2025
The 2025 Parts Canada ATV/UTV catalogue is the #1 resource for ATV/UTV enthusiasts. It has the parts and accessories they want for their hard-working farm/ranch machines, riding the dunes, exploring the trails or setting out on the next great hunt. All products we stock are backed with the latest technical information and fitment updates. For tires, tools and service items, see the 2025 Parts Canada/Drag Specialties Tire & Service catalogue. For riding gear, helmets and casual apparel, see the 2025 Parts Canada/ Drag Specialties Helmet & Apparel catalogue. We continue to add new products throughout the year. Be sure to check out partscanada.com for the latest parts, accessories and gear from Parts Canada. Parts Canada – Supporting the dealer, the customer and the entire sport! All model designations and applications used herein are determined by the manufacturers as USA/Canada-specific. Contact the individual manufacturer for additional international model information. 2 Get More From The Outdoors WE SUPPORT THE SPORT®
3 Exhaust..................... 7-29 Plows & Implements............ 30-85 Winches & Mounts............ 86-118 Audio/Communication & Mounts.. . . 119-187 General Accessories........... 188-195 Racks & Accessories.......... 196-203 Trunks, Luggage & Storage.. . . . . 204-214 Body.................... 215-235 Armor....................236-246 Handlebars & Controls......... 247-293 Wheel Accessories........... 294-332 Brakes................... 333-404 Belts, Chains & Sprockets.. . . . . . 405-445 Drivetrain................. 446-578 Suspension & Steering. ....... 579-615 Piston & Piston Kits...........616-622 Engine & Cooling............ 623-667 Gaskets & Seals............. 668-674 Clutch & Clutch Kits.......... 675-690 Fuel/Air Systems. ........... 691-743 Electrical................. 744-795 Lighting.................. 796-833 Hardware & Merchandising.. . . . . 834-844 Cross Reference............. 845-858 Index.................... 859-877 Table Of Contents WE SUPPORT THE SPORT®
4 IMPORTANT INFORMATION: EMISSIONS REGULATIONS NOTE: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emissions-related part(s) that alter the performance of OEM emissions-related devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information. More California exhaust information is available at www.arb.ca.gov/. NOTE: Parts designated as “Race Only” are for use only on vehicles used for competition racing and are not for use on vehicles registered for use on public roads. Sale and/or installation of “Race Only” parts in any way inconsistent with this warning is prohibited and may result in enforcement by the U.S. EPA under the federal Clean Air Act. “RACE ONLY” PARTS ARE NOT LEGAL FOR SALE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. NOTE: Aftermarket products, including but not limited to exhausts, catalytic converters, oxygen sensors, fuel/air controller modules, air filter kits, camshafts, O2 eliminators, and carburetors and jet kits which alter, modify, or replace emission control devices or systems of an originally compliant highway motorcycle, are not legal for sale or street use in California unless they have been issued a CARB Executive Order. Aftermarket emissions-related products which have not been issued an Executive Order or which are not aftermarket Replacement Parts, as defined in Title 13, California Code of Regulations, Section 1900(b)(2), are authorized for closed circuit race use only. Products shown may be designed, manufactured, intended and sold for closed circuit race use only and use of the same on public roads or lands may be a violation of local, state and/or federal laws. See manufacturer’s information and state and local laws to determine what is authorized for your use on your vehicle. The following emissions-related defined terms are used in this catalogue (PARTS WITH THE FOLLOWING DESIGNATIONS IN THIS CATALOGUE ARE NOT ILLEGAL FOR SALE IN CALIFORNIA UNDER CARB REGULATIONS): • “CARB E.O.” means the specified Executive Order issued by CARB. An Executive Order constitutes an exemption by CARB from CA Vehicle Code 27156 and 38391, for sale of the part number for the make/model/year fitment(s) specified in the Executive Order. • “Replacement Part” means any aftermarket part intended to replace an original equipment emissions-related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part. • “Qualified Manufacturer Declared Replacement Part” means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised. In addition, for 49-State compliance, the following term applies: • “Qualified Manufacturer Declared 49-State Federal Emissions Compliant Part” (Not legal for sale or use in California) means any aftermarket part intended to replace an original equipment emissions-related part and that meets all EPA emission regulations by installing the element of design in all emissions-related respects to the certified configuration of the vehicle, engine, or piece of equipment. This manufacturer has declared in writing that it has fully documented the emissions testing of an appropriate test vehicle, engine, or piece of equipment that had been identically altered and that the part meets all applicable emissions standards for that make/model/year fitment(s) advertised.
