BOLD MAGENTA part numbers are new for 2025 PLOWS & IMPLEMENTS PARTSCANADA.COM ATV/UTV | 2025 67 DESCRIPTION PART # Standard 2.0 glacier adapter w/ square tubes 4501-1127 Tall 2.0 glacier adapter w/ square tubes 4501-1248 2.0 GLACIER ADAPTER •Designed for full-size Polaris Rangers with the Glacier bumper •Mid-size machines (unless modified) are too low to use the Glacier Adapter properly •Optimal height of the Glacier mounting location should be 14” from the ground NOTE: If this mount fits on your full-size machine but you have (or are going to install) tracks, larger tires, or a lift kit, we would recommend using the alternate mount (PART #4501-1077) so that it will be compatible with our push tube leveling kits. 4501-1127 4501-1248 DESCRIPTION PART # Standard actuator bracket 4501-1005 DESCRIPTION PART # Track actuator bracket 4501-1175 ACTUATOR BRACKETS •Actuator bracket kit for plow angle adjustment • Specifically designed for use with KFI UTV Tubes •Rotates up to full 25° on both directions •Requires drilling •Made in the U.S.A. 4501-1005 4501-1175 DESCRIPTION PART # Actuator 50A relay 4501-1131 Actuator bracket kit 4501-1121 Actuator end seal 4501-1123 DESCRIPTION PART # Actuator harness cap 4501-1130 Actuator motor 4501-1125 Actuator rod end 4501-1124 DESCRIPTION PART # Actuator shaft replacement 4501-1122 Actuator switch rocker 4501-1128 DESCRIPTION PART # Replacement plow hydraulic actuator 4501-1126 Wire harness hydraulic actuator 4501-1120 PLOW ACTUATOR REPLACEMENT PARTS •Sold separately 4501-1120 4501-1121 4501-1122 4501-1123 4501-1124 4501-1125 4501-1126 4501-1128 4501-1130 4501-1131 DESCRIPTION PART # UTV plow track extension actuator replacement brackets 4501-1177 UTV PLOW TRACK EXTENSION ACTUATOR REPLACEMENT BRACKETS •Requires UTV track extension •Specifically designed for use with KFI UTV tubes and open trail tubes •Does not include the tube system (sold separately) •Does not include actuator (sold separately) •Requires drilling DESCRIPTION PART # Plow actuator backlit dash-mounted rocker switch 4501-1298 PLOW ACTUATOR BACKLIT DASH ROCKER SWITCH •Designed for use with the plow hydraulic actuator, PART #4501-1126 and OEM PART #ACT-HAR (not included) •Operates a single actuator PART #4501-1126 •Pro-V plow system requires two of these kits NOTE: Does not work with the wire harness hydraulic actuator, PART #4501-1120 (OEM #105940). •Powdercoated tough •Made in the U.S.A.
RkJQdWJsaXNoZXIy NDI5NTY=