MIRROR 0130-1227 PRICE: $124.95 AFHS-01 SHIELD CLEAR 0130-1229 PRICE: $99.95 AFHS-01 SHIELD PINLOCK LENS 0130-1231 PRICE: $69.95 0133-1522 0133-1524 PRICE: $34.95 PRICE: $39.95 S-R10 ELEMENT STANDARD SPOILER - BLK/RD/WHT S-R10 ELEMENT RACE SPOILER - BLK/RD/WHT 0133-1523 0133-1525 PRICE: $34.95 PRICE: $39.95 S-R10 ELEMENT STANDARD SPOILER - BLK/SIL/BLK S-R10 ELEMENT RACE SPOILER - BLK/SIL/BLK 0133-1526 0133-1528 PRICE: $34.95 PRICE: $39.95 S-R10 TEAM STANDARD SPOILER - BLK/RD/WHT S-R10 TEAM RACE SPOILER - BLK/RD/WHT 0133-1527 0133-1529 S-R10 TEAM STANDARD SPOILER - BLK/RD/BL S-R10 TEAM RACE SPOILER - BLK/RD/BL
14 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 Alpinestars Tech-Air® 3 Airbag System is an ‘over’ the jacket solution designed for cruiser and custom riders and offers effective upper body protection by covering the rider’s full chest and full back. Featuring a main chassis constructed with premium leather that has been softened for comfort, and a waterproof ECU and electronics, this slim, self-contained system can also be worn under a motorcycle jacket, including any Alpinestars’ compatible jacket, any leather or textile jacket, providing that the jacket has sufficient space to accommodate the inflation of the airbag. It’s extremely reliable; Alpinestars’ crash detection triggering algorithm has been developed and refined with over 2 million kilometers of riding data and over 2,000 crashes, allowing the system to accurately assess when to deploy the airbag ahead of an impact or other dangerous situation like a lowside or highside crash, and in the event that Tech-Air® 3 detects the start of a crash, the system will activate the protective airbag, with an average inflation time of 50ms, depending on the size of the airbag. KEY FEATURES A fully self-contained system, TechAir® 3 does not require any external connections or sensors on the motorcycle for the system to operate. Tech-Air® 3 is a fully autonomous active airbag system. Tech-Air® 3 incorporates 6 integrated sensors (3 accelerometers, 3 gyroscopes or 1 tri-axial gyroscope and 1 tri-axial accelerometer) to provide the best crash monitoring performance in a variety of dynamic riding situations. The Tech-Air® 3 Airbag System activates automatically via the magnetic zip closure. An LED display semi-hidden inside the left chest pocket continuously indicates the airbag’s operational status. The pocket has a reflective inner backing for optimized LED visibility, and the LED display also incorporates a haptic alert, which vibrates to confirm the system is armed and alerts the rider when the battery is running low. Tech-Air® 3 incorporates Alpinestars’ Pro 2nd Generation compact Electronic Control Unit (ECU) embedded in the upper back of the Tech-Air® 3 vest. Tech-Air® 3 uses the Tech-Air® 5 STREET algorithm which provides active protection in street riding scenarios and a variety of riding conditions, even when stopped. Upgradable system firmware, accessible via the Tech-Air® App. Bluetooth low energy (BLE 5.0) connectivity with the Tech-Air® App shows the system’s status, the battery status and riding data. Tech-Air® 3 uses an integrated, certified lithium ion battery, with a battery life of 40 hours and a recharge time of approximately four hours. ECU and electronics are located in a waterproof housing for proven wet weather performance. PROTECTION According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: Tech-Air® 3 full chest and full back Protection from the airbag is Category II CE Certified to the 425/2017/ EEC European Personal Protective Equipment (PPE) Regulation, according to relevant part of EN16214:2013 airbag certification standard, 2701-1360 2701-1361 2701-1362 2701-1347 2701-1348 2701-1349 2701-1350 2701-1351 BLACK XS S M L XL 2XL 3XL 4XL SZ LEATHER TECH-AIR® 3 SYSTEM PRICE: $ 939.95 SIZE: XS - 4XL