5 IMPORTANT INFORMATION: EMISSIONS PRODUCT CATEGORIZATION This catalog implements use of a categorization system developed by SEMA to identify emission products’ classifications and any corresponding restrictions on sales of those products. The products will be identified as fitting one of the following categories, as determined by the vendor/manufacturer. The categorization system is set forth below. The applicable product classification is displayed under the “EMIS” column in the catalog. Category Meaning Sales Restrictions 1 This Product is covered under a CARB EO and is legal for sale and use in all 50 states. See “CARB EO” definition on page 4. No USA Territory Restrictions. 2 This product is covered under a SEMA Certified Emissions certification or has otherwise met the requirements of the EPA’s Tampering Policy and is legal for sale in states that do not mandate an EO. See “Qualified Manufacturer Declared 49-State Federal Emissions Compliant Part” definition on page 4. Blocked from sales into California. 3 This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-pollution-controlled vehicles only. See “Race Only” Note on page 4. *Products for which vendors did not supply classification information are by default coded as “3.” Blocked from sales in ALL states unless dealer signs acknowledgment of dealer’s obligation to ensure sales or installation of such parts are on “Competition Use” only vehicles and not for highway use. 4 This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. See “Qualified Manufacturer Declared Replacement Part”definition on page 4. No USA Territory Restrictions. N/A Product not subject to emissions control regulations. No USA Territory Restrictions SEMA CATEGORIZATION LABELS
6 IMPORTANT INFORMATION: SALES OF RACE ONLY PARTS The federal Environmental Protection Agency’s policies related to tampering and defeat devices are publicly available at the following sites: https://www.epa.gov/sites/production/files/2020-12/documents/ epatamperingpolicy-enforcementpolicyonvehicleandenginetampering.pdf https://www.epa.gov/sites/production/files/2020-12/documents/ tamperinganddefeatdevices-enfalert.pdf https://www.epa.gov/sites/production/files/2021-01/ documents/caatitleiivehicleenginepenaltypolicy011821.pdf The EPA has taken civil and criminal enforcement action against companies and individuals for violations of the Clean Air Act’s tampering and defeat device prohibitions. By ordering “Race Only” parts from LeMans Corporation, d/b/a Parts Unlimited® and Drag Specialties® (“LeMans”), you as the selling retailer expressly acknowledges and assumes all the responsibility for ensuring and documenting information to verify that the sale or installation of every “Race Only” part is for competition racing vehicle use only. Examples of such documentation include: • Require that the buyer of the part(s) sign an acknowledgement that the part is for “Race Use Only.” The acknowledgement would contain enough information (i.e., invoice number, purchase date, purchaser name, part number, etc.) to be able to track the part to its ultimate installation. • Evidence that the vehicle is not registered in any State for highway use. • The detailed owner or operator information and vehicle VIN are recorded. • The vehicle is being used in only closed course competition events like King of the Baggers®, BRL Bagger Racing League®, SUPPER HOOLIGAN®, AMA FLAT TRACK®, or one of the hundreds of similar competition racing use only events throughout the US (road race, flat track, drag racing and land speed). If you have questions regarding the information that you should collect as evidence that the part purchased from LeMans and sold or installed by you/your company will be used only on a “Race Only” vehicle as intended, please refer to your legal counsel or racing trade association. This notice is a material condition of LeMans’ willingness to sell the product to you. By accepting the terms: 1. You are solely responsible to verify and document that use of “Race Only” parts will be limited to competition racing use consistent with the terms of this notice on each individual sales transaction; 2. You will provide LeMans with copies of the documentation that shows evidence of the use of “Race Only” parts purchased from LeMans upon request; and 3. You consent to the disclosure of your identity to any governmental entity responsible for regulating emissions and/or enforcing emissions laws, if requested. NOISE REGULATIONS A number of jurisdictions/states have exhaust noise laws. Exhaust products advertised might not be legal for sale or use on highway vehicles in such jurisdictions/states. Check applicable laws and regulations.
7 EXHAUST Vance&Hines......................... 8 TrinityRacing.......................... 9 FMF. ............................ 10-12 ProCircuit............................12 Yoshimura............................13 HMF............................. 14-22 S&S................................23 Kolpin...............................24 Heat Shields/Pipe Armor. . . . . . . . . . . . . . . . . . 24 Muffler Repack Kits. . . . . . . . . . . . . . 11-12, 25-27 Exhaust Springs/Rivet Kits/ Wash Plugs/Pipe Wrap.. . . . 8, 11-12, 24-25, 27-29
BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | ATV/UTV EXHAUST EXHAUST 8 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. COMPETITION SERIES SLIP-ON MUFFLER FOR YAMAHA YXZ1000R 16-22 •304 stainless steel construction • Hand TIG-welded 4” stepped muffler •Double slip joints •CNC-machined billet end cap •Laser engraved logo •CNC-machined billet aluminum muffler mounting •Meets SAE J1287 sound standards •Accessory spark arrester available •Made in the U.S.A. MOJAVE ELIMINATOR •Manufactured from 404 stainless steel construction • 4” dual-top center exit •CNC-machined billet end caps •Laser-cut rear guard •Deeper exhaust note HEADER WRAP KIT • Features laser-cut Vance & Hines wrap clamps, black header wrap tape and locking stainless steel ties • Black, fiberglass composite wrap tape locks in heat and reduces the radiant heat by 50% •Kit will wrap two motorcycle headers thoroughly • Includes 2”W x 25’ L roll of black wrap tape, two Vance & Hines Wrap Clamps and six locking stainless steel ties •Made in the U.S.A. IMPORTANT NOTICE: Use of this Vance & Hines Header Wrap Kit (PART #1861-0622) may void all warranties of the exhaust system that this Kit is applied to. Header Wrap functions to insulate heat generated by exhaust gases flowing through the headpipe, thereby raising the headpipe temperature beyond its intended operating temperature. Using heat wrap may compromise the integrity of the headpipe material, and may ultimately lead to cracks in the headpipe and will not be covered under warranty. Use of header wrap on an exhaust system is a modification to and not a normal use of an exhaust system.This notice is intended to inform the buyer to consider this possibility before using this product. •Meets SAE J1287 sound standards •Includes SAE J350 compliant spark arresters •49-state emissions compliant •Mounts to factory header DESCRIPTION PART # EMIS* Slip-on muffler 1831-1050 3 FITS MODEL PART # EMIS* CAN-AM Maverick X3 17-22 1830-0621 3 HONDA Talon 19-22 1830-0622 3 FITS MODEL PART # EMIS* POLARIS RZR Pro XP 20-22 1830-0620 3 RZR Turbo R 22 1830-0620 3 DESCRIPTION PART # Header wrap kit 1861-0622 1830-0620
BOLD MAGENTA part numbers are new for 2025 EXHAUST PARTSCANADA.COM ATV/UTV | 2025 EXHAUST 9 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. STAGE 5 ALUMINUM EXHAUST SYSTEMS AND SLIP-ON MUFFLERS • Features fully TIG-welded 6061 aluminum dual mufflers, mounting brackets and exhaust tips •Includes oxygen sensor bung • U.S.F.S. approved spark arrestor •Significant horsepower and torque gains •Lightweight design •Made in the U.S.A. FULL EXHAUST SYSTEMS FITS MODEL EXHAUST TYPE FINISH PART # EMIS* CAN-AM Maverick X3/MAX Turbo/X DS Turbo R/X RS Turbo R/RR (all) 17-23 Dual system Cerakote® 1830-0617 3 HONDA Talon 1000R/X (all) 19-22 Full system Black 1830-0593 3 POLARIS RZR XP/XP 4 Turbo 16-21, RZR XP/XP 4 Turbo S 18-21 Dual system Cerakote 1830-0615 3 RZR Pro XP/XP 4 20-23, RZR Turbo R 4 22-23 Dual system Cerakote 1830-0619 3 RZR RS1 18-22 Dual System Cerakote 1830-0618 3 FITS MODEL EXHAUST TYPE FINISH PART # EMIS* POLARIS (CONT) RZR XP/XP 4 1000 14-23 Dual system Black 1830-0402 3 Dual system Cerakote 1830-0614 3 YAMAHA YXZ1000R/R SS/SS SE 16-23 Full system Black 1830-0404 3 Full system Brushed 1830-0403 3 Full system Cerakote w/ black header 1830-0445 3 Full system Cerakote w/ brushed header 1830-0616 3 SLIP-ON MUFFLERS FITS MODEL MUFFLER TYPE FINISH PART # EMIS* CAN-AM Maverick X3/MAX Turbo/X DS Turbo R/X RS Turbo R/RR (all) 17-23 Dual Black 1831-0715 3 Dual Cerakote® 1831-1017 3 HONDA Talon 1000R/X (all) 19-22 Single Brushed 1831-0964 3 POLARIS RZR XP/XP 4 Turbo 16-21, RZR XP/XP 4 Turbo S 18-21 Dual Cerakote 1831-1015 3 FITS MODEL MUFFLER TYPE FINISH PART # EMIS* POLARIS (CONT) RZR Pro XP/XP 4 20-23, RZR Turbo R 4 22-23 Dual Cerakote 1831-1020 3 RZR RS1 18-22 Dual Cerakote 1831-1018 3 YAMAHA YXZ1000R/R SS/SS SE 16-23 Single Black 1831-0686 3 Single Cerakote 1831-1016 3 DESCRIPTION PART # EMIS* Spark arrestor for end cap outlet bases that have “ear” tab cutouts 1860-1296 3 Stainless quiet core insert for end cap outlet bases that have “ear” tab cutouts 1860-1297 3 Long spring 1860-1288 N/A Short spring 1860-1289 N/A Spring clip 1860-1298 N/A STAGE 5 EXHAUST REPLACEMENT PARTS 1860-1288 1860-1289 1860-1296 1860-1297 1860-1298 1830-0445 1830-0615 1831-0715 1831-1017 1831-1018
BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | ATV/UTV EXHAUST EXHAUST 10 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. FACTORY 4.1™ SYSTEMS AND SLIP-ON MUFFLERS •Complete systems and slip-on mufflers •Systems feature titanium PowerBomb header and midpipe, except where noted •Slip-on mufflers available in natural titanium •Titanium slip-on mufflers include a stainless steel midpipe •The lightest mufflers and full systems available •Superior power and performance – horsepower improved throughout the rpm range •Feature exclusive proprietary Chamber Core and PowerBomb technology • Factory forward engineering centralizes mass, improves handling •Made from premium quality American materials •Customize with performance tuning inserts and spark arrestor module FITS MODEL DESCRIPTION PART # EMIS* YAMAHA YFZ450R 09-22, YFZ450X 10-11 Anodized titanium system, anodized muffler has carbon fiber end cap and MegaBomb stainless steel header 1830-0410 3 YFM700R Raptor 06-14 Natural titanium slip-on 1831-0359 3 FITS MODEL DESCRIPTION PART # EMIS* YAMAHA (CONT) YFM700R Raptor 15-23 Natural titanium system 1830-0390 3 Natural titanium slip-on 1831-0359 3 FITS MODEL PART # EMIS* HONDA TRX400EX 99-08,TRX400X 09-14 FMF0410251 3 YAMAHA YFM250 Raptor 08-15,YFM250R Raptor 11 1831-0402 3 FITS MODEL PART # EMIS* YAMAHA (CONT) YFZ450R 09-22,YFZ450X 10-11 1831-0517 3 YFM700 Raptor 06-23 1831-06472 3 1 PowerCore 4 SA. 2 PowerCore4 Hex. POWERCORE 4/4 SA MUFFLERS •Modular end cap allows easy tuning alterations • Standard Hi-Flo 2” end cap boosts all-around performance; optional smaller 1 3/4” end cap smooths power delivery; spark arrestor module adds off-road versatility •Computer-designed and dyno-tested for every 4-stroke application •Enhanced sonic evacuation delivers a higher flow of exhaust gases, which increases power •A stainless steel mid-pipe mates to the computer-designed aluminum rear can for lightweight durability •Square or round (depending on the machine) perforated steel inner cores make for optimum flow, using hi-flo technology •FMF’s exclusive cross-weave internal packing provides longevity and maximum sound dispersion FITS MODEL PART # EMIS* HONDA TRX400EX 99-08,TRX400X 09-14 FMF-H421H 3 YAMAHA YFZ450 04-09, 12-13 FMF044033 3 FITS MODEL PART # EMIS* YAMAHA (CONT) YFM700 