BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | OFFROAD HANDLEBARS & HAND CONTROLS 126 2” PIVOTING BAR RISERS FOR 1 1/4” HANDLEBARS FOR BMW S1000XR 14-20, R1200/1250GS WATERCOOLED 13-20 • 2” rise with 1 1/4” stem •Accept 1 1/4” handlebars •Pivot forward or backward depending on rider preference •Work with stock cables •The risers come with low-profile caps to replace the OEM bar clamp caps DESCRIPTION PART # 2” Pivoting bar risers for 1 1/4” handlebars 0602-0791 ANTI-VIBRATION 2” PIVOT RISERS •Independent left and right risers adapt to any handlebar clamp width •Anti-Vibe design reduces vibration in bars and helps reduce rider fatigue •Dual rotation points allow rider to select optimum riding position for comfort and control •PART #s 0602-0362 and 0602-0907 allow you to clamp 7/8” or 1 1/8” taper bars •Engineered and tested for maximum strength and durability •CNC machined from billet 6061-T6 aluminum •Made in the U.S.A. Patent # US 6,920,806 BZ. DESCRIPTION COLOR PART # For 7/8” bar clamps and 7/8” or 1 1/8” handlebars Natural aluminum 0602-0362 Black anodized 0602-0907 DESCRIPTION COLOR PART # For 1 1/8” bar clamps and 1 1/8” handlebars Natural aluminum 0602-0644 Black anodized 0602-0985 EXTENDED STEM 2” PIVOTING BAR RISERS FOR 1 1/8” HANDLEBARS • 2” center-to-center rise with 1 1/8” stem •Pivot backward/forward based on rider preference •Accept 1 1/8” handlebar •Extended stem on the bottom portion of the riser makes for a great fit for the 14 and newer Yamaha Super Tenere and other bikes with angled handlebar clamps •Feature matte silver or anodized black finish NOTE: Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers. DESCRIPTION PART # Black anodized 0602-0793 DESCRIPTION PART # Silver matte 0602-0792 ROX PIVOTING HANDLEBAR RISERS FOR 1 1/8” BAR CLAMPS •Very popular addition for the BMW F800GS, KTM 690 Enduro and 990/1190 Adventure • Also fit many other street, off-road and dual sport models with a 1 1/8” stem clamp and a 1 1/8” handlebar •Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position •Engineered and tested for maximum strength and durability FINISH PART # 1 3/4” PIVOTING RISERS FOR BMW F800/850GS, KAWASAKI VERSYS 1000, KTM 250/300/450/500 EXC AND 690/990/1190/120 ADV/SUPER ADV Clear anodized 0602-0438 Black anodized 0602-0658 KTM special edition orange 0602-0909 FINISH PART # 2” PIVOTING RISERS FOR BMW F800GT, R1200GS THROUGH 12, R NINET, DUCATI HYPERMOTARD, MULTISTRADA 10-20, HONDA AFRICA TWIN, KTM 250/300 XC, 350/450 EXC/XC/SX-F, 500 EXC/XC, 690 E/R, 990 ADV/BAJA/ SUPER ENDURO, 1190 ADV, 1290 SUPER ADV, MOTO GUZZI STELVIO 1200,TRIUMPH TIGER 800 XC/XCS 11-17,TIGER 800 STREET/ROAD 11-17,TIGER 1200 EXPLORER, YAMAHA SUPER TENERE THRU 13 Natural aluminum 0602-0437 Clear anodized 0602-0651 Gray anodized 0602-0652 Black anodized 0602-0653 •Feature a clear anodized finish •Made in the U.S.A. NOTE: Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers. NOTE: Confirm you have sufficient clearance below Anti-Vibe bolt when turned full left or right; bolt extends below OE saddle clamp 7/8”. NOTE: Longer cables may be required when installing handlebar risers. NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. 0602-0644 0602-0985 0602-0793 0602-0792 • CNC machined from billet 6061-T6 aluminum, then anodized for long-lasting good looks •Made in the U.S.A. NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. 0602-0651 0602-0652 0602-0658 0602-0909 0602-0438
RkJQdWJsaXNoZXIy NDI5NTY=