15 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 which guarantees an impact protection performance of not less than five seconds after the activation. Impact protective garment 17092 Class C (outer garment), with the outershell constructed from water resistant material. Performance tested according to DOLOMITICERT S.c.a.r.l. M.115.001 Protocol for Airbag Protectors Rev.4_14 10 2018. TECH SPECS Equipped with a central zipper to provide complete front chest coverage while also concealing the inner airbag. The internal magnetic snap button closure has been designed for ease of use, and can be closed when riding or folded open when not riding. Strategically positioned stretch panels on both sides of the abdomen to accommodate the expansion of the airbag in the event of a crash. Perforated back zone and upper panels for improved breathability, with internal air channels for enhanced airflow. Integrated back protector pocket on the back to house additional passive back protection. The argon gas canister that provides the inflation gas for the airbag’s deployment is housed in an ergonomic case on the right side of the lower back of the rider. Tech-Air®’s ECU seal-protection ensures all-weather performance and is certified to function between -20°C and +40°C. The canister housing, electronic wiring, and the airbag are easily removable. The canister can be replaced by ANY Alpinestars dealer. Short collar allows the system to be worn over any jacket. Two zippered hand pockets, two chest pockets and inner pockets, with a channel for sunglasses on the right chest pocket and a waist loop for attaching gloves for real-world practicality. Chassis is constructed with a water resistant treatment for effective all-weather performance. Packable design means the system can be stored in a backpack or under a bike’s seat when not in use. The Argon inflator cartridge is CE certified to ISO26263, confirming compliance with the safety standard and certifying that the cartridges can be safely handled and serviced.
16 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 Alpinestars Tech-Air® 3 Airbag System is an ‘over’ the jacket solution designed for commuters and younger riders and offers effective upper body protection by covering the rider’s full chest and full back. Featuring a water resistant stretch nylon canvas main chassis and a waterproof ECU and electronics, this slim, self-contained system can also be worn under a motorcycle jacket, including any Alpinestars’ compatible jacket, any leather or textile jacket, providing that the jacket has sufficient space to accommodate the inflation of the airbag. It’s extremely reliable; Alpinestars’ crash detection triggering algorithm has been developed and refined with over 2 million kilometers of riding data and over 2,000 crashes, allowing the system to accurately assess when to deploy the airbag ahead of an impact or other dangerous situation like a lowside or highside crash, and in the event that Tech-Air® 3 detects the start of a crash, the system will activate the protective airbag, with an average inflation time of 50ms, depending on the size of the airbag. KEY FEATURES A fully self-contained system, TechAir® 3 does not require any external connections or sensors on the motorcycle for the system to operate. Tech-Air® 3 is a fully autonomous active airbag system. Tech-Air® 3 incorporates 6 integrated sensors (3 accelerometers, 3 gyroscopes or 1 tri-axial gyroscope and 1 tri-axial accelerometer) to provide the best crash monitoring performance in a variety of dynamic riding situations. The Tech-Air® 3 Airbag System activates automatically via the magnetic zip closure. An LED display semi-hidden inside the left chest pocket continuously indicates the airbag’s operational status. The pocket has a reflective inner backing for optimized LED visibility, and the LED display also incorporates a haptic alert, which vibrates to confirm the system is armed and alerts the rider when the battery is running low. Tech-Air® 3 incorporates Alpinestars’ Pro 2nd Generation compact Electronic Control Unit (ECU) embedded in the upper back of the Tech-Air® 3 vest. Tech-Air® 3 uses the Tech-Air® 5 STREET algorithm which provides active protection in street riding scenarios and a variety of riding conditions, even when stopped. Upgradable system firmware, accessible via the Tech-Air® App. Bluetooth low energy (BLE 5.0) connectivity with the Tech-Air® App shows the system’s status, the battery status and riding data. Tech-Air® 3 uses an integrated, certified lithium ion battery, with a battery life of 40 hours and a recharge time of approximately four hours. ECU and electronics are located in a waterproof housing for proven wet weather performance. PROTECTION According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: Tech-Air® 3 full chest and full back Protection from the airbag is Category II CE Certified to the 425/2017/EEC European Personal Protective Equipment (PPE) Regulation, according to relevant part of EN1621-4:2013 airbag certification standard, which guarantees an impact protection performance 2701-1352 2701-1353 2701-1354 2701-1355 2701-1356 2701-1357 2701-1358 2701-1359 BLACK XS S M L XL 2XL 3XL 4XL SZ CANVAS TECH-AIR® 3 SYSTEM PRICE: $ 829.95 SIZE: XS - 4XL
