BOLD MAGENTA part numbers are new for 2025 AUDIO/COMMUNICATION & MOUNTS PARTSCANADA.COM ATV/UTV | 2025 171 DESCRIPTION PART # Universal Finger-Grip™ cradle 0603-0477 RAM® UNIVERSAL FINGER-GRIP™ CRADLE •This mount is designed to hold cell phones (check measurements below for dimensions) and electronic devices •High-strength composite •Comes with three sets of four flexible rubber-coated fingers placed along the sides to grip your device •The fingers open by squeezing the ends of the holder •The bottom of the holder includes a back plate that adds support to the device being held by the mount •Can also be used with several other phone accessories • The spine plate contains the universal AMPS and 1.5” x 2” hole patterns •Height dimensions: minimum with top and bottom plates is 5.25” and maximum with top and bottom plates is 6.0” •The top and bottom plates can be removed for larger devices • Spine plate dimensions: 3”W x 3” H •Using short-arm side clamps: maximum depth is 0.75”, minimum width is 1.25” and maximum width is 3.0” DESCRIPTION PART # GARMIN Astro® 220/GPS 60/GPSMAP 60/60C/60CSx/60Cx 0603-0488 Astro 320/GPSMAP 62/62s/62sc/62st/62stc 0603-0491 eTrex Legend® 10/20/30 0603-0568 eTrex Legend C/Cx/HCx/Venture Cx/Hc/Vista C/Cx/HCx 0603-0483 nüvi® 50/50LM 0603-0494 nüvi 65/66/67 0603-0895 nüvi 2595LMT 0603-0569 DESCRIPTION PART # GARMIN (CONT) nüvi 1300/1310T/1350/1350T/1370T/1390/ 1390T/2455LT/2455LMT/2475LT/2495LMT 0603-0490 nüvi 1440/1450/1490T 0603-0480 Montana® 600/650/650t 0603-0567 Oregon™ 200/300/400c/400i/400t/550/550t 0603-0565 zumo™ 400/450/500/550/660 0603-05701 SPOT Rider 2/Urban Rider 0603-05701 1 Includes 1” diameter rubber ball. RAM® CRADLES FOR GPS •High-strength composite construction •Includes a set of two nuts and bolts to connect to any of the RAM®-compatible mounts •Contents not included NOTE: Does not come with ball mount adapter; use PART #0603-0472 to mount to RAM® double-socket arm. •Using medium-arm side clamps: maximum depth is 1.25”, minimum width is 1.5” and maximum width is 3.5” •Using long-arm side clamps: maximum depth is 1.6”, minimum width is 2.25” and maximum width is 3.5” •Made in the U.S.A. NOTE: Does not come with ball mount adapter; use PART #0603-0472 to mount to RAM® double-socket arm. 0603-0488 0603-0491 0603-0494 0603-0565 0603-0568 0603-0569 0603-0570
RkJQdWJsaXNoZXIy NDI5NTY=