WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 18 All part numbers in BLUE are new for 2025. 1351 See OLDBOOK For Early Model Applications HUGGER SERIES FRONT FENDERS •Steel fenders are thick enough to add rigidity to the front end by acting like a fork brace, but can still be cut or shaped enough for an even more Kustom appearance •All fenders come predrilled and are stamped, not spun, to ensure a consistent finish and minimize body work •E-coated to prevent rust and corrosion •16”, 17”, 18” and 19” fenders measure 6.25” outside width and will accommodate up to a 130 series tire •21” styles measure 5.875” outside width and will fit the current 120/70-21 series tires on 3.5” wide rims •21” Narrow measure 4.5” outside width and will fit models listed with the stock narrow rim and a tire up to 100/100-21 BENCHMARK FRONT FENDERS FOR SOFTAIL •Stamped from 14-gauge U.S. steel, these 6 1/2” wide fenders are E-coated to prevent rust and corrosion with the best paint prep in the industry •The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work •Fenders for FXS/FXST/FLST models are predrilled to fit 16”/17”/18”, or 21” front wheels •Fender for FLS models is predrilled to fit 16”/17”/18”/19” front wheels (up to 140 series tires) •May also be used in a variety of custom applications •No mounting blocks required •Made in the U.S.A. WFB™ BENCHMARK FRONT FENDER FOR DRESSER •Stamped from 14-gauge U.S. steel, this 6 1/2” wide fender is E-coated to prevent rust and corrosion with the lowest paint prep in the industry •Fender is predrilled for 21” front wheels for a very radically Kustom look •Rivetless smooth sides and an extended 1.5” rear tail; fender bis a great match for any rear fender and adds a clean yet dramatic flow to your stock FL •The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work •Installation requires use of Klock Blocks front fender mounting blocks available separately, PART #s 1410-0022 and 1410-0023 •The Benchmark fender can be paired with the WFB™ rear fender to complete the Klock Werks Kustom look •Made in the U.S.A. PART # DESCRIPTION 1401-0194 For 99-23 FLT/FLHT/FLHX/FLHR/FLTR and H-D FL Trike PART # DESCRIPTION FOR 00-17 FXS/FXST/FLST (EXCEPT SPRINGERS) AND CUSTOM APPLICATIONS 1401-0197 16”/17”/18” front wheel 1401-0195 21” front wheel PART # DESCRIPTION FOR 12-17 FLS 1401-0624 16”/17”/18”/19” front wheel (up to 140 series tire) FOR 18-23 FLHC/FLHCS/FLDE/FLSL PART # DESCRIPTION 16”/17”/18”/19” FRONT WHEEL 1401-0671 Wrapper 21” FRONT WHEEL 1401-0672 Wrapper FOR 00-13 FXS/FXST/FXSTB/FXSTC, 99-05 FXDWG AND CUSTOM APPLICATIONS PART # DESCRIPTION 21” FRONT WHEEL (REQUIRE MOUNTING BLOCKS PART #1410-0043 OR 1410-0044) 1401-0219 Slicer 1401-0223 Wrapper FOR 00-17 FLST (ALL EXCEPT SPRINGER) PART # DESCRIPTION 21” FRONT WHEEL (REQUIRE MOUNTING BLOCKS PART #1410-0031 OR 1410-0032) 1401-0265 Thickster 1401-0267 Wrapper NARROW FOR 00-13 FXS/FXST/FXSTB/FXSTC, 99-05 FXDWG AND CUSTOM APPLICATIONS WITH UP TO 100/100-21 SERIES TIRES PART # DESCRIPTION 21” FRONT WHEEL (REQUIRE MOUNTING BLOCKS PART #1410-0045 OR 1410-0046) 1401-0282 Slicer FOR 99-05 FXD PART # DESCRIPTION 19” FRONT WHEEL 1401-0530 Wrapper •18-23 models include satin finish fender spacers •Installation requires the use of Klock Werks Hugger mounting blocks (sold separately), see page 1359 •Made in the U.S.A. Thickster Slicer Wrapper 1401-0195 1401-0624
RkJQdWJsaXNoZXIy NDI5NTY=