17 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 of not less than five seconds after the activation. Impact protective garment 17092 Class C (outer garment), with the outershell constructed from water resistant material. Performance tested according to DOLOMITICERT S.c.a.r.l. M.115.001 Protocol for Airbag Protectors Rev.4_14 10 2018. TECH SPEC Equipped with a central zipper to provide complete front chest coverage while also concealing the inner airbag. The internal magnetic snap button closure has been designed for ease of use and can be closed when riding or folded open when not riding. Strategically positioned stretch panels on both sides of the abdomen to accommodate the expansion of the airbag in the event of a crash. Perforated back zone for improved breathability, with internal air channels for enhanced airflow. Integrated back protector pocket on the back to house additional passive back protection. The argon gas canister that provides the inflation gas for the airbag’s deployment is housed in an ergonomic case on the right side of the lower back of the rider. Tech-Air®’s ECU seal-protection ensures all-weather performance and is certified to function between -20°C and +40°C. The canister housing, electronic wiring, and the airbag are easily removable. The canister can be replaced by ANY Alpinestars dealer. Ribbed ‘bomber’ style collar allows the system to be worn over any jacket. Two zippered hand pockets, two chest pockets and inner pockets, with a channel for sunglasses on the right chest pocket and a waist loop for attaching gloves for real-world practicality. The vest is washable. Chassis is constructed with a water resistant treatment for effective all-weather performance. Packable design means the system can be stored in a backpack or under a bike’s seat when not in use. Waist loop for attaching gloves. Also available in a Stella version, complete with an ergonomically engineered women’s optimized fit. The Argon inflator cartridge is CE certified to ISO26263, confirming compliance with the safety standard and certifying that the cartridges can be safely handled and serviced.
18 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 2701-1391 2701-1392 2701-1393 2701-1394 2701-1395 2701-1396 BLACK XS S M L XL 2XL SZ TECH-AIR® 7X SYSTEM PRICE: $ 1299.95 SIZE: XS - 2XL DESCRIPTION Tech-Air® 7x System is equipped with two Riding Modes, RACE and STREET, which have specific AI crash detection algorithms that can be easily selected via the Tech-Air® App. Tech-Air® 7x System is engineered to be worn under any Alpinestars Tech-Air® Ready or Tech-Air® Compatible leather suits or jackets, or any third-party leather suit with 4 cm of space around the circumference of the rider’s chest. The additional space for the chest is necessary to be able to accommodate the inflation of the Airbag in the event of a deployment. In addition, the leather suit should not be too tight in the crotch area, to prevent discomfort in the event of deployment. Tech-Air® 7x System is designed to be quickly and easily attached to Tech-Air® Compatible race suits or jackets for increased practicality and enhanced comfort. Tech-Air® 7x System is equipped with a convertor kit, allowing it to also be worn as a standalone Airbag System for real-world versatility. The Tech-Air® 7x System features dual charge capability, which means that with two full gas inflators, the System provides two separate Airbag deployments. Only one gas inflator will deploy to inflate the entire Airbag System during a crash scenario. A quick-release cover opening allows for rapid gas inflator replacement by users, only available in countries where gas inflator replacement by individuals is permitted by local regulations. The Tech-Air® 7x System uses an integrated, certified lithium-ion battery, with a fully charged battery life of approximately 20 hours of active ride time, and a recharge time of approximately 4 hours; charging the battery for approximately 1 hour will provide approximately 7 to 8 hours of riding time. Ease of use; to turn on the Tech-Air® 7x System, simply close the Front Flap, taking care to correctly attach the hook and loop patches. An internal magnetic switch will detect the Front Flap is closed and the System will automatically turn on and activate the Airbag System. To deactivate the Airbag, open the Front Flap and it will automatically turn off. The Tech-Air® 7x System’s base layer can be handwashed separately, after the removal of the non-washable parts that include the Airbag, Gas Inflators, and ALL the electronic components, including the LED Display, and the wiring. 2701-14123 REPLACEMENT TECH AIR INFLATORS
