BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | OFFROAD EXHAUST EXHAUST 48 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # 4-stroke muffler packing 1860-2211 4-STROKE MUFFLER PACKING •Great product to use when rebuilding your 4-stroke muffler •Resists breakdown up to 649 °C (1,200 °F) •11”L x 16”W x 1”T •Made in the U.S.A. DESCRIPTION PART # 15” muffler core sleeve 1860-0473 19” muffler core sleeve 1860-0474 MUFFLER CORE SLEEVES •Two-layer wrap consists of 304 stainless wire cloth and a very durable, high-temp stainless steel wool •Keeps engine performance and sound levels more consistent compared to packing fiber directly around the core •Can be easily trimmed with scissors for shorter mufflers • Designed to fit cores from 1.75” to 2.125” •Stainless steel wire is included to secure the wrap in place around the core •Increases intervals between re-packs by 3 to 5 times •Works great with the Moose Racing Packing Pillow •Made in the U.S.A. DESCRIPTION PART # Fiberglass muffler packing M701 FIBERGLASS MUFFLER PACKING •Repack blown-out silencers for more power and a quieter ride •Long filament fiberglass made especially for muffler packing • Measures 10.5” x 16”, more than enough to repack virtually any 2-stroke silencer •Resists breakdown up to 649 °C (1200 °F) •Made in the U.S.A. DESCRIPTION PART # 2” x 36” strip 1861-0153 DESCRIPTION PART # 18” x 18” sheet M30051 HEAT SHIELDS •Aluminized heat barrier with adhesive backing •Foil-coated fiberglass cloth adheres to body panels to protect plastic or fiberglass from engine or exhaust heat • One 18” x 18” sheet provides 324 square inches of superior heat protection • Also available in a long narrow strip sized 2” x 36” •Made in the U.S.A. FITS MODEL PART # HARDWARE KITS BETA 200/250/300 RR (all) 13-25 1860-2457 Xtrainer 15-25 1860-2457 300 RX 21-25 1860-2457 GASGAS MC 50 21-25 1860-1274 MC 65 21-23 1860-1274 MC 85 21-24 1860-1274 MC 125 21-25 1860-1275 EC/EX 250 21-25 1860-1276 MC 250 21-25 1860-1276 EC/EX 300 21-25 1860-1276 HUSQVARNA TC 50 17-25 1860-1273 FITS MODEL PART # HARDWARE KITS (CONT) HUSQVARNA (CONT) TC 65 17-25 1860-1274 TC 85 14-24 1860-1274 TE 125 15-16 1860-1275 TC 125 14-22 1860-1275 TE 150 17-24 1860-1275 TC 250 14-22 1860-1276 TE 250 14-25 1860-1276 TE 300 14-25 1860-1276 TX 300 17-25 1860-1276 KTM 50 SX 02-25 1860-1273 65 SX/85 SX 02-25 1860-1274 105 SX 04-11 1860-1274 FITS MODEL PART # HARDWARE KITS (CONT) KTM (CONT) 125 cc to 150 cc 00-25 1860-1275 150 XC-W 17-23 1860-1276 200cc 11-16 1860-1276 All 250cc 2-Stroke 99-25 1860-1276 All 300cc 2-Stroke 99-25 1860-1276 YAMAHA YZ125 01-25 1860-1277 YZ250 01-25 1860-1278 EXHAUST MOUNTS GASGAS 125/200/250/300 (all) 13-23 1860-2458 MC50-85 21-25 1860-1272 FITS MODEL PART # EXHAUST MOUNTS (CONT) GASGAS (CONT) MC50 - MC85 21-23 1860-1272 HUSQVARNA TC 50/65 17-25 1860-1272 TC 85 14-24 1860-1272 TE 125 15-16 1860-1272 TC 125/250 14-19 1860-1272 TE 150 17-18 1860-1272 TE 250/300 14-19 1860-1272 TX 300 17-19 1860-1272 KTM 50/65/85 SX 02-25 1860-1272 150/250/300 XC-W 98-19 1860-1272 105-300 2-stroke 98-18 1860-1272 EXHAUST HARDWARE KITS • Hardware kits contain model-specific green Viton® rubber pipe O-rings, pipe-to-silencer coupler and springs •Exhaust mount PART #1860-1272 includes two KTM-style pipe mounts, two clip nuts and four fasteners; fits all KTM 50cc to 300cc 2-strokes 1860-0474 1861-0153 M30051 1860-1272 1860-1273 1860-1276 1860-1277
RkJQdWJsaXNoZXIy NDI5NTY=