Raptor 06-14 1832-0038 3 POWERBOMB HEADERS •Utilize module precisely located at the initial stage of the header for specific applications • Position “Bomb” increases performance; horsepower is increased as much as 10% • Act as “pre-muffler” helping to lower the decibel output •The expansion and contraction of exhaust sonics through the system causes increased flow •Available in stainless steel for strength combined with light weight •Elliptical aluminum can offers strategic sizing for superior performance •Optional Quiet Core insert will provide a decrease in sound level if desired •PowerCore 4 SA (spark arrestor) features a screen-type spark arrestor that is approved by the U.S.F.S. and does not interrupt exhaust flow so there’s no performance loss •The PowerCore 4 SA system’s strategic ports allow the sonics to evacuate more effectively with the computer-designed Performance Flow end cap FMF041025 1830-0410 1831-0359
BOLD MAGENTA part numbers are new for 2025 EXHAUST PARTSCANADA.COM ATV/UTV | 2025 EXHAUST 11 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # FACTORY 4.1 Spark arrestor 1861-0170 POWERCORE 2 1.0” repl. rear cone cap FMF020461 DESCRIPTION PART # HEAT SHIELD Universal stainless steel header heat shield 1861-0043 4-STROKE EXHAUST REPLACEMENT PARTS AND ACCESSORIES 1861-0043 1861-0170 DESCRIPTION PART # HONDA TRX250R FourTrax 86-89 FMF011385 DESCRIPTION PART # YAMAHA YFZ350 Banshee 87-06 FMF011319 PIPE SPRING/O-RING KITS •Available as listed DESCRIPTION PART # 4-stroke pillow muffler packing 1860-0828 4-STROKE PILLOW MUFFLER PACKING • Composed of fine, blended, interwoven fiberglass fibers •Made to conform to FMF’s high-heat-resistant specifications •Provides optimum performance and longevity •Prevents exhaust can from getting too hot, which can cause damage to the exhaust DESCRIPTION PART # 2-stroke FMF12-002 DESCRIPTION PART # 4-stroke FMF12-004 MUFFLER PACKING •Owens-Corning fiberglass replacement packing keeps silencers performing as they’re meant to FMF12-002 FMF011385
BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | ATV/UTV EXHAUST EXHAUST 12 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. EXHAUST REPLACEMENT PARTS • Quiet Tip inserts produce a more subdued exhaust note DESCRIPTION PART # Modular Quiet Tip for 3.5” canister 1861-0019 Spark arrestor screen 1861-0015 DESCRIPTION PART # 4-stroke replacement 14” x 4” muffler packing 520545 4-stroke replacement 16” x 3.5” muffler packing 520548 FITS MODEL DESCRIPTION PART # EMIS* YAMAHA YFS200 Blaster 88-06 Fatty pipe FMF-Y37 3 FITS MODEL DESCRIPTION PART # EMIS* YAMAHA (CONT) YFZ350 Banshee 87-06 Fatty pipe set (2 pc.) FMF-Y441 3 1 Must be used with FMF silencers. GOLD SERIES FATTY™ PIPES •Computer designed and dyno-tested to make power gains where each machine needs them the most •Tru-Flo stamping process ensures a perfect fit and optimum performance •Constructed of strong 19-gauge steel with a nickel-plated finish FITS MODEL PART # EMIS* YAMAHA YFS200 Blaster 88-06 FMF-8204 3 FITS MODEL PART # EMIS* YAMAHA (CONT) YFZ350 Banshee 87-06 (2-pc. set) FMF-82051 3 1 Must be used with FMF pipes. POWERCORE 2 SILENCERS •The most popular 2-stroke silencers in FMF’s arsenal •The elliptically shaped bodies with perforated core perform well in any condition •Equipped with a Performance Flow end cap and nickel-plated front stinger DESCRIPTION PART # 1.0” FMF020461 REPLACEMENT REAR CONE CAPS FOR POWERCORE 2 DESCRIPTION PART # 2-stroke Premier muffler packing 1860-0827 2-STROKE PREMIER MUFFLER PACKING •Features high-temperature-resistant fiberglass •Ideal for MX applications where maximum sound absorption is not a necessity 1861-0019 1861-0015
BOLD MAGENTA part numbers are new for 2025 EXHAUST PARTSCANADA.COM ATV/UTV | 2025 EXHAUST 13 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. EXHAUST SYSTEMS AND SLIP-ON MUFFLERS QUALITY SINCE 1954 • Every Yoshimura exhaust product is made by hand to the highest quality standards • Championship-winning racetrack experience and Yoshimura’s extensive R&D facility ensure these pipes perform •This dedication to research and development is only matched by Yoshimura’s dedication to uncompromising quality standards •True performance art for your ATV or UTV SIGNATURE SERIES EXHAUST •All Signature series exhaust are tested, documented and marked with appropriate EPA noise emissions labels •Do not require changing the ATV’s emissions control systems • CARB and EPA emissions “Replacement Parts” •Certified by independent laboratory for EPA noise levels RS-2 •Diamond-shape muffler canister design improves power output •Muffler shape increases durability and performance from muffler packing SLIP-ON MUFFLERS RS-5 •Undertail muffler; trapezoid-shape muffler sleeve •Muffler shape provides maximized internal exhaust flow volume • Straight, single-core baffle •Can accept low-volume sound insert EXHAUST SYSTEMS FITS MODEL SERIES TYPE HEADER/MUFFLER/END CAP TYPE PART # EMIS* HONDA TRX450R 06-14 Signature RS-2 Stainless/aluminum/aluminum 1830-0269 3 KAWASAKI KFX400 03-06 Signature RS-2 Stainless/aluminum/aluminum 1830-0295 3 YAMAHA YFZ450 04-09 Signature RS-2 Stainless/aluminum/aluminum 1830-0270 3 YFZ450R/X 09-16 Signature RS-2 Stainless/aluminum/aluminum 1830-0354 3 YFM700 Raptor 06-14 Signature RS-2 Stainless/aluminum/aluminum 1830-0271 3 YFM700 Raptor R/SE 15-23 Signature RS-2 Stainless/aluminum/stainless 1830-0395 3 SLIP-ON MUFFLERS FITS MODEL SERIES TYPE MID-PIPE/MUFFLER/END CAP TYPE PART # EMIS* KAWASAKI KFX400 03-06 Signature RS-2 Stainless/aluminum/aluminum slip-on 1831-0462 3 SUZUKI LT-Z400 03-14 Signature RS-2 Stainless/aluminum/aluminum slip-on 1831-0462 3 LT-R450 06-10 Signature RS-5 Titanium/aluminum/aluminum 1831-0618 3 YAMAHA YFZ450R/X 09-14 Signature RS-2 Stainless/aluminum/aluminum slip-on 1831-0513 3 YFM700 Raptor 06-23 Signature RS-2 Stainless/aluminum/aluminum slip-on 1831-0420 3
BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | ATV/UTV EXHAUST EXHAUST 14 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. EXHAUST SYSTEMS FITS MODEL MUFFLER STYLE DESCRIPTION FUEL TUNING PART # EMIS* ARCTIC CAT/TEXTRON Wildcat XX 18-24 Quiet QS Round stainless muffler w/ billet end cap (center mount) Not Required 1830-0561 3 Loud XL Round stainless muffler w/ billet end cap (center mount) Not Required 1830-0562 3 CAN-AM Outlander 500 13-15, Outlander 570 16, Outlander 650 13-22, Outlander 650 X mr 13-21, Outlander 800 12-15, Outlander 800 X mr 15, Outlander 850/X mr 16-22 Quiet QS Round stainless muffler w/ billet end cap (side mount) Required 1830-0511 3 Outlander 500 MAX 13-15, Outlander 570 MAX 16, Outlander 650 MAX 13-23, Outlander 800 MAX 13-15, Outlander 850 MAX 16-23 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1830-0516 3 TITAN SERIES 5” EXHAUST SYSTEMS AND SLIP-ON MUFFLERS •304 stainless steel system built to withstand extreme temperatures, increase torque and horsepower, add durability, resist corrosion and improve the overall exhaust tone •Quiet QS versions feature a mechanical core design that produces incredible horsepower while keeping the sound levels to a minimum •Loud XL versions feature an unrestricted internal core design that produces maximum horsepower at an incredibly loud volume NOTE: Fuel tuning required for certain models; please see chart. Failure to tune the engine can cause excessive damage to the exhaust system and engine. 1830-0500 1830-0496
BOLD MAGENTA part numbers are new for 2025 EXHAUST PARTSCANADA.COM ATV/UTV | 2025 EXHAUST 15 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. TITAN SERIES 5” EXHAUST SYSTEMS AND SLIP-ON MUFFLERS continued on next page. SLIP-ON MUFFLERS FITS MODEL MUFFLER STYLE DESCRIPTION FUEL TUNING PART # EMIS* ARCTIC CAT/TEXTRON Wildcat XX 18-24 Quiet QS Round stainless muffler w/ billet end cap (center mount) Not Required 1831-0906 3 Loud XL Round stainless muffler w/ billet end cap (center mount) Not Required 1831-0907 3 CAN-AM Outlander 500L 15, Outlander 570L 16, Outlander 570 17-22 Loud XL Round stainless muffler w/ billet end cap (center mount) Required 1831-0815 3 Outlander 500/650/800 08 Quiet QS Round stainless muffler w/ billet end cap (clamp mount) Required 1831-0810 3 Loud XL Round stainless muffler w/ billet end cap (clamp mount) Required 1831-0811 3 Outlander 500 09-12, Outlander 650 09-12, Outlander 800 09-11 Loud XL Round stainless muffler w/ billet end cap (clamp mount) Required 1831-0822 3 Renegade 500 08-12, Renegade 800 07-12 Loud XL Round stainless muffler w/ billet end cap (clamp mount) Required 1831-0822 3 Renegade 1000 12-25 Quiet QS Round stainless muffler w/ billet end cap (seat mount) Required 1831-0818 3 Outlander 1000 12-23 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1831-0805 3 Maverick Trail 1000 18-22 Quiet QS Round stainless muffler w/ billet recessed end cap (center mount) Required 1831-0793 3 Loud XL Round stainless muffler w/ billet recessed end cap (center mount) Required 1831-0794 3 HONDA TRX420 Rancher 09-13, TRX420 Rancher IRS 09-14, TRX500 Foreman 12-13 Quiet QS Round stainless muffler w/ billet end cap (side mount) Required 1831-0829 3 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1831-0830 3 TRX500 Foreman Rubicon 01-14, TRX500 Foreman 05-11 Quiet QS Round stainless muffler w/ billet end cap (side mount) Required 1831-0826 3 TRX650/680 Rincon 03-23 Quiet QS Round stainless muffler w/ billet end cap (side mount) Required 1831-0844 3 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1831-0845 3 Pioneer 700 14-21 Loud XL Round stainless muffler w/ billet end cap (side mount) Not Required 1831-0834 3 Pioneer 1000 16-24 Loud XL Round stainless muffler w/ billet end cap (center mount) Not Required 1831-0832 3 Talon 1000R/X 19-23, Talon X-4 20-23 Quiet QS Round stainless muffler w/ billet recessed end cap (center mount) Required 1831-0979 3 Loud XL Round stainless muffler w/ billet recessed end cap (center mount) Required 1831-0980 3 TITAN SERIES 5” EXHAUST SYSTEMS AND SLIP-ON MUFFLERS (CONT) FITS MODEL MUFFLER STYLE DESCRIPTION FUEL TUNING PART # EMIS* CAN-AM (CONT) Maverick X3/MAX (all) 17-25 Quiet QS Dual round gun metal mufflers w/ billet end caps (center mount; Dual Turbo Back) Required 1830-0495 3 Quiet QS Dual round gun metal mufflers w/ billet-blackout end caps (center mount; Dual Turbo Back) Required 1830-0496 3 Quiet QS Dual round stainless mufflers w/ billet end caps (center mount; Dual Turbo Back) Required 1830-0497 3 Quiet QS Dual round stainless mufflers w/ billet-blackout end caps (center mount; Dual Turbo Back) Required 1830-0498 3 Loud XL Dual round gun metal mufflers w/ billet-blackout end caps (center mount; Dual Turbo Back) Required 1830-0499 3 Loud XL Dual round stainless mufflers w/ billet end caps (center mount; Dual Turbo Back) Required 1830-0500 3 Maverick Trail 1000 18-22 Loud XL Round stainless muffler w/ billet recessed end cap (center mount) Required 1830-0504 3 Outlander 1000 12-24 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1830-0507 3 HONDA TRX420 Rancher SRA 14-25, TRX500/520 Foreman 14-25 Quiet QS Round stainless muffler w/ billet end cap (side mount) Required 1830-0523 3 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1830-0524 3 TRX420 Rancher IRS 15-24, TRX500/520 Foreman Rubicon 15-24 Quiet QS Round stainless muffler w/ billet end cap (side mount) Required 1830-0529 3 POLARIS Scrambler XP 850 12-16 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1830-0553 3 Scrambler XP 1000 14-18 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1830-0551 3 Sportsman XP 1000 15-24 (except Pursuit/Highlifter/Touring) Quiet QS Round gun metal muffler w/ billet-blackout end cap (center mount) Required 1830-0554 3 Loud XL Round stainless muffler w/ billet end cap (center mount) Required 1830-0557 3 Xpedition XP/XP 5/ADV/ADV 5 24-25 Quiet QS Dual round stainless Twin Loop mufflers w/ turn-down brushed end caps (center mount) Not required 1830-0663 3 EXHAUST SYSTEMS (CONT)
BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | ATV/UTV EXHAUST EXHAUST 16 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. FITS MODEL MUFFLER STYLE DESCRIPTION FUEL TUNING PART # EMIS* KAWASAKI Teryx 750 08-13 Quiet QS Round stainless muffler w/ billet end cap (side mount) Required 1831-0869 3 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1831-0870 3 Loud XL Round stainless muffler w/ billet-blackout end cap (side mount) Required 1831-0871 3 Teryx 800 14-25,Teryx4 750/800 12-25 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1831-0873 3 POLARIS Sportsman ETX 15, Sportsman 450 16-24, Sportsman 570 14-24 Quiet QS Round stainless muffler w/ billet end cap (side mount) Required 1831-0891 3 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1831-0892 3 Sportsman 850/SP 17-24 (except Touring/X2/XP/High Lifter) Quiet QS Round stainless muffler w/ billet end cap (center mount) Required 1831-0893 3 Quiet QS Round gun metal mufflers w/ billet-blackout end caps (center mount) Required 1831-0987 3 Loud XL Round stainless muffler w/ billet end cap (center mount) Required 1831-0894 3 Ranger XP 900/Crew 16-17, Ranger XP 1000/Crew 17 (except Northstar) Loud XL Round stainless muffler w/ billet recessed end cap (side mount) Required 1831-0880 3 RZR S 900/XC/Trail 15-20, RZR 4 900 15-18 Quiet QS Round stainless muffler w/ billet recessed end cap (center mount) Required 1831-0883 3 RZR XP/XP 4 Turbo 16-21, RZR XP/XP 4 Turbo S 18-21 Quiet QS Dual round stainless mufflers w/ billet recessed end caps (center mount) Required 1831-0784 3 Loud XL Dual round stainless mufflers w/ billet recessed end caps (center mount) Required 1831-0785 3 YAMAHA YFM450 Kodiak 18-25 Quiet QS Round stainless muffler w/ billet end cap (side mount) Required 1831-0933 3 Loud XL Round stainless muffler w/ billet end cap (side mount) Required 1830-0568 3 YFM550 Grizzly 08-14 Loud XL Round stainless muffler w/ billet recessed end cap (side mount) Required 1831-0972 3 Loud XL Round gun metal muffler w/ billet-blackout recessed end cap (side mount) Required 1831-0973 3 YFM700 Grizzly 07-13 Loud XL Round stainless muffler w/ billet recessed end cap (side mount) Required 1831-0972 3 Loud XL Round gun metal muffler w/ billet-blackout recessed end cap (side mount) Required 1831-0973 3 YFM700 Grizzly 14-25,YFM700 Kodiak 16-25 Quiet QS Round stainless muffler w/ billet recessed end cap (side mount) Required 1831-1084 3 YXM700 Viking/YXC700 Viking VI (all) 14-25 Quiet QS Round stainless muffler w/ billet recessed end cap (side mount) Not Required 1831-0941 3 Wolverine X2 850 19-25, Wolverine X4 850 18-25 Quiet QS Round stainless muffler w/ billet recessed end cap (center mount) Required 1831-0986 3 YXZ1000R/SS/SE/SS SE 16-25 Quiet QS Round stainless muffler w/ billet end cap (center mount) Required 1831-0960 3 Loud XL Round stainless muffler w/ billet end cap (center mount) Required 1831-0961 3 TITAN SERIES 5” EXHAUST SYSTEMS AND SLIP-ON MUFFLERS (CONT) SLIP-ON MUFFLERS (CONT) DESCRIPTION PART # EMIS* Blackout 1832-0091 3 TURBO FORWARD EXHAUST FOR CAN-AM MAVERICK TURBO 15-17 •Designed to increase horsepower and add reliability • Includes HMF Race-Up-Pipe, front headpipe, rear headpipe, front S-bend and support bracket •Includes replacement 304 stainless steel headpipes along with the HMF Race-Up-Pipe •Both the front headpipe and the HMF Race-Up-Pipe utilize turbo specific stainless steel flex joints •Also included is a bracket designed to take the weight of the turbo charger off the exhaust system to prevent exhaust parts failure •Front headpipe comes with a replacement heat shield •Both front and rear headpipes have oxygen sensor bungs welded into them to retain the factory sensors •Blackout finish
BOLD MAGENTA part numbers are new for 2025 EXHAUST PARTSCANADA.COM ATV/UTV | 2025 EXHAUST 17 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. EXHAUST SYSTEMS FITS MODEL DESCRIPTION FUEL TUNING PART # EMIS* CAN-AM Outlander 500/650/800 MAX 09-12 Round brushed muffler w/ Euro-polished end cap (clamp mount) Required 1830-0513 3 Outlander 500 MAX 13-15, Outlander 570 MAX 16, Outlander 650 MAX 13-23, Outlander 800 MAX 13-15, Outlander 850 MAX 16-23 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0514 3 Renegade 500 13-15, Renegade 570 16-22, Renegade 800 12-15, Renegade 850 16-22 Dual round brushed mufflers w/ Euro-polished end caps (seat mount) Required 1830-0482 3 Maverick X3/MAX (all) 17-25 Dual round brushed mufflers w/ Euro-polished end caps (center mount; Dual Turbo Back) Required 1830-0493 3 Dual round gun metal mufflers w/ Euro-blackout end caps (center mount; Dual Turbo Back) Required 1830-0494 3 Maverick 1000R/X/X ds 13-18, Maverick MAX 1000R/X ds 14-18 (except 1000R Turbo 15-18) Dual round brushed mufflers w/ Euro-polished end caps (center mount; 3/4 system) Required 1830-0478 3 Outlander 1000 12-24 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0505 3 Round gun metal muffler w/ Euro-blackout end cap (side mount) Required 1830-0506 3 PERFORMANCE SERIES 4” EXHAUST SYSTEMS AND SLIP-ON MUFFLERS •The Performance Series from HMF has been the staple of the brand since its origin • Whether on dirt or pavement, this exhaust system has the capability of generating an even increase in horsepower and torque while distributing an aggressive deep sound •Assembled on an durable 6063-T6 aluminum alloy shell, with magnesium and silicon as the alloying elements •Features a 2 1/8” unrestricted core that has a special hole pattern that allows the exhaust system to increase power evenly throughout the rpm range •High-temp powdercoat can be applied for a completely custom look NOTE: Fuel tuning required for certain models; please see chart. Failure to tune the engine can cause excessive damage to the exhaust system and engine. 1830-0494 1830-0493 PERFORMANCE SERIES 4” EXHAUST SYSTEMS AND SLIP-ON MUFFLERS continued on next page.
BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | ATV/UTV EXHAUST EXHAUST 18 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. FITS MODEL DESCRIPTION FUEL TUNING PART # EMIS* HONDA TRX90 06-24 Round brushed muffler w/ black Mini end cap (side mount) Not required 1830-0544 3 TRX250X/EX 11-24 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0532 3 Round gun metal muffler w/ Euro-blackout end cap (side mount) Required 1830-0533 3 TRX450R 04-05 Elliptical brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0538 3 TRX700XX 08-09 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0543 3 Talon 1000R/X 19-23,Talon 1000 X-4 20-23 Dual round brushed mufflers w/ Euro-polished end caps (side mount) Required 1830-0606 3 Dual round red mufflers w/ Euro-black end caps (side mount) Required 1830-0607 3 Dual round red mufflers w/ Euro-blackout end caps (side mount) Required 1830-0608 3 KAWASAKI KVF650 Brute Force 05-13, KVF650/750 Prairie 02-06 Round brushed muffler w/ Euro-polished end cap (side mount; 3/4 system) Required 1830-0471 3 KVF650i Brute Force IRS 05-13, KVF750 Brute Force 05-11 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0546 3 KVF750 Brute Force (all) 15-24 Round black muffler w/ Euro-black end cap (side mount; 3/4 system) Required 1830-0473 3 Round brushed muffler w/ Euro-polished end cap (side mount; 3/4 system) Required 1830-0474 3 POLARIS RZR 170 10-21 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0549 3 RZR XP/XP 4 Turbo/Turbo S 16-21 Dual round gun metal mufflers w/ Euro-blackout end caps (center mount; Dual Turbo Back) Required 1830-0502 3 RZR RS1 18-22 Dual round brushed mufflers w/ Euro-polished end caps (center mount) Required 1830-0484 3 Dual round red mufflers w/ Euro-blackout end caps (center mount) Required 1830-0485 3 RZR XP/XP 4 1000 15-23 Dual round gun metal mufflers w/ Euro-polished end caps (center mount) Required 1830-0491 3 Scrambler XP 1000 S 20-24 Dual round brushed mufflers w/ Euro-black end caps (center mount) Required 1830-0662 3 YAMAHA YFM90 Raptor 09-14 Round blue muffler w/ Mini end cap and spark arrester (side mount) Not required 1830-0578 3 YFM90 Raptor 16-22 Round blue muffler w/ Mini-blackout end cap and spark arrester (side mount) Not required 1830-0580 3 YFZ450 04-13 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0583 3 YFZ450R/X 09-25 Elliptical brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0586 3 Elliptical gun metal muffler w/ Euro-blackout end cap (side mount) Required 1830-0587 3 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0588 3 YFM660 Grizzly 02-08 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0563 3 YFM700 Grizzly (all) 14-25, YFM700 Kodiak (all) 16-25 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1830-0564 3 PERFORMANCE SERIES 4” EXHAUST SYSTEMS AND SLIP-ON MUFFLERS (CONT) SLIP-ON MUFFLERS FITS MODEL DESCRIPTION FUEL TUNING PART # EMIS* ARCTIC CAT/TEXTRON 400/500/650/700/1000 06-14 Round brushed muffler w/ turn-down brushed end cap (spring mount) Not required 1831-0786 3 DVX400 03-08 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0904 3 Round gun metal muffler w/ Euro-blackout end cap (side mount) Required 1831-0905 3 650 V-Twin 04-06 Round brushed muffler w/ turn-down brushed end cap (side mount) Required 1831-0787 3 CAN-AM Renegade 70 23-25, Renegade 110/X xc 23-25 Round black muffler w/ Mini end cap and spark arrester (side mount) Not required 1831-0876 3 Round Venom green muffler w/ Mini end cap and spark arrester (side mount) Not required 1831-0878 3 Outlander 400/MAX 09-15 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0806 3 Outlander 500/650/800 08 Round brushed muffler w/ Euro-polished end cap (clamp mount) Required 1831-0809 3 Outlander 500 09-12, Outlander 650 09-12, Outlander 800 09-11 Round brushed muffler w/ Euro-polished end cap (clamp mount) Required 1831-0820 3 Outlander 500L 15, Outlander 570L 16, Outlander 570 17-22 Round brushed muffler w/ Euro-polished end cap (center mount) Required 1831-0812 3 Round brushed muffler w/ turn-down brushed end cap (center mount) Required 1831-1057 3 Round gun metal muffler w/ Euro-blackout end cap (center mount) Required 1831-0813 3 EXHAUST SYSTEMS (CONT)
BOLD MAGENTA part numbers are new for 2025 EXHAUST PARTSCANADA.COM ATV/UTV | 2025 EXHAUST 19 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. PERFORMANCE SERIES 4” EXHAUST SYSTEMS AND SLIP-ON MUFFLERS (CONT) SLIP-ON MUFFLERS (CONT) FITS MODEL DESCRIPTION FUEL TUNING PART # EMIS* CAN-AM (CONT) Renegade 500 08-12, Renegade 800 07-12 Round brushed muffler w/ Euro-polished end cap (clamp mount) Required 1831-0820 3 Outlander 1000 12-24 Round black muffler w/ Euro-black end cap (side mount) Required 1831-0795 3 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0796 3 Round brushed muffler w/ turn-down brushed end cap (side mount) Required 1831-0797 3 Round gun metal muffler w/ Euro-blackout end cap (side mount) Required 1831-0798 3 Maverick 1000R/X/X ds 13-18, Maverick MAX 1000R/X ds 14-18 (except 1000R Turbo 15-18) Dual round black mufflers w/ Euro-black end caps (center mount) Required 1831-0777 3 Dual round brushed mufflers w/ Euro-polished end caps (center mount) Required 1831-0778 3 Dual round gun metal mufflers w/ Euro-blackout end caps (center mount) Required 1831-0779 3 HONDA TRX250 Recon 97-01 Round brushed muffler w/ turn-down black end cap (side mount) Required 1831-0838 3 TRX250X 87-92,TRX300EX 93-12 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0847 3 