19 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 KEY FEATURES Tech-Air® 7x System is equipped with two Riding Modes, RACE and STREET, which have specific AI crash detection algorithms that can be easily selected via the Tech-Air® App. Tech-Air® 7x System is engineered to be worn under any Alpinestars Tech-Air® Ready or Tech-Air® Compatible leather suits or jackets, or any third-party leather suit with 4 cm of space around the circumference of the rider’s chest. The additional space for the chest is necessary to be able to accommodate the inflation of the Airbag in the event of a deployment. In addition, the leather suit should not be too tight in the crotch area, to prevent discomfort in the event of deployment. Tech-Air® 7x System is designed to be quickly and easily attached to Tech-Air® Compatible race suits or jackets for increased practicality and enhanced comfort. Tech-Air® 7x System is equipped with a convertor kit, allowing it to also be worn as a standalone Airbag System for real-world versatility. The Tech-Air® 7x System features dual charge capability, which means that with two full gas inflators, the System provides two separate Airbag deployments. Only one gas inflator will deploy to inflate the entire Airbag System during a crash scenario. A quick-release cover opening allows for rapid gas inflator replacement by users, only available in countries where gas inflator replacement by individuals is permitted by local regulations. The Tech-Air® 7x System uses an integrated, certified lithium-ion battery, with a fully charged battery life of approximately 20 hours of active ride time, and a recharge time of approximately 4 hours; charging the battery for approximately 1 hour will provide approximately 7 to 8 hours of riding time. Ease of use; to turn on the Tech-Air® 7x System, simply close the Front Flap, taking care to correctly attach the hook and loop patches. An internal magnetic switch will detect the Front Flap is closed and the System will automatically turn on and activate the Airbag System. To deactivate the Airbag, open the Front Flap and it will automatically turn off. The Tech-Air® 7x System’s base layer can be handwashed separately, after the removal of the non-washable parts that include the Airbag, Gas Inflators, and ALL the electronic components, including the LED Display, and the wiring. PROTECTION The Tech-Air® 7x System is compatible with all FIM Grand Prix Requirements for Airbag Systems, making it suitable for road racing competitions. The Tech-Air® 7x System features the latest evolution of Alpinestars Tech-Air® technology, including a more compact and complete active electronic System that is equipped with 12 sensors. There are 4 tri-axial sensors: 1 tri-axial accelerometer and 1 tri-axial gyroscope located on the main electronic control unit, and 2 additional tri-axial accelerometers located on the shoulders, specifically developed for track and performance riding, and these combine with the Tech-Air® algorithm to accurately monitor when to deploy the Airbag in the event of a crash. Upon the detection of a crash situation, a protective Airbag is deployed, providing unrivaled protection to the rider with a maximum inflation time of 44ms depending on the Airbag size. The Airbag has been fully certified for up to 4 Airbag deployments before having to replace it, providing the Airbag hasn’t been damaged in one of the first 3 deployments. This Airbag System is certified as a Category II PPE (Personal Protective Equipment) under European Regulation (EU) 2016/425. Certifications of the Airbag System covered by Dolomiticert’s guidelines for inflatable protectors with electronic activation: Airbag System Central Back inflatable protector, Level 2, EN 1621-4:2018 STREET and RACE Algorithms performance Additional Tech-Air® 7x System Certifications: Protective garment, Class C, EN 17092-6:2020 Integrated Passive Central Back, Level 1, EN 1621-2:2014 Tech-Air® 7x System is certified as an undergarment, to be used in combination with and under a protective garment. The integrated back protector is extended for protection of the coccyx.
