BOLD MAGENTA part numbers are new for 2025 AUDIO/COMMUNICATION & MOUNTS PARTSCANADA.COM ATV/UTV | 2025 167 RAM® MOUNT MALE-THREAD BASES WITH 1” BALL •Powdercoated marine-grade aluminum and rubber construction • Choice of M10 x 1.25 pitch or M10 x 1.50 pitch thread; both with 1” B-size rubber ball • PART #0636-0063 features M10 1.25 pitch male thread connected to a 1” rubber ball; the diameter of the round flange is 14.5 mm and the thread length is 10.15 mm • PART #0636-0064 features M10 x 1.5 pitch male thread connected to a 1” rubber ball; the diameter of the round flange is 14.3 mm and the thread length is 10.5 mm RAM® MOUNT MOTORCYCLE FORK STEM BASE WITH 1” BALL •Cleanest way to mount small electronics on your motorcycle •Slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit •Designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 0.5” to 1.10” •Powdercoated marine-grade aluminum NOTE: Certain motorcycles require adding electrical tape to the area of the plug that has the largest diameter until it fits snugly in the stem. RAM® TOUGH-TRACK™ TOP-LOADING COMPOSITE 3”TRACK •High-strength composite •Can be drilled to any flat surface •Designed to use with #10 screws for easy installation, hardware not included •Works with a wide variety of RAM® track bases to attach cameras, fishing rods, phones, etc. • Track thickness 0.35”, inside track length 3” • Dimensions: 4.75” L x 1.75” W RAM® TOUGH-BALL™ WITH THREADED STUD • 1” diameter rubber ball connected to a male-threaded post •High-strength composite and steel • B-size 1” rubber ball; M6-1 x 6 mm threaded post DESCRIPTION PART # M10 x 1.25 base 0636-0063 DESCRIPTION PART # M10 x 1.5 base 0636-0064 DESCRIPTION PART # X-Grip® mount w/ fork stem base 0603-0898 DESCRIPTION PART # Fork stem base w/ 1” ball 0603-0457 DESCRIPTION PART # Tough-Track™ composite 3” track 0603-0827 DESCRIPTION PART # RAM® Tough-Ball™ w/ 6 mm threaded stud 0636-0151 0603-0457 0636-0063 DESCRIPTION PART # RAM® Track Ball™ w/ T-bolt attachment 0603-0828 RAM® TRACK BALL™ WITH T-BOLT ATTACHMENT • B-size, 1” rubber ball molded to a high-strength composite base • Rubber friction washer and a stainless steel T-bolt for sliding into virtually any track system • Insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten in place; twist counterclockwise to loosen
RkJQdWJsaXNoZXIy NDI5NTY=