Round brushed muffler w/ turn-down brushed end cap (side mount) Required 1831-0998 3 TRX350 Rancher 00-06 Round brushed muffler w/ turn-down brushed end cap (side mount) Required 1831-0835 3 TRX400 Rancher 04-07 Round brushed muffler w/ turn-down brushed end cap (side mount) Required 1831-0836 3 TRX400EX 99-14 Round black muffler w/ Euro-black end cap (side mount) Required 1831-0849 3 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0850 3 Round gun metal muffler w/ Euro-blackout end cap (side mount) Required 1831-0851 3 Round red muffler w/ Euro-polished end cap (side mount) Required 1831-0852 3 TRX450 FourTrax Foreman 98-01 Round brushed muffler w/ turn-down brushed end cap (side mount) Required 1831-0824 3 TRX450R 04-05 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0854 3 Round gun metal muffler w/ Euro-blackout end cap (side mount) Required 1831-0855 3 TRX450R 06-14 Round black muffler w/ Euro-black end cap (side mount) Required 1831-0858 3 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0859 3 Round gun metal muffler w/ Euro-blackout end cap (side mount) Required 1831-0860 3 TRX500 Foreman Rubicon 01-14, TRX500 Foreman 05-11 Round brushed muffler w/ turn-down brushed end cap (side mount) Required 1831-0825 3 TRX650/680 Rincon 03-23 Round gun metal muffler w/ Euro-polished end cap (side mount) Required 1831-0841 3 TRX700XX 08-09 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0861 3 KAWASAKI KFX400 04-06 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0904 3 Round gun metal muffler w/ Euro-blackout end cap (side mount) Required 1831-0905 3 KFX700 04-10 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0867 3 Round green muffler w/ Euro-black end cap (side mount) Required 1831-0868 3 POLARIS Outlaw/Sportsman 90 09-14, Outlaw/Sportsman 110 16-25 Round black muffler w/ Mini end cap and spark arrester (side mount) Not required 1831-0876 3 Round Venom green muffler w/ Mini end cap and spark arrester (side mount) Not required 1831-0878 3 RZR XP/XP 4 Turbo/Turbo S 16-21 Dual round brushed mufflers w/ turned-down end caps (center mount) Required 1831-0783 3 SUZUKI LT-Z400 QuadSport 03-14 Round gun metal muffler w/ Euro-blackout end cap (side mount) Required 1831-0905 3 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0904 3 LT-R 450 QuadRacer 06-09 Elliptical brushed muffler w/ Euro-polished end cap (seat mount) Required 1831-0900 3 LT-A500 Vinson 02-07 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0902 3 LT-A700/750 KingQuad 05-22 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0895 3 Round gun metal muffler w/ Euro-blackout end cap (side mount) Required 1831-0896 3 YAMAHA YFM350 Bruin 04-06,YFM350 Grizzly 07-11, YFM350 Wolverine 06-09 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0924 3 Round brushed muffler w/ turn-down brushed end cap (side mount) Required 1831-0926 3 YFM400 Big Bear 00-12 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0908 3 YFZ450R/X 09-22 Elliptical brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0954 3 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0956 3 YFM550 Grizzly 09-14,YFM700 Grizzly 07-13 Round black muffler w/ Euro-black end cap (side mount) Required 1831-0911 3 YFM600 Grizzly 98-01 Round brushed muffler w/ Euro-polished end cap (side mount) Required 1831-0920 3 YXZ1000R/SS/SE 16-22 Elliptical blue muffler w/ Euro-black end cap (side mount) Required 1831-0957 3 Elliptical gun metal muffler w/ Euro-blackout end cap (side mount) Required 1831-0959 3
BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | ATV/UTV EXHAUST EXHAUST 20 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. FITS MODEL MUFFLER STYLE DESCRIPTION PART # EMIS* CAN-AM Outlander 500-650/MAX 13-21, Outlander 800-1000 12-21, Outlander 800-1000 MAX 13-21 Quiet Swamp Round stainless muffler w/ snorkel end cap (side mount) 1831-0800 3 Loud Swamp XL Round stainless muffler w/ snorkel end cap (side mount) 1831-0801 3 Renegade 500-570 13-17, Renegade 800/850 12-17, Renegade 1000 12-21 Quiet Swamp Round stainless muffler w/ snorkel end cap (seat mount) 1831-0816 3 Loud Swamp XL Round stainless muffler w/ snorkel end cap (seat mount) 1831-0817 3 HONDA TRX650/680 Rincon 03-21 Quiet Swamp Round stainless muffler w/ snorkel end cap (side mount) 1831-0842 3 Loud Swamp XL Round stainless muffler w/ snorkel end cap (side mount) 1831-0843 3 POLARIS Sportsman XP 550/850 11-16 Quiet Swamp Round stainless muffler w/ snorkel end cap (side mount) 1831-0887 3 YAMAHA YFM550 Grizzly 09-14,YFM700 Grizzly 07-20, YFM700 Kodiak 16-21 Loud Swamp XL Round stainless muffler w/ snorkel end cap (side mount) 1831-0915 3 SWAMP SERIES 5” SLIP-ON MUFFLERS •Setting new standards for horsepower, sound and durability on utility machines •Features a removable snorkel system designed to keep the engine running while submerged and is perfect for riders looking to take their machines into some deep mud •Large stainless steel shell has more internal volume to create more horsepower at lower sound levels • 304 stainless steel resists corrosion, rust and stains from water •Quiet Swamp versions feature a mechanical core design that produces incredible horsepower while keeping the sound levels to a minimum •Loud Swamp XL versions feature an unrestricted core design that produces maximum horsepower at an incredibly loud volume NOTE: Fuel tuning required when installing. Failure to tune the engine can cause excessive damage to the exhaust system and engine. 1831-0887
RkJQdWJsaXNoZXIy NDI5NTY=