20 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 2701-1290 2701-1291 2701-1292 2701-1293 2701-1294 2701-1423 BLACK S M L XL 2XL SZ TECH-AIR® OFFROAD AIRBAG SYSTEM Tech-Air® Off-Road is an FIM homologated airbag system designed specifically to handle the rigors of Rally riding while offering unrivalled upper body protection. Developed and tested in the most grueling conditions such as the Dakar, the TechAir® Off-Road System combines Alpinestars’ Bionic Pro Protection Jacket with Tech-Air® technology and a Rally-dedicated crash detection algorithm to deliver proven, off-road specific protection to the back, chest, shoulders, collarbones and neck. Although tough enough to tackle the world’s toughest rallies, this system has three riding modes, RALLY, ENDURO and STREET, making it the perfect choice for tackling every type of off-road riding, whatever the terrain. 1. Proven to be more than twice as protective as passive impact protectors. 2. Dual inflators deliver two deployments for guaranteed protection 3. Average inflation time of just 50 milliseconds (40ms for the smaller sizes and up to a max of 60ms for the largest 2XL). 4. Increased airbag coverage on back, shoulders, chest and ribs for complete upper body protection. 5. Neck protection is provided by the airbag inflating around the neck. 6. The integrated Nucleon CELL Back Protector is light, flexible and highly ventilated for enhanced performance, and features an ergonomic plate construction for structural strength and a fit to follow the natural contours of the back. 7. The Tech-Air® Off-Road System is Category II CE Certified to the 686/89/ EEC European PPE Directive, using a version of EN1621- 4:2013, which guarantees impact protection performance from within 25 milliseconds to 5 seconds of full pressure inflation. 8. Neck protectors are NOT compatible with the TechAir® Off-Road System. Premium materials combined with innovative design create a protector that is light, ergonomic and robust. Constructed from a breathable stretch mesh for superior ventilation while keeping the protection close to the rider’s body. Slim fit stretchable fabric construction features a floating, highly ventilated and flexible thermoformed chest protector for an optimal riding experience. CE Certified passive protectors for additional protection against impacts in key areas. Central front zipper for a better fit and ease of use. Additional front padding on the arms and chest for enhanced roost protection. Height adjustable kidney belt for an optimal fit. Ergonomic design delivers exceptional rider comfort and freedom of movement. Water bladder compatible: back holder for Hydration pack already included. PRICE: $ 1249.95 SIZE: S - 2XL REPLACEMENT TECH AIR 2X INFLATORS
21 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025
22 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 DESCRIPTION Optimized for trackday riders, racers and advanced road riders, the GP-R7 1pc Leather Suit is optimized for performance riding, on the road or the track, and is constructed using from premium Race grade 1.3mm bovine leather for superior abrasion resistance, flexibility and comfort. With a race fit and extensive perforations for maximum airflow, this suit also incorporates a streamlined speed hump specifically engineered to complement Alpinestars Supertech R10 helmet for optimum aerodynamic performance. It’s supremely protective too, thanks to its Nucleon PLASMA Pro armor. KEY FEATURES 1.3mm ‘Race’ spec soft bovine leather construction incorporating dual layers in critical areas for optimized flexibility and abrasion resistance. Equipped with Alpinestars Nucleon PLASMA Pro CE Level 2 armor. Unique to Alpinestars, PLASMA is an eco-friendly, sustainable and lightweight impact absorbing material, while its innovative design delivers classleading levels of adaptability, breathability, and ventilation. Anatomically optimized specifically for this suit, these ultra-adaptive protectors deliver the optimum balance of force dispersion, flexibility and comfort. Incorporates Alpinestars ‘Race’ spec Supertech R10 aero hump. Designed and engineered to work in conjunction with Alpinestars Supertech R10 helmet for optimum streamlining and aerodynamic performance with rider tucked in a racing crouch. Optimized for use with Alpinestars Tech-Air® Airbag Systems; Tech-Air® 5, Tech-Air® 10 and is Tech-Air® Compatible with the new Tech-Air® 7x Airbag System. Ultra-vented design with extensive perforations across the full torso and thighs, with perforated leather panels and localized perforations on the arms for maximum airflow, ventilation, and breathability. Pre-curved arms, legs and body, with extended multidirectional leather accordions at the shoulder blades, lower back, and knees for an enhanced ‘Race Fit’. Kevlar® grip zone is strategically positioned on the inside of the knee for optimal feel and contact with the bike’s tank. Kevlar® is a trademark of affiliates of DuPont de Nemours, Inc. used under license by Alpinestars S.p.A. PRICE: $ 1749.95 GP-R7 1PC LEATHER SUIT
23 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 PROTECTION CE Level 2 Nucleon PLASMA Pro armor on the elbows, shoulders, knees and shins; eco-friendly and sustainable, this ultra-soft impact absorbing material is a blend of bio-based materials and high-performance polyurethane for superb adaptability and an enhanced performance fit, while still being highly ventilated for superior airflow and breathability. The Nucleon PLASMA Pro Knee Protector features an extended design and has been developed using state-ofthe-art body mapping technology to achieve the optimum protection coverage to flexibility ratio and is specifically anatomically engineered for compatibility with this suit. Plasma armor is available in three different sizes for a precise fit. This suit can also accommodate the CE Level Nucleon PLASMA Race Chest and Level 2 Full Back protectors, both available as optional accessory upgrades. Dual density integrated GP DFS shoulder and knee armor, with a DFS RR Elbow slider with replaceable insert, for superior friction control. The GP-R 7 Suit is Tech-Air® Compatible with the new Tech-Air® 7x Airbag System and has been specifically designed to accommodate a Tech-Air® 7x Wired LED Display (available as an optional accessory) and is also equipped with a Tech-Air® 10 Bluetooth display pocket. Fully CE-certified riding garment to CE - Category II EN 17092-2:2020 - AAA class. TECH SPECS Seamless cuff and collar construction with suede and padded PU for superior rider comfort. Bicep zone features a special layering design for improved aerodynamic performance and comfort. The suit is equipped with an internal suspender system for ‘off the bike’ upper suit holding for comfort when waiting in the paddock between track sessions. Replaceable GP Knee Sliders are constructed using an exclusive PU compound to deliver exceptional feel and enhanced durability. Zippered detachable comfort liner for convenience. COMFORT Internal suspenders for off the bike upper suit holding - time off paddock standing. New seamless cuff and collar made out suede and padded PU for ultimate comfort. Extended multidirectional leather accordion at shoulder blades, lower back, and knees. Ergonomic HRSF Stretch inserts at crotch, back leg and inner arms Hyper Resistant Stretch Fabric; a stretch fabric with high abrasion and tear resistance. Detachable comfort liner. SIZE 48 50 52 54 56 58 60 SIZE 46 48 50 52 54 56 58 60 62 SIZE 48 50 52 54 56 58 60 BLACK WHITE RED FLUO 2801-1618 2801-1593 2801-1594 2801-1595 2801-1596 2801-1597 2801-1598 2801-1599 2801-1600 WHITE BLACK RED 2801-1601 2801-1602 2801-1603 2801-1604 2801-1605 2801-1606 2801-1607 BLACK RED 2801-1617 2801-1610 2801-1611 2801-1612 2801-1613 2801-1614 2801-1615
24 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 48 50 52 54 56 58 60 2810-4064 2810-4065 2810-4066 2810-4067 2810-4068 2810-4069 2810-4070 2810-4057 2810-4058 2810-4059 2810-4060 2810-4061 2810-4062 2810-4063 BLACK BLACK WHITE SZ ATEM V5 LEATHER JACKET The Atem v5 Leather Jacket is a racing jacket engineered and optimized for sportsbike and naked sportsbike riders, and features extensive racederived features, technology and materials including a dedicated ‘Race’ fit with pre-curved arms maximum riding performance, Alpinestars Flex Plus ‘Race’ leather throughout, race-proven protection on the shoulders and elbows, while delivering optimum levels of rider comfort. Alpinestars composite stretch technology, A-CS® Plus, stretch panels on the torso for exceptional breathability, comfort, and freedom of movement, as well as delivering a lighter weight and a lower profile than a traditional leather accordion panel (the A-CS® Plus panels are about nine percent lighter than leather panels). Another key advantage of using A-CS® Plus is its superior stretch performance; A-CS® Plus has about 30 percent elongation, and offers an increase in tear resistance of 300 percent compared to HRSF (Hyper Resistant Stretch Fiber), and an increase in cut resistance by 600 percent versus leather. RIDEKNIT® engineered inner arms; RIDEKNIT® combines high abrasion and tear resistance with high flexibility, comfort and mechanical stretch while still delivering superior comfort and high levels of breathability. Flex Plus bovine ‘Race’ leather construction is 10 percent lighter than regular bovine leather, while delivering 80 percent more adaptability for superior freedom of movement, an ultra-adaptive race fit, and enhanced abrasion and tear resistance. Extensive technical stretch panels under the arms, on the inner arms, and around the neck for an optimized fit. 3D pattern body mapping for an enhanced ‘race’ fit. Dual density DFS RR shoulder and elbow protectors for superior friction control. GP elbow armor for additional impact protection in a key area. Nucleon Flex Plus shoulder armor for superior impact protection. Tech-Air® 5 and Tech-Air® 3 Ready. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II EN17092-3: 2020 standard – AA class. Hook and loop neck closure with the large built-in flap for a secure closure. Ergonomic hook and loop cuffs with a zippered sleeve on the forearm for ease of use. Streamlined speed hump for enhanced aerodynamic performance and enhanced ventilation. Hump is equipped with a chamber to accommodate hydration pouch. Low profile sports collar construction for superior rider comfort and enhanced aerodynamic performance. Waterproof inner compartment for the safe and secure storage of valuables. Two zippered external side pockets for practical and secure storage. Mesh interior comfort liner with pockets to accommodate a back protector or a split chest protector. Cut longer on the back for greater coverage in the riding position. 3/4 waist zip for a secure connection with Alpinestars pants. PRICE: $ 899.95 SIZE: 48 - 60
25 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 PRICE: $ 699.95 SIZE: 48 - 60 BLACK RED 2810-4050 2810-4051 2810-4052 2810-4110 2810-4111 2810-4054 2810-4056 SIZE 48 50 52 54 56 58 60 BLACK BLACK 2810-4124 2810-4125 2810-4126 2810-4127 2810-4128 2810-4129 2810-4130 GP PLUS R V4 AIRFLOW JACKET The GP Plus R v4 Airflow Jacket is engineered and optimized for maximum ventilation and airflow and features extensive race-derived features and materials including a dedicated ‘Sport’ fit with pre-curved arms for maximum riding performance, and race-proven protection on the shoulders and elbows. Vented shoulders and extensive perforation zones on the chest and sides for maximum airflow. Alpinestars composite stretch technology, A-CS® Plus, stretch panels on the torso for exceptional breathability, comfort, and freedom of movement, as well as delivering a lighter weight and a lower profile than a traditional leather accordion panel (the A-CS® Plus panels are about 9% lighter than leather panels). Another key advantage of using A-CS® Plus is its superior stretch performance; A-CS® Plus has about 30% elongation and offers an increase in tear resistance of 300% compared to HRSF (Hyper Resistant Stretch Fiber), and an increase in cut resistance by 600% versus leather. 1.3mm ‘Race’ grade leather construction for the optimum blend of abrasion resistance and comfort. Extensive technical stretch panels under the arms, on the inner arms, and around the neck for an optimized fit. 1. Dual density DFS shoulders for superior friction control. 2. GP Lite elbow armor for additional impact and friction control in a key area. 3. Nucleon Flex Plus shoulder armor for superior impact protection. 4. Tech-Air® 5 and Tech-Air® 3 Ready. 5. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II EN170923:2020 standard – AA Class. Stretch under the arms and on the inner arms for an optimized sport fit. Stretch, soft feel, and ergonomic collar for superior rider comfort. Hook and loop neck closure with the large built-in flap for a secure closure. Ergonomic hook and loop cuffs with a zippered sleeve on the forearm for ease of use. Two zippered external side pockets for practical and secure storage. Mesh interior comfort liner with pockets to accommodate a back protector or a split chest protector. Cut longer on the back for greater coverage in the riding position. 3/4 waist zip for a secure connection with Alpinestars pants. Hook and Loop adjustable waist for an optimized fit. Mesh liner for optimized rider comfort.
26
APPAREL ALPINESTARS 27
28
APPAREL ALPINESTARS 29
30 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 The Blacktrack Leather Jacket is Alpinestars modern interpretation of the classic biker jacket, and combines premium leather and a tailored fit to create a jacket that looks great, on and off the bike, in any setting. This jacket is also equipped with a detachable thermal vest, which adds to its performance and versatility. Constructed from 1.0-1.2mm bovine leather for the optimum blend of light weight, thinness, suppleness and abrasion resistance. The leather is dip dyed, and the oils used during this process results in a more natural finish with superior overall softness and a softer feeling against the skin. Detachable thermal vest with 80g insulation at the front for effective cold weather performance. Nucleon Flex Plus CE Level 1 rated shoulder and elbow armor for superior impact protection. Shoulder and elbow armor protectors are engineered with a low profile for a more tailored fit. Low profile elbow protectors for a more stripped back and elegant aesthetic. Tech-Air® 3 Ready. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II EN170924: 2020 standard – A class. Integrated metallic gunmetal zip and metallic shoulder badge and trim for a premium finish. Leather accordion panels on the shoulder blades for an enhanced rider fit and optimum freedom of movement. Ventilation channels located on the rear area of the biceps for enhanced airflow. Perforated leather collar for additional airflow. Button and zip closure on the front, and button closures on the neck and wrist for a secure closure. Adjustable waist with buttons for an optimized fit. Zippered side pockets for real-world practicality. Loops for a secure attachment to Alpinestars riding pants. Mesh liner for superior rider comfort. Internal waterproof compartment for safe and secure storage of valuables. BLACKTRACK LEATHER JACKET S M L XL 2XL 3XL 4XL 2810-4093 2810-4094 2810-4095 2810-4096 2810-4098 2810-4099 2810-4100 BLACK BLACK SZ PRICE: $ 639.95 SIZE: S-4XL
31 APPAREL ALPINESTARS FALL INTRO COLLECTION 2025 PRICE: $ 699.95 SIZE: S-4XL The Dyno Leather Jacket is Alpinestars modern interpretation of a heritage jacket, and combines premium leather and a regular fit to create a jacket that looks great, on and off the bike, in any setting. This jacket is also equipped with a detachable thermal vest, which adds to its performance and versatility. Constructed from 1.0-1.2mm bovine leather for the optimum blend of light weight, thinness, suppleness and abrasion resistance. The leather is dip dyed, and the oils used during this process results in a more natural finish with superior overall softness and a softer feeling against the skin. Detachable thermal vest with 80g insulation at the front for effective cold weather performance. Nucleon Flex Plus CE Level 1 rated shoulder and elbow armor for superior impact protection. Shoulder and elbow armor protectors are engineered with a low profile for a more tailored fit. Low profile elbow protectors for a more stripped back and elegant aesthetic. Tech-Air® 3 Ready. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II EN170924: 2020 standard – A class. DYNO LEATHER JACKET 2810-4101 2810-4102 2810-4103 2810-4104 2810-4105 2810-4106 2810-4107 S M L XL 2XL 3XL 4XL 2810-4043 2810-4044 2810-4045 2810-4108 2810-4109 2810-4048 2810-4049 BLACK RUBY RED ECRU BLACK BLACK SZ
RkJQdWJsaXNoZXIy NDI5NTY=